题目连接：php
http://acm.hdu.edu.cn/showproblem.php?pid=1535c++
Problem Description
In the age of television, not many people attend theater performances. Antique Comedians of Malidinesia are aware of this fact. They want to propagate theater and, most of all, Antique Comedies. They have printed invitation cards with all the necessary information and with the programme. A lot of students were hired to distribute these invitations among the people. Each student volunteer has assigned exactly one bus stop and he or she stays there the whole day and gives invitation to people travelling by bus. A special course was taken where students learned how to influence people and what is the difference between influencing and robbery.
The transport system is very special: all lines are unidirectional and connect exactly two stops. Buses leave the originating stop with passangers each half an hour. After reaching the destination stop they return empty to the originating stop, where they wait until the next full half an hour, e.g. X:00 or X:30, where 'X' denotes the hour. The fee for transport between two stops is given by special tables and is payable on the spot. The lines are planned in such a way, that each round trip (i.e. a journey starting and finishing at the same stop) passes through a Central Checkpoint Stop (CCS) where each passenger has to pass a thorough check including body scan.
All the ACM student members leave the CCS each morning. Each volunteer is to move to one predetermined stop to invite passengers. There are as many volunteers as stops. At the end of the day, all students travel back to CCS. You are to write a computer program that helps ACM to minimize the amount of money to pay every day for the transport of their employees.
The transport system is very special: all lines are unidirectional and connect exactly two stops. Buses leave the originating stop with passangers each half an hour. After reaching the destination stop they return empty to the originating stop, where they wait until the next full half an hour, e.g. X:00 or X:30, where 'X' denotes the hour. The fee for transport between two stops is given by special tables and is payable on the spot. The lines are planned in such a way, that each round trip (i.e. a journey starting and finishing at the same stop) passes through a Central Checkpoint Stop (CCS) where each passenger has to pass a thorough check including body scan.
All the ACM student members leave the CCS each morning. Each volunteer is to move to one predetermined stop to invite passengers. There are as many volunteers as stops. At the end of the day, all students travel back to CCS. You are to write a computer program that helps ACM to minimize the amount of money to pay every day for the transport of their employees.
Input
The input consists of N cases. The first line of the input contains only positive integer N. Then follow the cases. Each case begins with a line containing exactly two integers P and Q, 1 <= P,Q <= 1000000. P is the number of stops including CCS and Q the number of bus lines. Then there are Q lines, each describing one bus line. Each of the lines contains exactly three numbers - the originating stop, the destination stop and the price. The CCS is designated by number 1. Prices are positive integers the sum of which is smaller than 1000000000. You can also assume it is always possible to get from any stop to any other stop.
Output
For each case, print one line containing the minimum amount of money to be paid each day by ACM for the travel costs of its volunteers.
Sample Input
2
2 2
1 2 13
2 1 33
4 6
1 2 10
2 1 60
1 3 20
3 4 10
2 4 5
4 1 50
Sample Output
46
210
1 /* 2 问题 3 输入顶点数p和边数q以及q条边 4 计算并输出顶点1到每一个顶点的最短路径花费，再加上每一个顶点到1的最短路径花费 5 6 解题思路 7 求1号顶点到其他顶点的最短路径之和不难，Dijkstra求解单源最短路便可，关键是其他顶点到1号顶点的最短路径之和 8 具体作法是将原图的全部边都反向存储一遍，再跑一边1号顶点到其他顶点的Dijkstra单源最短路就是要求的其他顶点到1号顶 9 点的最短路径之和。 10 另外因为顶点和边不少，因此采用邻接表+优先队列优化的Dijkstra算法。 11 */ 12 #include<bits/stdc++.h>//HDU G++ 13 const int maxn=1e6+7; 14 const int INF=1e9+7; 15 16 using namespace std; 17 18 int u[maxn],v[maxn],w[maxn]; 19 20 struct Edge{ 21 int from,to,dist; 22 }; 23 24 struct HeapNode{ 25 int d,u; 26 bool operator < (const HeapNode& rhs) const {//优先队列，重载<运算符 27 return d >rhs.d; 28 } 29 }; 30 31 struct Dijkstra{ 32 int n,m; 33 vector<Edge> edges; //邻接表 34 vector<int> G[maxn]; //每一个节点出发的边编号（从0开始编号） 35 bool done[maxn]; //是否已经永久编号 36 int d[maxn]; //s到各个点的距离 37 int p[maxn]; //最短路中的上一条边 38 39 void init(int n){ 40 this->n =n; 41 for(int i=0;i<n;i++) G[i].clear();//清空邻接表 42 edges.clear(); //清空边表 43 } 44 45 void AddEdge(int from,int to,int dist){ 46 //若是是无向图须要将每条无向边存储两边，及调用两次AddEdge 47 edges.push_back((Edge){from,to,dist}); 48 m=edges.size(); 49 G[from].push_back(m-1); 50 } 51 52 void dijkstra(int s){//求s到其余点的距离 53 priority_queue<HeapNode> Q; 54 for(int i=0;i<n;i++) d[i]=INF; 55 d[s]=0; 56 57 memset(done,0,sizeof(done)); 58 Q.push((HeapNode){0,s}); 59 60 while(!Q.empty()){ 61 HeapNode x =Q.top(); 62 Q.pop(); 63 64 int u=x.u; 65 if(done[u]) continue; 66 done[u]=true; 67 68 for(int i=0;i<G[u].size();i++){ 69 Edge& e = edges[G[u][i]]; 70 if(d[e.to] > d[u] + e.dist){ 71 d[e.to] = d[u] + e.dist; 72 p[e.to] = G[u][i]; 73 Q.push((HeapNode){d[e.to],e.to}); 74 } 75 } 76 } 77 } 78 }; 79 80 struct Dijkstra solver; 81 82 int main() 83 { 84 int T,n,m; 85 scanf("%d",&T); 86 while(T--){ 87 scanf("%d%d",&n,&m); 88 solver.init(n); 89 for(int i=1;i<=m;i++){ 90 scanf("%d%d%d",&u[i],&v[i],&w[i]); 91 u[i]--;//模板中的顶点从0开始 92 v[i]--; 93 solver.AddEdge(u[i],v[i],w[i]); 94 } 95 solver.dijkstra(0); 96 int ans=0; 97 for(int i=0;i<solver.n;i++) 98 ans += solver.d[i]; 99 100 solver.init(n); 101 for(int i=1;i<=m;i++){ 102 solver.AddEdge(v[i],u[i],w[i]);//清空后反向存储 103 } 104 solver.dijkstra(0); 105 for(int i=0;i<solver.n;i++) 106 ans += solver.d[i]; 107 108 printf("%d\n",ans); 109 } 110 return 0; 111 }