开发环境:WAMP
实例一,Apache配置localhost虚拟主机步骤
1,用记事本打开apache目录下httpd文件(如:D:\wamp\bin\apache\apache2.2.8\conf),找到以下模块
#Virtualhosts
#Includeconf/extra/httpd-vhosts.conf
去掉前面的#,这样就开启了httpd-vhosts虚拟主机文件。这时候重启wamp环境,没法打开localhost,须要在httpd-vhosts.conf配置一下。
2,用记事本打开httpd-vhosts文件,配置好localhost虚拟主机,参照httpd-vhosts文件中实例,修改为以下:
<VirtualHost*:80>
ServerAdminwebmaster@dummy-host.localhost
DocumentRoot”D:\wamp\www”
ServerNamelocalhost
ServerAliaslocalhost
ErrorLog”logs/dummy-host.localhost-error.log”
CustomLog”logs/dummy-host.localhost-access.log”common
</VirtualHost>
修改配置以下:
DocumentRoot修改成本地wamp环境下的www目录(如:D:\wamp\www)
ServerName改成localhost
3,重启Apache,发现localhost能够正常打开,配置localhost比较简单。
实例二,Apache配置test.biuuu.com虚拟主机步骤
1,方法同上,复制配置代码修改以下:
<VirtualHost*:80>
ServerAdmintest@biuuu.com
DocumentRootE:\WebRoot\biuuu
ServerNametest.biuuu.com
ErrorLog”logs/dummy-host2.localhost-error.log”
CustomLog”logs/dummy-host2.localhost-access.log”common
</VirtualHost>
2,打开host文件(C:\WINDOWS\system32\drivers\etc\hosts),增长一行代码
127.0.0.1test.biuuu.com
3,在浏览器中打开test.biuuu.com,发现以下错误403Forbidden错误
Forbidden
Youdon’thavepermissiontoaccess/onthisserver.
分析:这主要是目录访问权限没有设置,须要设置对目录的访问权!
4,打开httpd文件,找到以下语句
<Directory/>
OptionsFollowSymLinks
AllowOverrideNone
Orderdeny,allow
Denyfromall
</Directory>
复制以上代码,并进行目录修改,把/替换为E:\WebRoot\biuuu,修改virtualHost代码以下
<VirtualHost*:80>
ServerAdmintest@biuuu.com
DocumentRootE:\WebRoot\biuuu
ServerNametest.biuuu.com
ErrorLog”logs/dummy-host2.localhost-error.log”
CustomLog”logs/dummy-host2.localhost-access.log”common
<DirectoryE:\WebRoot\biuuu>
OptionsFollowSymLinks
AllowOverrideNone
Orderdeny,allow
Denyfromall
</Directory>
</VirtualHost>
在浏览器中测试发现仍是打不开,提示如上403Forbidden错误,修改其中的Denyfromall为allowfromall
5,重启Apache,虚拟主机配置成功!
注意事项
1,目录路径,如E:\WebRoot\biuuu
2,访问权限,如上Denyfromall修改成allowfromall
3,host文件,配置虚拟域名host指向
4,httpd文件,打开Includeconf/extra/httpd-vhosts.conf模块
5,httpd-vhosts文件,配置虚拟主机
使用Apache配置httpd-vhosts虚拟主机对于开发人员来讲比较简单,但却很是重要,仅供参考!web