H3C 链路聚合

时间 2020-01-25

标签 h3c 链路聚合栏目 C&C++ 繁體版

原文原文链接

二层聚合：ide

1、静态聚合spa

[SW]int Bridge-Aggregation 1 接口

[SW-Ethernet1/0/1]port link-aggregation group 1ip

[SW-Ethernet1/0/2]port link-aggregation group 1it

[SW-Bridge-Aggregation1]port link-type trunkio

[SW-Bridge-Aggregation1]port trunk permit vlan all 必须先加入端口再起Trunk，要否则会出错class

2、动态聚合配置

[SW]int Bridge-Aggaregation 1 端口

[SW-Bridge-Aggregation1]link-aggregation mode dynamic di

[SW-Ethernet1/0/1]port link-aggregation group 1

[SW-Ethernet1/0/2]port link-aggregation group 1

[SW-Bridge-Aggregation1]port link-type trunk

[SW-Bridge-Aggregation1]port trunk permit vlan all

查看命令：

display link-aggregation summary

[S1]display link-aggregation verbose

负载分担：

[S1]link-aggregation load-sharing mode destination-mac 两端都配置（貌似接口也能够配置）

三层聚合：

[R2]int Route-Aggregation 1

[R2-Route-Aggregation1]ip add 12.1.1.2 24

[R2]int g0/0

[R2-GigabitEthernet0/0]port link-aggregation group 1

[R2-GigabitEthernet0/0]int g0/1

[R2-GigabitEthernet0/1]port link-aggregation group 1

负载分担：

[R1]link-aggregation global load-sharing mode source-ip destination-ip基于源IP，目的IP