redis配置文件详解及实现主从同步切换

时间 2019-11-21

标签 redis 配置文件详解实现主从同步切换栏目 Redis 繁體版

原文原文链接

原理：redis复制是怎么进行工做node

若是设置了一个slave，无论是在第一次连接仍是从新连接master的时候，slave会发送一个同步命令而后master开始后台保存，收集全部对修改数据的命令。当后台保存完成，master会将这个数据文件传送到slave，而后保存在磁盘，加载到内存中；master接着发送收集到的全部的修改数据的命令，这比如一个流命令，是redis协议自己来实现的。redis
当master和slave因一些故障宕机时，slaves会自动的重链，若是master收到多个slave的同步请求，master会执行一个后台保存，以确保全部的slaves都是正常的。当master和slave可以维持连接，就会有一个完整的同步进行。数据库

配置redis主从

配置主从同步是很简单的，仅仅在slave的配置文件中增长相似下面这行的内容:vim

slaveof 192.168.1.1 6379bash

你能够更换master的ip地址或地址，或者，你可使用slaveof命令，master就会启动和slave的同步。服务器

设置slave到master的认证async

若是master须要经过密码登录，那就须要配置slave在进行全部同步操做也要使用到密码。在一个运行的实例上尝试，使用 redis-cli :测试

config set masterauth <password>.net

你也能够设置永久的。在配置文件中添加命令行

　　masterauth <password>　　　

redis主从实战

开启主服务器的后台运行,将配置文件中

daemonize no　　=》》　　daemonize yes。

开启从服务器的后台运行，及设置slaveof的IP和端口：

vim redis.conf
port 6379daemonize yes
slaveof 192.168.1.21 6379
masterauth xxxxxxxx

主从切换

中止redis主服务器：

[root@localhost redis]# redis-cli -p 6379 shutdown
[root@localhost redis]# redis-cli -p 6379 
Could not connect to Redis at 127.0.0.1:6379: Connection refused
not connected>

将redis从服务改成主：

#也能够直接在数据库命令行中输入slaveof no one
[root@localhost redis]# redis-cli -p 6379 slaveof NO ONEOK

假如原来的主redis恢复正常啦。要从新切换回去。

1). 将如今的主redis数据进行保存。

[root@localhost redis]# redis-cli

127.0.0.1:6379> save
OK

2).将如今的主redis的dump.rdb文件拷贝到原来的主dump.rdb目录下面

[root@localhost redis]# scp /data/redis/dump.rdb 192.168.1.21:/data/redis/dump.rdb

3).启动原来的主redis

[root@localhost ~]# /usr/local/redis/bin/redis-server /usr/local/redis/redis.conf

4).将原来的从依然切换成从

[root@localhost redis]# redis-cli -p 6379 slaveof 192.168.1.21 6379
OK

这时你依然能够读取刚才从库写入的数据，若是不能读取则切换失败。

在Master和Slave上安装Keepalived　　注意事项：主从的redis都要开启本地备份

$ yum install keepalived

默认安装完成keepalived有默认的配置文件，所以咱们重写覆盖它：

首先，在Master上建立以下配置文件：
$ vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived
global_defs {
router_id redis100
}
vrrp_script chk_redis
{
script "/etc/keepalived/scripts/redis_check.sh 127.0.0.1 6379"
interval 2
timeout 2
fall 3
}
vrrp_instance redis {
state MASTER # master set to SLAVE also
interface eth0
virtual_router_id 50
priority 150
nopreempt # no seize,must add
advert_int 1
authentication { #all node must same
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.200/24
}
track_script {
chk_redis
}
notify_master "/etc/keepalived/scripts/redis_master.sh 127.0.0.1 192.168.0.101 6379"
notify_backup "/etc/keepalived/scripts/redis_backup.sh 127.0.0.1 192.168.0.101 6379"
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh
}

而后，在Slave上建立以下配置文件：

! Configuration File for keepalived

global_defs {
router_id redis101
}
vrrp_script chk_redis
{
script "/etc/keepalived/scripts/redis_check.sh 127.0.0.1 6379"
interval 2
timeout 2
fall 3
}
vrrp_instance redis {
state BACKUP
interface eth0
virtual_router_id 50
priority 100
advert_int 1
authentication { #all node must same
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.200/24
}
track_script {
chk_redis
}
notify_master "/etc/keepalived/scripts/redis_master.sh 127.0.0.1 192.168.0.100 6379"
notify_backup "/etc/keepalived/scripts/redis_backup.sh 127.0.0.1 192.168.0.100 6379"
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh
}

在Master和Slave上建立监控Redis的脚本
$ mkdir /etc/keepalived/scripts
$ vim /etc/keepalived/scripts/redis_check.sh

#!/bin/bash
ALIVE=`/usr/redis/redis-cli -h $1 -p $2 PING`
LOGFILE="/var/log/keepalived-redis-check.log"
echo "[CHECK]" >> $LOGFILE
date >> $LOGFILE
if [ $ALIVE == "PONG" ]; then :
echo "Success: redis-cli -h $1 -p $2 PING $ALIVE" >> $LOGFILE 2>&1
exit 0
else
echo "Failed:redis-cli -h $1 -p $2 PING $ALIVE " >> $LOGFILE 2>&1
exit 1
fi

编写如下负责运做的关键脚本：
notify_master /etc/keepalived/scripts/redis_master.sh
notify_backup /etc/keepalived/scripts/redis_backup.sh
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh

由于Keepalived在转换状态时会依照状态来呼叫：
当进入Master状态时会呼叫notify_master
当进入Backup状态时会呼叫notify_backup
当发现异常状况时进入Fault状态呼叫notify_fault
当Keepalived程序终止时则呼叫notify_stop

首先，在Redis Master上建立notity_master与notify_backup脚本：
$ vim /etc/keepalived/scripts/redis_master.sh

#!/bin/bash
REDISCLI="/usr/redis/redis-cli -h $1 -p $3"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
echo "Run MASTER cmd ..." >> $LOGFILE 2>&1
$REDISCLI SLAVEOF $2 $3 >> $LOGFILE
sleep 10 #delay 10 s wait data async cancel sync
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash
REDISCLI="/usr/redis/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF $2 $3 >> $LOGFILE 2>&1
# echo "Being slave...." >> $LOGFILE 2>&1
sleep 15 #delay 15 s wait data sync exchange role

接着，在Redis Slave上建立notity_master与notify_backup脚本：

$ vim /etc/keepalived/scripts/redis_master.sh

#!/bin/bash
REDISCLI="/usr/redis/redis-cli -h $1 -p $3"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
echo "Run SLAVEOF cmd ... " >> $LOGFILE
$REDISCLI SLAVEOF $2 $3 >> $LOGFILE 2>&1
#echo "SLAVEOF $2 cmd can't excute ... " >> $LOGFILE
sleep 10 ##delay 15 s wait data sync exchange role
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash
REDISCLI="/usr/redis/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[BACKUP]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1
echo "Run SLAVEOF cmd ..." >> $LOGFILE 2>&1
$REDISCLI SLAVEOF $2 $3 >> $LOGFILE
sleep 100 #delay 10 s wait data async cancel sync
exit(0)

而后在Master与Slave建立以下相同的脚本：
$ vim /etc/keepalived/scripts/redis_fault.sh

#!/bin/bash
LOGFILE=/var/log/keepalived-redis-state.log
echo "[fault]" >> $LOGFILE
date >> $LOGFILE

$ sudo vim /etc/keepalived/scripts/redis_stop.sh

#!/bin/bash
LOGFILE=/var/log/keepalived-redis-state.log
echo "[stop]" >> $LOGFILE
date >> $LOGFILE

给脚本都加上可执行权限：

（这点很重要,最开始因为这不没作，运行后一直报错 "VRRP_Instance(Redis) Now in FAULT state"）

$ sudo chmod +x /etc/keepalived/scripts/*.sh

脚本建立完成之后，咱们开始按照以下流程进行测试：1.启动Master上的Redis$ /etc/init.d/redis start2.启动Slave上的Redis$ /etc/init.d/redis start3.启动Master上的Keepalived$ /etc/init.d/keepalived start4.启动Slave上的Keepalived$ /etc/init.d/keepalived start5.尝试经过VIP链接Redis:$ redis-cli -h 10.6.1.200 INFO链接成功，Slave也链接上来了。role:masterslave0:10.6.1.144,6379,online6.尝试插入一些数据：$ redis-cli -h 10.6.1.200 SET Hello RedisOK从VIP读取数据$ redis-cli -h 10.6.1.200 GET Hello"Redis"从Master读取数据$ redis-cli -h 10.6.1.143 GET Hello"Redis"从Slave读取数据$ redis-cli -h 10.6.1.144 GET Hello"Redis"下面，模拟故障产生：将Master上的Redis停了$ service redis_6379 stop查看Master上的Keepalived日志$ tailf /var/log/keepalived-redis-state.log[fault]Thu Sep 27 08:29:01 CST 2012同时Slave上的日志显示：$ tailf /var/log/keepalived-redis-state.log[master]Fri Sep 28 14:14:09 CST 2012Being master....Run SLAVEOF cmd ...OKRun SLAVEOF NO ONE cmd ...OK而后咱们能够发现，Slave已经接管服务，而且担任Master的角色了。$ redis-cli -h 192.168.0.200 INFOrole:master而后咱们恢复Master的Redis进程$ service redis_6379 start查看Master上的Keepalived日志$ tailf /var/log/keepalived-redis-state.log[master]Thu Sep 27 08:31:33 CST 2012Being master....Run SLAVEOF cmd ...OKRun SLAVEOF NO ONE cmd ...OK同时Slave上的日志显示：$ tailf /var/log/keepalived-redis-state.log[backup]Fri Sep 28 14:16:37 CST 2012Being slave....Run SLAVEOF cmd ...OK能够发现目前的Master已经再次恢复了Master的角色，故障切换以及自动恢复都成功了。

redis配置文件详解及实现主从同步切换

配置redis主从

redis主从实战

主从切换

在Master和Slave上安装Keepalived 注意事项：主从的redis都要开启本地备份

在Master和Slave上安装Keepalived　　注意事项：主从的redis都要开启本地备份