*Feb 4 12:07:50.100: RP: Currently running ROMMON from S (Gold) region
*Feb 4 20:07:55: %SYS-6-CLOCKUPDATE: System clock has been updated from 12:07:55 UTC Mon Feb 4 2013 to 20:07:55 BJ Mon Feb 4 2013, configured from console by console.
*Feb 4 20:07:55: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Feb 4 20:08:01: %SYS-5-CONFIG_I: Configured from memory by console
*Feb 4 20:08:05: %SYS-5-RESTART: System restarted --
*Feb 4 12:17:33.588: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Feb 4 12:07:46.324: SP: SP: Currently running ROMMON from S (Gold) region
*Feb 4 12:07:53.064: %C6K_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default factory setting for config register is 0x2102.It is advisable to retain 1 in 0x2102 as it prevents returning to ROMMON when break is issued.
*Feb 4 12:07:55.933: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Feb 4 12:08:04.712: %SYS-SP-5-RESTART: System restarted --
*Feb 4 12:08:05: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Feb 4 12:08:05: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Feb 4 12:08:05: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Feb 4 12:08:05: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
*Feb 4 12:08:05: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
*Feb 4 20:08:07: %SNMP-5-COLDSTART: SNMP agent on host YQ-B716-C6509-C-A is undergoing a cold start
*Feb 4 12:08:08: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in effect
*Feb 4 20:08:12: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Feb 4 20:08:14: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
*Feb 4 20:08:24: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics
*Feb 4 20:08:26: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online
*Feb 4 20:08:35: %DIAG-SP-6-RUN_MINIMUM: Module 7: Running Minimal Diagnostics...
*Feb 4 20:08:35: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...
*Feb 4 20:08:35: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics...
*Feb 4 20:08:43: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE: Replication Mode Change Detected. Current system replication mode is Ingress
*Feb 4 20:08:43: %DIAG-SP-6-DIAG_OK: Module 7: Passed Online Diagnostics
*Feb 4 20:08:48: %OIR-SP-6-INSCARD: Card inserted in slot 7, interfaces are now online
*Feb 4 20:08:56: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
*Feb 4 20:09:02: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online
*Feb 4 20:09:03: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics
*Feb 4 20:09:09: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are now online
*Feb 4 20:09:29: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.244 on GigabitEthernet7/6 from LOADING to FULL, Loading Done
*Feb 4 20:09:29: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.243 on GigabitEthernet7/5 from LOADING to FULL, Loading Done
*Feb 4 20:09:36: %BGP-5-ADJCHANGE: neighbor 110.79.134.232 Up
*Feb 4 20:09:38: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.242 on GigabitEthernet7/11 from LOADING to FULL, Loading Done
*Feb 4 20:09:38: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 110.186.35.237 Port 514 started - CLI initiated
Feb 4 12:09:39.124: %SYS-CFC4-5-RESTART: System restarted --
*Feb 4 20:09:40: %TRACKING-5-STATE: 1 ip sla 1 reachability Down->Up
Feb 4 12:09:39.148: CFC4: Currently running ROMMON from S (Gold) region
*Feb 4 20:09:46: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimal Diagnostics...
*Feb 4 20:09:56: %MLS_RATE-4-DISABLING: The global switching mode is now 'truncated'. Disabling the Layer2 Rate Limiters.
*Feb 4 20:09:55: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
*Feb 4 20:10:00: %TRACKING-5-STATE: 10 ip sla 10 state Down->Up
*Feb 4 20:10:02: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.244 on GigabitEthernet1/6 from LOADING to FULL, Loading Done
*Feb 4 20:10:02: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.93.245 on Vlan143 from LOADING to FULL, Loading Done
*Feb 4 20:10:03: %PARSER-5-CFGLOG_LOGGEDCMD: User:cds-eem logged command:interface Vlan951
*Feb 4 20:10:04: %PARSER-5-CFGLOG_LOGGEDCMD: User:cds-eem logged command:no shutdown
*Feb 4 20:10:05: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now online
*Feb 4 20:10:09: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.232 on Vlan133 from LOADING to FULL, Loading Done
*Feb 4 20:10:22: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.242 on GigabitEthernet1/4 from LOADING to FULL, Loading Done
*Feb 4 20:10:22: %BGP-5-ADJCHANGE: neighbor 110.79.134.224 Up
*Feb 4 20:10:25: %BGP-5-ADJCHANGE: neighbor 110.79.134.225 Up
*Feb 4 20:11:23: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.232 on Vlan141 from LOADING to FULL, Loading Done
*Feb 4 20:11:24: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 110.79.82.213 Port 514 started - CLI initiated
*Feb 4 20:11:24: %OSPF-5-ADJCHG: Process 100, Nbr 110.79.134.246 on Vlan182 from LOADING to FULL, Loading Done
*Feb 4 20:11:24: %OSPF-5-ADJCHG: Process 100, Nbr 22.181.70.190 on Vlan135 from LOADING to FULL, Loading Done
*Feb 4 20:12:17: %BGP-5-ADJCHANGE: neighbor 22.112.60.77 Up