在Ubuntu下ADT识别不出真机的解决办法

        前两天把系统换成Ubuntu 12.04，今天在写代码的时候准备真机调试，结果ADT识别不出真机，我擦。果断网上查找了一下解决办法，通过半个小时左右的折腾，尼玛，终于搞定了。具体解决办法以下：

1.先插上手机在命令行下输入lsusb指令

sxd@sxd-ThinkPad-T400:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0425:0001 Motorola Semiconductors HK, Ltd
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data Rate II
Bus 002 Device 006: ID 18d1:9025 Google Inc.
sxd@sxd-ThinkPad-T400:~$

2.拔掉手机，再次输入lsusb

sxd@sxd-ThinkPad-T400:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0425:0001 Motorola Semiconductors HK, Ltd
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data Rate II
sxd@sxd-ThinkPad-T400:~$

经过对比，能够肯定Bus 002 Device 006: ID 18d1:9025 Google Inc.就是对应真机关联的ID。

3. 输入如下命令

sxd@sxd-ThinkPad-T400:~$ cd /etc/udev/rules.d/

sxd@sxd-ThinkPad-T400:/etc/udev/rules.d$ sudo gedit 88-android.rules

建立一个名为88-android.rules的文件，文件名能够任意取。而后编辑，写入一下内容，以后保存关闭。

SUBSYSTEM=="usb", SYSFS{idVendor}=="18d1", MODE=="0666"
SUBSYSTEM=="usb_device", SYSFS{idVendor}=="18d1", MODE=="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="9025", MODE=="0600,"SYMLINK+="android_adb"

 4.保存后给予权限：

sudo chmod a+rx/etc/udev/rules.d/88-android.rules

5. sudo /etc/init.d/udev restart  或者 sudo restartudev
   

6. 切换到ADT sdk plam-tools文件夹下，重启adb相关操做。

cd /home/sxd/Android_ADT/adt-bundle-linux-x86_64-20131030/sdk/platform-tools

sudo ./adb kill-server
sudo ./adb start-server
sudo  ./adb device

说明：测试的真机是 小米1S (MI OneS)

参考：

http://blog.csdn.net/yunnywu/article/details/8550834

http://blog.chinaunix.net/uid-24856020-id-3388654.html