基于Docker部署ETCD集群

 

基于Docker部署ETCD集群

关于ETCD要不要使用TLS？

首先TLS的目的是为了鉴权为了防止别人任意的链接上你的etcd集群。其实意思就是说若是你要放到公网上的ETCD集群，并开放端口，我建议你必定要用TLS。
若是你的ETCD集群跑在一个内网环境好比（VPC环境），并且你也不会开放ETCD端口，你的ETCD跑在防火墙以后，一个安全的局域网中，那么你用不用TLS，都行。

优化参数

• --auto-compaction-retention
  • 因为ETCD数据存储多版本数据，随着写入的主键增长历史版本须要定时清理，默认的历史数据是不会清理的，数据达到2G就不能写入，必需要清理压缩历史数据才能继续写入;因此根据业务需求，在上生产环境以前就提早肯定，历史数据多长时间压缩一次;推荐一小时压缩一次数据这样能够极大的保证集群稳定，减小内存和磁盘占用
• --max-request-bytes
  • etcd Raft消息最大字节数，ETCD默认该值为1.5M; 可是不少业务场景发现同步数据的时候1.5M彻底无法知足要求，因此提早肯定初始值很重要;因为1.5M致使咱们线上的业务没法写入元数据的问题，咱们紧急升级以后把该值修改成默认32M，可是官方推荐的是10M，你们能够根据业务状况本身调整
• --quota-backend-bytes
  • ETCD db数据大小，默认是2G，当数据达到2G的时候就不容许写入，必须对历史数据进行压缩才能继续写入;参加1里面说的，咱们启动的时候就应该提早肯定大小，官方推荐是8G，这里咱们也使用8G的配置

Docker安装ETCD

请依次在你规划好的etcd机器上运行便可

etcd-s1

mkdir -p /var/etcd docker rm etcd1 -f rm -rf /var/etcd docker run --restart=always --net host -it --name etcd1 -d \ -v /var/etcd:/var/etcd \ -v /etc/localtime:/etc/localtime \ registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.2.24 \ etcd --name etcd-s1 \ --auto-compaction-retention=1 --max-request-bytes=33554432 --quota-backend-bytes=8589934592 \ --data-dir=/var/etcd/etcd-data \ --listen-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://192.168.150.141:2380 \
--advertise-client-urls http://192.168.150.141:2379,http://192.168.150.141:2380 \
-initial-cluster-token etcd-cluster \ -initial-cluster "etcd-s1=http://192.168.150.141:2380,etcd-s2=http://192.168.150.142:2380,etcd-s3=http://192.168.150.143:2380" \ 
-initial-cluster-state new

etcd-s2

mkdir -p /var/etcd docker rm etcd2 -f rm -rf /var/etcd docker run --restart=always --net host -it --name etcd2 -d \ -v /var/etcd:/var/etcd \ -v /etc/localtime:/etc/localtime \ registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.2.24 \ etcd --name etcd-s2 \ --auto-compaction-retention=1 --max-request-bytes=33554432 --quota-backend-bytes=8589934592 \ --data-dir=/var/etcd/etcd-data \ --listen-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://192.168.150.142:2380 \
--advertise-client-urls http://192.168.150.142:2379,http://192.168.150.142:2380 \
-initial-cluster-token etcd-cluster \ -initial-cluster "etcd-s1=http://192.168.150.141:2380,etcd-s2=http://192.168.150.142:2380,etcd-s3=http://192.168.150.143:2380" \ -initial-cluster-state new

etcd-s3

mkdir -p /var/etcd docker rm etcd3 -f rm -rf /var/etcd docker run --restart=always --net host -it --name etcd3 -d \ -v /var/etcd:/var/etcd \ -v /etc/localtime:/etc/localtime \ registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.2.24 \ etcd --name etcd-s3 \ --auto-compaction-retention=1 --max-request-bytes=33554432 --quota-backend-bytes=8589934592 \ --data-dir=/var/etcd/etcd-data \ --listen-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://192.168.150.143:2380 \
--advertise-client-urls http://192.168.150.143:2379,http://192.168.150.143:2380 \
-initial-cluster-token etcd-cluster \ -initial-cluster "etcd-s1=http://192.168.150.141:2380,etcd-s2=http://192.168.150.142:2380,etcd-s3=http://192.168.150.143:2380" \ -initial-cluster-state new

验证

➜ ETCDCTL_API=3 etcdctl member list 410feb26f4fa3c7f: name=etcd-s1 peerURLs=http://192.168.150.141:2380 clientURLs=http://192.168.150.141:2379,http://192.168.150.141:2380
56fa117fc503543c: name=etcd-s3 peerURLs=http://192.168.150.143:2380 clientURLs=http://192.168.150.143:2379,http://192.168.150.143:2380
bc4d900274366497: name=etcd-s2 peerURLs=http://192.168.150.142:2380 clientURLs=http://192.168.150.142:2379,http://192.168.150.142:2380
 ➜ ETCDCTL_API=3 etcdctl cluster-health member 410feb26f4fa3c7f is healthy: got healthy result from http://192.168.150.141:2379
member 56fa117fc503543c is healthy: got healthy result from http://192.168.150.143:2379
member bc4d900274366497 is healthy: got healthy result from http://192.168.150.142:2379
cluster is healthy

到此ETCD集群部署完毕。