搭建高可用的redis集群，避免standalone模式带给你的苦难

时间 2019-11-12

标签搭建可用 redis 集群避免 standalone 模式带给苦难栏目 Redis 繁體版

原文原文链接

　　如今项目上用redis的话，不多说不用集群的状况，毕竟若是生产上只有一台redis会有极大的风险，好比机器挂掉，或者内存爆掉，就好比咱们生产环境node

曾今也遭遇到这种状况，致使redis内存不够挂掉的状况，固然这些都是咱们及其不能容忍的，第一个必需要作到高可靠，其次才是高性能，好了，下面我来redis

逐一搭建一下。centos

一：Redis集群搭建ruby

1. 下载bash

首先去官网下载较新的3.2.0版本，下载方式仍是很是简单的，好比官网介绍的这样。app

$ wget http://download.redis.io/releases/redis-3.2.0.tar.gz
$ tar xzf redis-3.2.0.tar.gz
$ cd redis-3.2.0
$ make

2. redis配置socket

　因为咱们要作集群，并且还要redis自带的redis-trib.rb 能正常运行，咱们须要在集群中开启三台master，三台slave，因此这里我须要创建6个文件性能

夹，并且文件夹的名称就使用端口地址的名字，好比：6389. 6380....6384。ui

3. config配置。this

如今directory的分布状况大体如上图，接下来要作的事情就是配置redis.conf了，在这里须要配置四个选项。。。

<1> port 端口地址，好比6380文件夹下面的port就是6380，

# Accept connections on the specified port, default is 6379 (IANA #815344).
# If port 0 is specified Redis will not listen on a TCP socket.
port 6379

<2> cluster-enabled 和 cluster-config-file

这个顾名思义，首先须要开启redis的cluster模式，而后配置一个cluster-config-file文件，这个文件用于存放redis的实时信息，redis会动态追加和修

改这个conf下面的内容信息，不过要记住，这个nodes-6379.conf 能够根据端口文件夹依次配置，好比6380文件夹能够改为nodes-6380.conf这样。。。

# Normal Redis instances can't be part of a Redis Cluster; only nodes that are
# started as cluster nodes can. In order to start a Redis instance as a
# cluster node enable the cluster support uncommenting the following:
#
cluster-enabled yes

# Every cluster node has a cluster configuration file. This file is not
# intended to be edited by hand. It is created and updated by Redis nodes.
# Every Redis Cluster node requires a different cluster configuration file.
# Make sure that instances running in the same system do not have
# overlapping cluster configuration file names.
#
cluster-config-file nodes-6379.conf

<3> directory

为了方便管理，我这里配置的root目录取决于在哪一个文件夹，好比6380下面个人dir就是: dir ./6380/

# Note that you must specify a directory here, not a file name.
dir ./6379/

<4> protected-mode

这个是redis 3.2 才追加的一个功能，从功能注释中，咱们就能够发现，这个默认就是不让外界能够访问redis，因此这里咱们就改成no，能够远程访问。

# By default protected mode is enabled. You should disable it only if
# you are sure you want clients from other hosts to connect to Redis
# even if no authentication is configured, nor a specific set of interfaces
# are explicitly listed using the "bind" directive.
protected-mode no

ok，到如今为止，咱们的config就修改完毕了，其余端口的文件夹也能够依次配置之~

二：开启redis

到如今为止，各个端口文件夹都配置成功了，接下来准备开启了，真的好么么哒~~~，窗口太多，有点萌萌的。

接下来咱们能够看一下，在6379下面是否是有生成node-6379.conf文件，好比下面：

三：配置redis-trib.rb

由于redis-trib.rb是ruby写的，而咱们的电脑确定是没有ruby和一些配置依赖项，不过不要紧，有强大的yum安装，一切都不是问题。

1. 执行replicas命令

[jack@localhost ~]$ cluster/redis-trib.rb  create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384
/usr/bin/env: ruby: No such file or directory
[jack@localhost ~]$

能够看到ruby是没有安装的，因此下一步咱们要安装ruby了。。。

2. 安装ruby 【必定要是管理员权限哦】

[jack@localhost ~]$ sudo
usage: sudo [-D level] -h | -K | -k | -V
usage: sudo -v [-AknS] [-D level] [-g groupname|#gid] [-p prompt] [-u user
            name|#uid]
usage: sudo -l[l] [-AknS] [-D level] [-g groupname|#gid] [-p prompt] [-U user
            name] [-u user name|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-r role] [-t type] [-C fd] [-D level] [-g
            groupname|#gid] [-p prompt] [-u user name|#uid] [-g groupname|#gid]
            [VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-r role] [-t type] [-C fd] [-D level] [-g
            groupname|#gid] [-p prompt] [-u user name|#uid] file ...
[jack@localhost ~]$ su
Password: 
jacsu: incorrect password
[jack@localhost ~]$ yum install ruby
Loaded plugins: fastestmirror, refresh-packagekit, security
You need to be root to perform this command.
[jack@localhost ~]$ jack
bash: jack: command not found
[jack@localhost ~]$ su
Password: 
[root@localhost jack]# yum install ruby
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
 * base: mirror.bit.edu.cn
 * extras: mirror.bit.edu.cn
 * updates: mirror.bit.edu.cn
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package ruby.x86_64 0:1.8.7.374-4.el6_6 will be installed
--> Processing Dependency: ruby-libs = 1.8.7.374-4.el6_6 for package: ruby-1.8.7.374-4.el6_6.x86_64
--> Processing Dependency: libruby.so.1.8()(64bit) for package: ruby-1.8.7.374-4.el6_6.x86_64
--> Running transaction check
---> Package ruby-libs.x86_64 0:1.8.7.374-4.el6_6 will be installed
--> Processing Dependency: libreadline.so.5()(64bit) for package: ruby-libs-1.8.7.374-4.el6_6.x86_64
--> Running transaction check
---> Package compat-readline5.x86_64 0:5.2-17.1.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package                Arch         Version                   Repository  Size
================================================================================
Installing:
 ruby                   x86_64       1.8.7.374-4.el6_6         base       538 k
Installing for dependencies:
 compat-readline5       x86_64       5.2-17.1.el6              base       130 k
 ruby-libs              x86_64       1.8.7.374-4.el6_6         base       1.7 M

Transaction Summary
================================================================================
Install       3 Package(s)

Total download size: 2.3 M
Installed size: 7.8 M
Is this ok [y/N]: y
Downloading Packages:
(1/3): compat-readline5-5.2-17.1.el6.x86_64.rpm          | 130 kB     00:00     
(2/3): ruby-1.8.7.374-4.el6_6.x86_64.rpm                 | 538 kB     00:00     
(3/3): ruby-libs-1.8.7.374-4.el6_6.x86_64.rpm            | 1.7 MB     00:02     
--------------------------------------------------------------------------------
Total                                           747 kB/s | 2.3 MB     00:03     
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
Importing GPG key 0xC105B9DE:
 Userid : CentOS-6 Key (CentOS 6 Official Signing Key) <centos-6-key@centos.org>
 Package: centos-release-6-5.el6.centos.11.1.x86_64 (@anaconda-CentOS-201311272149.x86_64/6.5)
 From   : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : compat-readline5-5.2-17.1.el6.x86_64                         1/3 
  Installing : ruby-libs-1.8.7.374-4.el6_6.x86_64                           2/3 
  Installing : ruby-1.8.7.374-4.el6_6.x86_64                                3/3 
  Verifying  : compat-readline5-5.2-17.1.el6.x86_64                         1/3 
  Verifying  : ruby-libs-1.8.7.374-4.el6_6.x86_64                           2/3 
  Verifying  : ruby-1.8.7.374-4.el6_6.x86_64                                3/3 

Installed:
  ruby.x86_64 0:1.8.7.374-4.el6_6                                               

Dependency Installed:
  compat-readline5.x86_64 0:5.2-17.1.el6  ruby-libs.x86_64 0:1.8.7.374-4.el6_6 

Complete!
[root@localhost jack]#

3. 安装rubygems

接着咱们再次运行 replicas命令，看看会怎么样。。。

[root@localhost jack]# cluster/redis-trib.rb  create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384
cluster/redis-trib.rb:24:in `require': no such file to load -- rubygems (LoadError)
    from cluster/redis-trib.rb:24
[root@localhost jack]#

结果苦逼了，仍是报错，看提示貌似是少了一个rubygems，此次咱们仍是经过yum安装。

[root@localhost jack]# yum install -y rubygems
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
 * base: mirror.bit.edu.cn
 * extras: mirror.bit.edu.cn
 * updates: mirror.bit.edu.cn
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package rubygems.noarch 0:1.3.7-5.el6 will be installed
--> Processing Dependency: ruby-rdoc for package: rubygems-1.3.7-5.el6.noarch
--> Running transaction check
---> Package ruby-rdoc.x86_64 0:1.8.7.374-4.el6_6 will be installed
--> Processing Dependency: ruby-irb = 1.8.7.374-4.el6_6 for package: ruby-rdoc-1.8.7.374-4.el6_6.x86_64
--> Running transaction check
---> Package ruby-irb.x86_64 0:1.8.7.374-4.el6_6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package           Arch           Version                    Repository    Size
================================================================================
Installing:
 rubygems          noarch         1.3.7-5.el6                base         207 k
Installing for dependencies:
 ruby-irb          x86_64         1.8.7.374-4.el6_6          base         317 k
 ruby-rdoc         x86_64         1.8.7.374-4.el6_6          base         381 k

Transaction Summary
================================================================================
Install       3 Package(s)

Total download size: 905 k
Installed size: 3.0 M
Downloading Packages:
(1/3): ruby-irb-1.8.7.374-4.el6_6.x86_64.rpm             | 317 kB     00:00     
(2/3): ruby-rdoc-1.8.7.374-4.el6_6.x86_64.rpm            | 381 kB     00:00     
(3/3): rubygems-1.3.7-5.el6.noarch.rpm                   | 207 kB     00:00     
--------------------------------------------------------------------------------
Total                                           625 kB/s | 905 kB     00:01     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : ruby-irb-1.8.7.374-4.el6_6.x86_64                            1/3 
  Installing : ruby-rdoc-1.8.7.374-4.el6_6.x86_64                           2/3 
  Installing : rubygems-1.3.7-5.el6.noarch                                  3/3 
  Verifying  : ruby-rdoc-1.8.7.374-4.el6_6.x86_64                           1/3 
  Verifying  : ruby-irb-1.8.7.374-4.el6_6.x86_64                            2/3 
  Verifying  : rubygems-1.3.7-5.el6.noarch                                  3/3 

Installed:
  rubygems.noarch 0:1.3.7-5.el6                                                 

Dependency Installed:
  ruby-irb.x86_64 0:1.8.7.374-4.el6_6    ruby-rdoc.x86_64 0:1.8.7.374-4.el6_6   

Complete!
[root@localhost jack]#

4. 安装redis驱动

仍是继续不死心，咱们继续运行replicas命令命令。

[root@localhost jack]# cluster/redis-trib.rb  create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384
/usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- redis (LoadError)
    from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require'
    from cluster/redis-trib.rb:25
[root@localhost jack]#

卧槽，仍是有问题，此次貌似是一个gem_original_require没有安装，固然这个通常是说ruby版本太老了，因此如今亲要么升级ruby版本，要么直接安装

ruby的redis驱动。

[root@localhost jack]# gem install redis
Successfully installed redis-3.3.0
1 gem installed
Installing ri documentation for redis-3.3.0...
Installing RDoc documentation for redis-3.3.0...

6. 运行replicas命令

终于貌似全部的依赖咱们都解决了，接下来就能够真的执行了，真是一把辛酸泪啊。。。操。。。

[root@localhost jack]# cluster/redis-trib.rb  create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384
>>> Creating cluster
>>> Performing hash slots allocation on 6 nodes...
Using 3 masters:
192.168.161.133:6379
192.168.161.133:6380
192.168.161.133:6381
Adding replica 192.168.161.133:6382 to 192.168.161.133:6379
Adding replica 192.168.161.133:6383 to 192.168.161.133:6380
Adding replica 192.168.161.133:6384 to 192.168.161.133:6381
M: fdae457e803e2e04a7c549c69b44a2beefdae3bc 192.168.161.133:6379
   slots:0-5460 (5461 slots) master
M: 74285cee0fa65e64b443ecc630e447a8a65ee9f8 192.168.161.133:6380
   slots:5461-10922 (5462 slots) master
M: 14ed067a1b85044325d5800fa8479a6b4e41a10c 192.168.161.133:6381
   slots:10923-16383 (5461 slots) master
S: c50b1ff1fe3a00b16703f3b5705d2dafe046240b 192.168.161.133:6382
   replicates fdae457e803e2e04a7c549c69b44a2beefdae3bc
S: 8f7bd92f7ffb48e327820693a5820b5be7ea5556 192.168.161.133:6383
   replicates 74285cee0fa65e64b443ecc630e447a8a65ee9f8
S: 4a85ed078b4c99afad7f3a9a8df09082c681a649 192.168.161.133:6384
   replicates 14ed067a1b85044325d5800fa8479a6b4e41a10c
Can I set the above configuration? (type 'yes' to accept): yes
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join....
>>> Performing Cluster Check (using node 192.168.161.133:6379)
M: fdae457e803e2e04a7c549c69b44a2beefdae3bc 192.168.161.133:6379
   slots:0-5460 (5461 slots) master
M: 74285cee0fa65e64b443ecc630e447a8a65ee9f8 192.168.161.133:6380
   slots:5461-10922 (5462 slots) master
M: 14ed067a1b85044325d5800fa8479a6b4e41a10c 192.168.161.133:6381
   slots:10923-16383 (5461 slots) master
M: c50b1ff1fe3a00b16703f3b5705d2dafe046240b 192.168.161.133:6382
   slots: (0 slots) master
   replicates fdae457e803e2e04a7c549c69b44a2beefdae3bc
M: 8f7bd92f7ffb48e327820693a5820b5be7ea5556 192.168.161.133:6383
   slots: (0 slots) master
   replicates 74285cee0fa65e64b443ecc630e447a8a65ee9f8
M: 4a85ed078b4c99afad7f3a9a8df09082c681a649 192.168.161.133:6384
   slots: (0 slots) master
   replicates 14ed067a1b85044325d5800fa8479a6b4e41a10c
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.
[root@localhost jack]#

从上面能够看到，trib程序告知咱们是否用 6379，6380，6381 做为主， 6382，6383，6384做为从。。而后我就恩准了。。就这样咱们的集群

就建立好了，好了，这篇就讲到这里，也不是特别复杂吧~~~