首先把虚拟机配置为桥接模式，而后开启 网络
再你打算修改虚拟机IP以前首先ping下127.0.0.1看看网卡是不是好的（若是127.0.0.1都ping不通的话，那网卡就是坏的了…）less
[root@localhost /]# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.106 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.095 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.097 ms 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.073 ms 64 bytes from 127.0.0.1: icmp_seq=5 ttl=64 time=0.058 ms 64 bytes from 127.0.0.1: icmp_seq=6 ttl=64 time=0.097 ms 64 bytes from 127.0.0.1: icmp_seq=7 ttl=64 time=0.375 ms ^C64 bytes from 127.0.0.1: icmp_seq=8 ttl=64 time=0.733 ms 64 bytes from 127.0.0.1: icmp_seq=9 ttl=64 time=0.095 ms 64 bytes from 127.0.0.1: icmp_seq=10 ttl=64 time=0.102 ms ^C --- 127.0.0.1 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9006ms rtt min/avg/max/mdev = 0.058/0.183/0.733/0.202 ms [root@localhost /]#
在设置静态IP以前能够先看下本身当前开启的网卡：oop
[root@localhost /]# ifconfig
ens32: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.121 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::9474:4a7c:66fd:8d90 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:e5:c1:96 txqueuelen 1000 (Ethernet)
RX packets 4436 bytes 372786 (364.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 871 bytes 147085 (143.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 16 bytes 1320 (1.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 16 bytes 1320 (1.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@localhost /]#
1.设置网卡ens32静态IPpost
[root@localhost /]# cd /etc/sysconfig/network-scripts/ #注意点cd与“/etc”之间的空格 [root@localhost network-scripts]# [root@localhost network-scripts]# ls #查看network-scripts下的全部文件 ifcfg-ens32 ifdown-eth ifdown-isdn ifdown-sit ifup ifup-ib ifup-plip ifup-routes ifup-tunnel network-functions-ipv6 ifcfg-lo ifdown-ib ifdown-post ifdown-Team ifup-aliases ifup-ippp ifup-plusb ifup-sit ifup-wireless ifdown ifdown-ippp ifdown-ppp ifdown-TeamPort ifup-bnep ifup-ipv6 ifup-post ifup-Team init.ipv6-global ifdown-bnep ifdown-ipv6 ifdown-routes ifdown-tunnel ifup-eth ifup-isdn ifup-ppp ifup-TeamPort network-functions [root@localhost network-scripts]# 使用vi进行编辑 [root@localhost network-scripts]# vi ifcfg-ens32 【点击i 进行插入 完成以后Esc 并输入:wq 进行保存】 [root@localhost network-scripts]# vi ifcfg-ens32 TYPE="Ethernet" BOOTPROTO="static" #启用静态IP地址 DEFROUTE="yes" PEERDNS="yes" PEERROUTES="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_PEERDNS="yes" IPV6_PEERROUTES="yes" IPV6_FAILURE_FATAL="no" IPV6_ADDR_GEN_MODE="stable-privacy" NAME="ens32" UUID="17e371b3-5107-4d72-a58f-e8f71396fd68" DEVICE="ens32" ONBOOT="yes" IPADDR=“192.168.0.121” GATEWAY=“192.168.0.1” 修改： BOOTPROTO=“static” #启用静态IP地址 加入个： IPADDR=“192.168.0.121” #设置IP地址 GATEWAY=“192.168.0.1” #设置网关
【注意】设置好后保存！spa
而后重启网络吧：rest
[root@localhost ~]# service network restart #重启网络 Restarting network (via systemctl): [ OK ] [root@localhost ~]# [root@localhost ~]# ping 192.168.0.107 #ping局域网内的IP正常 PING 192.168.0.107 (192.168.0.107) 56(84) bytes of data. 64 bytes from 192.168.0.107: icmp_seq=1 ttl=64 time=0.759 ms 64 bytes from 192.168.0.107: icmp_seq=2 ttl=64 time=1.07 ms 64 bytes from 192.168.0.107: icmp_seq=3 ttl=64 time=0.615 ms ^C --- 192.168.0.107 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2004ms rtt min/avg/max/mdev = 0.615/0.816/1.076/0.195 ms [root@localhost ~]# ping www.baidu.com #ping百度域名仍是不行 ping: www.baidu.com: Name or service not known #出现这个错误
“ping: www.baidu.com: Name or service not known”错误解决办法code
第一步查看ONBOOT：server
[root@localhost ~]# cd /etc/sysconfig/network-scripts/ [root@localhost network-scripts]# ls ifcfg-ens32 ifdown-bnep ifdown-ippp ifdown-post ifdown-sit ifdown-tunnel ifup-bnep ifup-ippp ifup-plip ifup-ppp ifup-Team ifup-wireless network-functions-ipv6 ifcfg-lo ifdown-eth ifdown-ipv6 ifdown-ppp ifdown-Team ifup ifup-eth ifup-ipv6 ifup-plusb ifup-routes ifup-TeamPort init.ipv6-global ifdown ifdown-ib ifdown-isdn ifdown-routes ifdown-TeamPort ifup-aliases ifup-ib ifup-isdn ifup-post ifup-sit ifup-tunnel network-functions [root@localhost network-scripts]# vi ifcfg-ens32 TYPE="Ethernet" BOOTPROTO="static" #启用静态IP地址 DEFROUTE="yes" PEERDNS="yes" PEERROUTES="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_PEERDNS="yes" IPV6_PEERROUTES="yes" IPV6_FAILURE_FATAL="no" IPV6_ADDR_GEN_MODE="stable-privacy" NAME="ens32" UUID="17e371b3-5107-4d72-a58f-e8f71396fd68" DEVICE="ens32" ONBOOT="yes" IPADDR=“192.168.0.121” GATEWAY=“192.168.0.1”
发现ONBOOT=”no”已设置为ONBOOT=”yes”ip
第二步查看：
ping 命令是属于ICMP协议，ping ip地址有效。若直接ping网址（域名），须要配置DNS。编辑添加nameserver以下：虚拟机
vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4
【注意】设置完保存！
再ping [root@localhost /]# ping www.baidu.com PING www.a.shifen.com (61.135.169.121) 56(84) bytes of data. 64 bytes from 61.135.169.121 (61.135.169.121): icmp_seq=1 ttl=55 time=16.9 ms 64 bytes from 61.135.169.121 (61.135.169.121): icmp_seq=2 ttl=55 time=25.6 ms 64 bytes from 61.135.169.121 (61.135.169.121): icmp_seq=3 ttl=55 time=21.6 ms 64 bytes from 61.135.169.121 (61.135.169.121): icmp_seq=4 ttl=55 time=17.2 ms 64 bytes from 61.135.169.121 (61.135.169.121): icmp_seq=5 ttl=55 time=22.0 ms ^C --- www.a.shifen.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4010ms rtt min/avg/max/mdev = 16.901/20.716/25.652/3.277 ms [root@localhost /]# 到这里就解决了！