linux运维、架构之路-LVS负载均衡

1、LVS介绍

一、介绍   

       LVS是Linux Virtual Server的简写，是linux虚拟的服务器集群系统，能够在unix/linux平台下实现负载均衡集群功能，由章文嵩博士组织成立，是国内出现最先的自由软件之一。

LVS项目介绍	
http://www.linuxvirtualserver.org/zh/lvs1.html
LVS集群的体系结构	
http://www.linuxvirtualserver.org/zh/lvs2.html
LVS集群中的IP负载均衡技术	
http://www.linuxvirtualserver.org/zh/lvs3.html
LVS集群的负载调度	
http://www.linuxvirtualserver.org/zh/lvs4.html　　

二、LVS特性

①真正实现负载调度的工具是IPVS，工做在linux内核层面。
②LVS自带的IPVS管理工具是ipvsadm。
③keepalived实现管理IPVS及对负载均衡器的高可用。

三、LVS——DR模式工做原理

四、LVS集群其它模式

①DR直接路由模式(重点掌握)

②NAT

③TUN隧道模式

④FULLNAT

五、LVS应用场景

      日PV1000-2000W或者并发请求1W如下的均可以使用Nginx，超过的话使用LVS，大型门户网站，电商网站须要用到

2、手工配置LVS

一、环境

[root@lb01 ~]# cat /etc/redhat-release 
CentOS Linux release 7.2.1511 (Core) 
[root@lb01 ~]# uname -r
3.10.0-327.el7.x86_64
[root@lb01 ~]# getenforce 
Disabled
[root@lb01 ~]# systemctl status firewalld.service 
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
[root@lb01 ~]# hostname -I
10.0.0.5 172.16.1.5

二、安装ipvsadm管理工具

①检测是否安装

[root@lb01 ~]# lsmod |grep ip_vs

②安装ipvsadm

yum -y install ipvsadm

③检查并激活lvs

[root@lb01 ~]# ipvsadm
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
[root@lb01 ~]# lsmod |grep ip_vs
ip_vs                 140944  0 
nf_conntrack          105745  1 ip_vs
libcrc32c              12644  2 xfs,ip_vs

三、配置LVS负载均衡(lb01操做)

ip addr add 10.0.0.3/24 dev eth0 #在eth0网卡绑定VIP地址
ipvsadm -C   #清除当前全部LVS规则                 
ipvsadm --set 30 5 60      #设置tcp、tcpfin、udp连接超时时间   
ipvsadm -A -t 10.0.0.3:80 -s wrr -p 20   #添加虚拟服务（-A）
ipvsadm -a -t 10.0.0.3:80 -r 10.0.0.7:80 -g -w 1 #将虚拟服务关联到真实服务上（-a）
ipvsadm -a -t 10.0.0.3:80 -r 10.0.0.8:80 -g -w 1 #将虚拟服务关联到真实服务上（-a）
ipvsadm -ln #查看配置结果

-C 清空整个表
-A 添加一个虚拟服务
-t 指定一个地址，必定是ip+端口
-s 调度算法
-a 添加一个real server
-m NAT模式
-g DR模式，默认
-d 删除一个real server
-p 会话保持功能
-w 权重
-i tunnel模式

四、web服务器操做(web0一、web02)

①在lo网卡绑定VIP地址

ip addr add 10.0.0.3/32 dev lo

②修改内核参数抑制ARP响应

cat >>/etc/sysctl.conf<<EOF
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
EOF
sysctl -p

五、在lb02上面测试

[root@lb02 ~]# curl 10.0.0.3
web02
[root@lb02 ~]# curl 10.0.0.3
web02
[root@lb02 ~]# curl 10.0.0.3
web02
[root@lb02 ~]# curl 10.0.0.3
web02
[root@lb02 ~]# curl 10.0.0.3
web02
[root@lb02 ~]# curl 10.0.0.3
web01
[root@lb02 ~]# curl 10.0.0.3
web01

3、Keepalived配合LVS实现高可用负载均衡

一、安装Keepalived

yum -y install keepalived

二、配置keepalived管理LVS

global_defs {    router_id LVS_01 } vrrp_instance VI_1 {     state MASTER     interface eth0     virtual_router_id 51     priority 150     advert_int 1     authentication {         auth_type PASS         auth_pass 1111     }     virtual_ipaddress {      10.0.0.3/24     } } virtual_server 10.0.0.3 80 {     delay_loop 6                       lb_algo wrr                    lb_kind DR                    nat_mask 255.255.255.0     persistence_timeout 50         protocol TCP                    real_server 10.0.0.7 80 {         weight 1                      TCP_CHECK {         connect_timeout 8               nb_get_retry 3         delay_before_retry 3         connect_port 80         }     }       real_server 10.0.0.8 80 {         weight 1                      TCP_CHECK {         connect_timeout 8               nb_get_retry 3         delay_before_retry 3         connect_port 80         }     } }

global_defs {    router_id LVS_02 } vrrp_instance VI_1 {     state BACKUP     interface eth0     virtual_router_id 51     priority 100     advert_int 1     authentication {         auth_type PASS         auth_pass 1111     }     virtual_ipaddress {      10.0.0.3/24     } } virtual_server 10.0.0.3 80 {     delay_loop 6              lb_algo wrr                    lb_kind DR                    nat_mask 255.255.255.0     persistence_timeout 50         protocol TCP                    real_server 10.0.0.7 80 {         weight 1                      TCP_CHECK {         connect_timeout 8               nb_get_retry 3         delay_before_retry 3         connect_port 80         }     }       real_server 10.0.0.8 80 {         weight 1                      TCP_CHECK {         connect_timeout 8               nb_get_retry 3         delay_before_retry 3         connect_port 80         }     } }

 三、测试keepalived高可用，故障转移

①停掉lb01的keepalvied

[root@lb01 ~]# systemctl stop keepalived.service
[root@lb01 ~]# curl 10.0.0.3
web01

②停掉lb02的keepalvied

[root@lb02 ~]# systemctl stop keepalived.service
[root@lb02 ~]# curl 10.0.0.3
web01

四、测试Keepalived对后端节点的健康检查功能

①web后端正常时状态

[root@lb01 ~]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.3:80 wrr persistent 50
  -> 10.0.0.7:80                  Route   1      0          0         
  -> 10.0.0.8:80                  Route   1      0          0 

②web后端节点宕机或者服务关闭时(此处关闭了web01)

[root@lb01 ~]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.3:80 wrr persistent 50
  -> 10.0.0.7:80                  Route   1      0          0 

五、Keepalived+LVS多实例配置

①lb01

global_defs {
   router_id LVS_01
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 150
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
     10.0.0.3/24
    }
}

vrrp_instance VI_2 {
    state BACKUP
    interface eth0
    virtual_router_id 52
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 2222
    }
    virtual_ipaddress {
     10.0.0.4/24
    }
}

virtual_server 10.0.0.3 80 {
    delay_loop 6              
    lb_algo wrr                
    lb_kind DR                
    nat_mask 255.255.255.0
    persistence_timeout 50     
    protocol TCP                

    real_server 10.0.0.7 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }

    real_server 10.0.0.8 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }
}

virtual_server 10.0.0.4 80 {
    delay_loop 6          
    lb_algo wrr                
    lb_kind DR                
    nat_mask 255.255.255.0
    persistence_timeout 50     
    protocol TCP                

    real_server 10.0.0.7 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }

    real_server 10.0.0.8 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }
}

②lb02

global_defs {
   router_id LVS_02
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
     10.0.0.3/24
    }
}

vrrp_instance VI_2 {
    state MASTER
    interface eth0
    virtual_router_id 52
    priority 150
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 2222
    }
    virtual_ipaddress {
     10.0.0.4/24
    }
}

virtual_server 10.0.0.3 80 {
    delay_loop 6          
    lb_algo wrr                
    lb_kind DR                
    nat_mask 255.255.255.0
    persistence_timeout 50     
    protocol TCP                

    real_server 10.0.0.7 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }

    real_server 10.0.0.8 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }
}

virtual_server 10.0.0.4 80 {
    delay_loop 6          
    lb_algo wrr                
    lb_kind DR                
    nat_mask 255.255.255.0
    persistence_timeout 50     
    protocol TCP                

    real_server 10.0.0.7 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }

    real_server 10.0.0.8 80 {
        weight 1              
        TCP_CHECK {
        connect_timeout 8       
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }
}