Exchange server 2013 服务器的部署与配置

1.1 Exchange server 2013 服务器的部署与配置

在windows server 2012下安装Exchange 2013:

1) 系统组件准备（在Windows Server 2012 PowerShell中执行以下命令）

Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation,RSAT-ADDS –Restart

2） 软件准备

在安装操做系统角色和功能后，安装如下软件：

◆ Microsoft Unified Communications Managed API 4.0, Core Runtime 64bit （http://www.microsoft.com/en-us/download/details.aspx?id=34992）

install the Unified Communications Managed API 4.0:

Start-BitsTransfer -Source http://download.microsoft.com/download/2/C/4/2C47A5C1-A1F3-4843-B9FE-84C0032C61EC/UcmaRuntimeSetup.exe -Destination c:\temp

c:\temp\UcmaRuntimeSetup.exe /q

3.PrepareAD

Setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms

Setup.exe /PrepareAD /OrganizationName:NBIS /IacceptExchangeServerLicenseTerms

Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms

4. Install exchange 2013

Setup.exe /Mode:Install /Roles:Mailbox,ClientAccess /Mdbname:MDB01 /DbFilePath D:\Exchange\MDB01\DBFiles\MDB01.edb /LogFolderPath D:\Exchange\MDB01\LogFiles /IacceptExchangeServerLicenseTerm

5. Post-Installation Tasks:

1) Creating accepted domains

New-AcceptedDomain –Name aplusnb -DomainName aplusnb.com -DomainType Authoritative

2) Creating an email address policy

New-EmailAddressPolicy –Name aplusnb -IncludedRecipients AllRecipients -EnabledEmailAddressTemplates "SMTP:@aplusnb.com"

Update-EmailAddressPolicy -Identity aplusnb

3)Configuring connectors

1. Send Connector:

New-SendConnector -Name "To Internet Send Connector" -Internet -AddressSpaces "*" -DNSRoutingEnabled:$TRUE -SourceTransportServers "NIP-Exch25"

4) Configuring SSL certificates

$Data = New-ExchangeCertificate -FriendlyName "aplusnb SSL Certificate" -GenerateRequest -SubjectName "c=CN, o=aplusnb, cn=mail.aplusnb.com" -DomainName mail.aplusnb.com,autodiscover.aplusnb.com,ca.aplusnb.com,aplusnb.com,mail.nipc.com.cn,autodiscover.nipc.com.cn,nip-exch25.nipc.com.cn,nip-exch08.nipc.com.cn,localhost,nip-exch65.nipc.com.cn,mx1.nipc.com.cn,exchange.nipc.com.cn,mail.nip.com.cn,mx1.nip.com.cn,autodiscover.nip.com.cn,exchange.nip.com.cn,nip-exch08.nipc.bid,nip-exch25.nipc.bid,nip-exch65.nipc.bid,mail.nipc.bid,nipc.bid,autodiscover.nipc.bid  -PrivateKeyExportable $true

Set-Content -path "\\NIP-Exch25\C$\SSLCertRequest.req" -Value $Data

You can use the contents of the SSLCertRequest.req file to request an SSL certificate from a certificate authority (CA),open web: http://NIP-S-CA/Certsrv To Request an SSL Certificate and save to \\NIP-Exch25\C$\Excertnew.cer

Import-ExchangeCertificate –Server NIP-Exch25  -FileData ([Byte[]]$(Get-Content -Path "\\NIP-Exch25\C$\Excertnew.cer" -Encoding byte -ReadCount 0)) | Enable-ExchangeCertificate -Server NIP-Exch25 -Services "IIS,POP,IMAP,SMTP"

5)Configuring Outlook Anywhere

Get-OutlookAnywhere -Server NIP-Exch25 | Set-OutlookAnywhere -ExternalHostname mail.aplusnb.com -ExternalClientsRequireSsl:$true -ExternalClientAuthenticationMethod:Basic -InternalHostName NIP-Exch25.nipc.com.cn  -InternalClientsRequireSsl:$true -InternalClientAuthenticationMethod:Basic

6)Enabling MapiHttp

MapiHttp is the new protocol for Outlook that was introduced in Exchange 2013 SP1. For Outlook, you need to use Outlook 2013 SP1 as well,To enable MapiHttp for Exchange 2013 SP1:

Set-OrganizationConfig -MapiHttpEnabled $true

that it can take up to three hours for the changes to take effect

Enable imap4 and pop3

 

Set-ADServerSettings -PreferredServer "NIP-DC05.nipc.com.cn"

[PS] C:\Windows\system32>Set-ExchangeServer -Identity NIP-Exch08 -StaticGlobalCatalogs "NIP-DC05.nipc.com.cn,NOS-S-DC01.nipc.com.cn"  -StaticDomainControllers  "NIP-DC05.nipc.com.cn,NOS-S-DC01.nipc.com.cn" -StaticConfigDomainController "NIP-D
C05.nipc.com.cn"

 

get-exchangeserver -identity NIP-Exch08 -status | fl current,static

 

混合部署：https://support.office.com/zh-cn/article/%E4%BD%BF%E7%94%A8%E7%94%B1%E4%B8%96%E7%BA%AA%E4%BA%92%E8%81%94%E8%BF%90%E8%90%A5%E7%9A%84-office-365-%E9%85%8D%E7%BD%AE-exchange-%E6%B7%B7%E5%90%88%E9%83%A8%E7%BD%B2%E5%8A%9F%E8%83%BD-26e7cc26-c980-4cc5-a082-c333de544b6d?ui=zh-CN&rs=zh-CN&ad=CN

 

使用由世纪互联运营的 Office 365 配置 Exchange 混合部署功能

 

 

步骤1：为您的 Exchange Online 组织建立受权服务器对象

对于此过程，您必须为您的 Exchange Online 组织指定一个通过验证的域。 此域应与基于云的电子邮件账户使用的主 SMTP 域是同一个域。 此域在如下过程当中称为 <您的通过验证的域>。

在您的本地 Exchange 组织中在 Exchange 命令行管理程序中运行如下命令。

New-AuthServer -Name "MicrosoftAzureACS" -AuthMetadataUrl https://accounts.accesscontrol.chinacloudapi.cn/<your verified-domain>/metadata/json/1

 

New-AuthServer -Name "MicrosoftAzureACS" -AuthMetadataUrl https://accounts.accesscontrol.chinacloudapi.cn/aplusnb.com/metadata/json/1

 

步骤 2：为您的 Exchange Online 组织启用合做伙伴应用程序

在您的本地 Exchange 组织中在 Exchange PowerShell 中运行如下命令。

Get-PartnerApplication | ?{$_.ApplicationIdentifier -eq "00000002-0000-0ff1-ce00-000000000000"-and $_.Realm -eq ""} | Set-PartnerApplication -Enabled $true

 

 

步骤 3：导出本地受权证书

在此步骤中，您必须运行 PowerShell 脚本导出本地受权证书，该证书随后在下一步骤中将导入您的 Exchange Online 组织中。

1. 将如下文本保存到一个 PowerShell 脚本文件中，例如将脚本文件命名为 ExportAuthCert.ps1。

$thumbprint = (get-authconfig).CurrentCertificateThumbprint

if((test-path $env:SYSTEMDRIVE\OAuthConfig) -eq $false)
{
   md $env:SYSTEMDRIVE\OAuthConfig
}

cd $env:SYSTEMDRIVE\OAuthConfig

$oAuthCert = (dir Cert:\LocalMachine\My) | where {$_.Thumbprint -match $thumbprint}

$certType = [System.Security.Cryptography.X509Certificates.X509ContentType]::Cert

$certBytes = $oAuthCert.Export($certType)

$CertFile = "$env:SYSTEMDRIVE\OAuthConfig\OAuthCert.cer"

[System.IO.File]::WriteAllBytes($CertFile, $certBytes)

 

1. 在您的本地 Exchange 组织中在 Exchange PowerShell 中运行在上一步骤中建立的 PowerShell 脚本。例如：

   .\ExportAuthCert.ps1

导出的证书：

 

步骤 4：将本地受权证书上载到 Microsoft Azure Active Directory ACS

 

您必须使用 Windows PowerShell 将在上一步中导出的本地受权证书上载到 Microsoft Azure Active Directory 访问控制服务 (ACS)。为此，必须安装用于 Windows PowerShell cmdlet 的 Microsoft Azure Active Directory (AD) 模块。

安装 Microsoft Azure AD 模块：https://www.microsoft.com/zh-CN/download/details.aspx?id=41950

install the Microsoft Online Services Sign-In Assistant for IT Professionals RTW from the Microsoft Download Center. Then install the Azure Active Directory Module for Windows PowerShell (64-bit version), and click Run to run the installer package.

 

单击用于 Windows PowerShell 的 Microsoft AzureActive Directory 模块的快捷方式，以打开已安装 Microsoft Azure AD cmdlet 的 Windows PowerShell 工做区。此步骤中的全部命令都将经过用于 Microsoft Azure Active Directory 的 Windows PowerShell 控制台运行。

安装用于 Windows PowerShell 的 Microsoft Azure Active Directory 模块，具体步骤以下：

• 打开提高的 Windows PowerShell 命令提示符（以管理员身份运行 Windows PowerShell）。
• 运行 Install-Module MSOnline 命令。
• 若是系统提示安装 NuGet 提供程序，请键入 Y，而后按 Enter 键。
• 若是系统提示从 PSGallery 安装模块，请键入 Y，而后按 Enter 键。

Install-Module MSOnline

Connect-MsolService -AzureEnvironment AzureChinaCloud

 

将如下文本保存到一个 PowerShell 脚本文件中，例如将脚本文件命名为 UploadAuthCert.ps1：

UploadAuthCert.ps1：

Connect-MsolService -AzureEnvironment AzureChinaCloud;
Import-Module msonlineextended;$CertFile = "$env:SYSTEMDRIVE\OAuthConfig\OAuthCert.cer"
$objFSO = New-Object -ComObject Scripting.FileSystemObject;
$CertFile = $objFSO.GetAbsolutePathName($CertFile);
$cer = New-Object System.Security.Cryptography.X509Certificates.X509Certificate
$cer.Import($CertFile);
$binCert = $cer.GetRawCertData();
$credValue = [System.Convert]::ToBase64String($binCert);
$ServiceName = "00000002-0000-0ff1-ce00-000000000000";
$p = Get-MsolServicePrincipal -ServicePrincipalName $ServiceName
New-MsolServicePrincipalCredential -AppPrincipalId $p.AppPrincipalId -Type asymmetric -Usage Verify -Value $credValue