Kubernetes2-K8s的集群部署
1、简介
一、架构参考
二、实例架构
192.168.216.51 master etcdnode
192.168.216.53 node1linux
192.168.216.54 node1nginx
三、拓扑
四、软件版本
[root@master ~]# cat /etc/redhat-release CentOS Linux release 7.6.1810 (Core) [root@master ~]# uname -a Linux master 3.10.0-957.21.3.el7.x86_64 #1 SMP Tue Jun 18 16:35:19 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux [root@master ~]# [root@master ~]# docker version Client: Version: 1.13.1 API version: 1.26
kubernetes版本请见下面安装时候的依赖关系git
2、部署软件
一、修改主机名
1）按照以下名称修改主机名每台主机分别修改
hostnamectl set-hostname master
#hostnamectl set-hostname etcd 暂时不用此节点和master公用一个节点
hostnamectl set-hostname node1
hostnamectl set-hostname node2
2）并修改hosts文件
三台主机都修改hosts文件github
[root@node2 yum.repos.d]# cat >>/etc/hosts<<eof
> 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
> ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
> 192.168.216.51 master
> 192.168.216.52 etcd #由于作实验时候虚拟机有点问题，暂时不用此节点etcd和master一个节点
> 192.168.216.53 node1
> 192.168.216.54 node2
> eof
二、时间同步
三台节点都启用chronyd，保证时间同步docker
systemctl start chronyd
systemctl enable chronydjson
三、安装软件
master/etcd：kubenetes flannel etcdvim
yum install kubernetes etcd flannel ntp -y
Installed: etcd.x86_64 0:3.3.11-2.el7.centos flannel.x86_64 0:0.7.1-4.el7 kubernetes.x86_64 0:1.5.2-0.7.git269f928.el7 Dependency Installed: conntrack-tools.x86_64 0:1.4.4-5.el7_7.2 docker.x86_64 2:1.13.1-103.git7f2769b.el7.centos docker-client.x86_64 2:1.13.1-103.git7f2769b.el7.centos docker-common.x86_64 2:1.13.1-103.git7f2769b.el7.centos kubernetes-client.x86_64 0:1.5.2-0.7.git269f928.el7 kubernetes-master.x86_64 0:1.5.2-0.7.git269f928.el7 kubernetes-node.x86_64 0:1.5.2-0.7.git269f928.el7 libnetfilter_cthelper.x86_64 0:1.0.0-10.el7_7.1 libnetfilter_cttimeout.x86_64 0:1.0.0-6.el7_7.1 libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 socat.x86_64 0:1.7.3.2-2.el7 Updated: ntp.x86_64 0:4.2.6p5-29.el7.centos Dependency Updated: ntpdate.x86_64 0:4.2.6p5-29.el7.centos Complete! [root@master backup1]#
node1/node2centos
[root@node4 ~]# yum install kubernetes flannel ntp -y
[root@node3 ~]# yum install kubernetes flannel ntp -y
3、配置
一、配置etct
1）修改第6，10，23行为第七、十一、24行的内容便可，也就是标红部分
[root@etcd ~]# vim /etc/etcd/etcd.conf 6 #ETCD_LISTEN_CLIENT_URLS="http://localhost:2379" 7 ETCD_LISTEN_CLIENT_URLS="http://localhost:2379,http://192.168.216.51:2379" 10 #ETCD_NAME="default" 11 ETCD_NAME="etcd" 23 #ETCD_ADVERTISE_CLIENT_URLS="http://localhost:2379" 24 ETCD_ADVERTISE_CLIENT_URLS="http://192.168.216.51:2379"
2）配置文件含义
ETCD_NAME="etcd"
#etcd节点名称，若是etcd机器只有一台etcd能够不修改，保持默认default ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#数据存储目录 ETCD_LISTEN_CLIENT_URLS="http://localhost:2379,http://192.168.216.51:2379"
#etcd对外服务监听地址，通常指定2379端口，若是为0.0.0.0将会监听全部端口 ETCD_ADVERTISE_CLIENT_URLS="http://192.168.216.51:2379"
#这个是通知客户端的urls
3）启动服务
systemctl start etcd
systemctl status etcd
systemctl enable etcd
4）监听端口 2379
netstat -antup |grep 2379
5）查当作员列表
[root@master ~]# etcdctl member list
8e9e05c52164694d: name=etcd peerURLs=http://localhost:2380 clientURLs=http://192.168.216.51:2379 isLeader=true
[root@master ~]#
二、配置master服务器
1）修改kubernetes配置文件
修改第22行标红的
[root@master ~]# vim /etc/kubernetes/config 22 KUBE_MASTER="--master=http://192.168.216.51:8080"
2）配置文件意思
1 ### 2 # kubernetes system config 3 # 4 # The following values are used to configure various aspects of all 5 # kubernetes services, including 6 7 # kube-apiserver.service 8 # kube-controller-manager.service 9 # kube-scheduler.service 10 # kubelet.service 11 # kube-proxy.service 12 # logging to stderr means we get it in the systemd journal 13 KUBE_LOGTOSTDERR="--logtostderr=true" 14 #---表示错误日志记录道文件仍是输出道stderr标准错误输出 15 # journal message level, 0 is debug 16 KUBE_LOG_LEVEL="--v=0" 17 #---日志等级 18 # Should this cluster be allowed to run privileged docker containers 19 KUBE_ALLOW_PRIV="--allow-privileged=false" 20 #---是否运行运行特权容器，false是不容许 21 # How the controller-manager, scheduler, and proxy find the apiserver 22 KUBE_MASTER="--master=http://192.168.216.51:8080" 23 #---监听端口 ~
3）修改apiserver配置文件
修改标红部分
[root@master ~]# vim /etc/kubernetes/apiserver 1 ### 2 # kubernetes system config 3 # 4 # The following values are used to configure the kube-apiserver 5 # 6 7 # The address on the local server to listen to. 8 #KUBE_API_ADDRESS="--insecure-bind-address=127.0.0.1" 9 KUBE_API_ADDRESS="--insecure-bind-address=0.0.0.0" 10 #---监听的接口，修改成0.0.0.0监听全部端口 11 # The port on the local server to listen on. 12 # KUBE_API_PORT="--port=8080" 13 14 # Port minions listen on 15 # KUBELET_PORT="--kubelet-port=10250" 16 17 # Comma separated list of nodes in the etcd cluster 18 #KUBE_ETCD_SERVERS="--etcd-servers=http://127.0.0.1:2379" 19 KUBE_ETCD_SERVERS="--etcd-servers=http://192.168.216.51:2379" 20 #---etcd服务地址，以前配置的etcd服务 21 # Address range to use for services 22 KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16" 23 #---kubernetes能够分配的ip的范围，kubernetes启动的每一个pod以及service都会分配一个地址这里定义一个ip池 24 # default admission control policies 25 #KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny, ServiceAccount,ResourceQuota" 26 KUBE_ADMISSION_CONTROL="--admission-control=AlwaysAdmit" 27 #---不作限制，容许全部节点能够访问apiserver，对全部请求的容许
28 # Add your own! 29 KUBE_API_ARGS="" ~
4）配置kube-controller-manager配置文件
这里保持默认便可，先不用修改
[root@master ~]# cat /etc/kubernetes/controller-manager ### # The following values are used to configure the kubernetes controller-manager # defaults from config and apiserver should be adequate # Add your own! KUBE_CONTROLLER_MANAGER_ARGS="" [root@master ~]#
5）配置kube-schedule
[root@master ~]# vim /etc/kubernetes/scheduler ### # kubernetes scheduler config # default config should be adequate # Add your own! KUBE_SCHEDULER_ARGS="0.0.0.0" #---改成监听全部 ~
三、设置etcd网络
etcdctl mkdir /k8s/network
#---建立一个k8s/network用于存储flannel网络信息 etcdctl set /k8s/network/config '{"Network": "10.255.0.0/16"}'
#---给/k8s/network/config 赋一个字符串的值'{"Network": "10.255.0.0/16"}'，这个配置将用于flannel分配给每一个docker的虚拟ip地址段，用于配置在minion上的dockerip地址
[root@master ~]# etcdctl get /k8s/network/config
#---查看etcd网络配置记录
{"Network": "10.255.0.0/16"}
[root@master ~]#
四、flanneld
[root@master ~]# vim /etc/sysconfig/flanneld
# Flanneld configuration options
# etcd url location. Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://192.168.216.51:2379"
#---etcd url位置信息，指向运行的etcd服务器
# etcd config key. This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/k8s/network"
#---指定网络配置目录
# Any additional options that you want to pass
FLANNEL_OPTIONS="--iface=ens33"
#---指定网卡
[root@master ~]# systemctl restart flanneld
[root@master ~]# systemctl status flanneld
● flanneld.service - Flanneld overlay address etcd agent
Loaded: loaded (/usr/lib/systemd/system/flanneld.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2019-10-29 17:21:54 CST; 42min ago
Main PID: 12715 (flanneld)
CGroup: /system.slice/flanneld.service
└─12715 /usr/bin/flanneld -etcd-endpoints=http://192.168.216.51:2379 -etcd-prefix=/k8s/network --iface...
Oct 29 17:21:53 master systemd[1]: Starting Flanneld overlay address etcd agent...
Oct 29 17:21:54 master flanneld-start[12715]: I1029 17:21:54.022949 12715 main.go:132] Installing signal handlers
Oct 29 17:21:54 master flanneld-start[12715]: I1029 17:21:54.023985 12715 manager.go:149] Using interface w...6.51
Oct 29 17:21:54 master flanneld-start[12715]: I1029 17:21:54.024047 12715 manager.go:166] Defaulting extern....51)
Oct 29 17:21:54 master flanneld-start[12715]: I1029 17:21:54.048791 12715 local_manager.go:134] Found lease...sing
Oct 29 17:21:54 master flanneld-start[12715]: I1029 17:21:54.068556 12715 manager.go:250] Lease acquired: 1...0/24
Oct 29 17:21:54 master flanneld-start[12715]: I1029 17:21:54.069202 12715 network.go:98] Watching for new s...ases
Oct 29 17:21:54 master systemd[1]: Started Flanneld overlay address etcd agent.
Oct 29 17:38:56 master flanneld-start[12715]: I1029 17:38:56.822596 12715 network.go:191] Subnet added: 10....0/24
Oct 29 17:56:05 master flanneld-start[12715]: I1029 17:56:05.501411 12715 network.go:191] Subnet added: 10....0/24
Hint: Some lines were ellipsized, use -l to show in full.
[root@master ~]#
查看子网信息
[root@master ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.216.51 netmask 255.255.255.0 broadcast 192.168.216.255
inet6 fe80::3409:e73d:1ef:2e1 prefixlen 64 scopeid 0x20<link>
inet6 fe80::9416:80e8:f210:1e24 prefixlen 64 scopeid 0x20<link>
inet6 fe80::39cb:d8d1:a78b:9be1 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:1c:8b:39 txqueuelen 1000 (Ethernet)
RX packets 124978 bytes 149317395 (142.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 47636 bytes 5511781 (5.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
flannel0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1472
inet 10.255.16.0 netmask 255.255.0.0 destination 10.255.16.0
inet6 fe80::1837:1885:18c6:5e52 prefixlen 64 scopeid 0x20<link>
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 500 (UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3 bytes 144 (144.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 178940 bytes 55467759 (52.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 178940 bytes 55467759 (52.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:23:a5:7c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@master ~]#
[root@master ~]# cat /run/flannel/subnet.env
#---查看子网信息，以后会有一个脚本将subnet.env转写成一个docker的环境变量文件/run/flannel/docker
FLANNEL_NETWORK=10.255.0.0/16
FLANNEL_SUBNET=10.255.16.1/24
FLANNEL_MTU=1472
FLANNEL_IPMASQ=false
[root@master ~]#
[root@etcd ~]# cat /run/flannel/docker DOCKER_OPT_BIP="--bip=10.255.93.1/24" DOCKER_OPT_IPMASQ="--ip-masq=true" DOCKER_OPT_MTU="--mtu=1472" DOCKER_NETWORK_OPTIONS=" --bip=10.255.93.1/24 --ip-masq=true --mtu=1472" [root@etcd ~]#
五、配置node1
1）配置flanneld服务
[root@node1 ~]# vim /etc/sysconfig/flanneld # Flanneld configuration options # etcd url location. Point this to the server where etcd runs FLANNEL_ETCD_ENDPOINTS="http://192.168.216.51:2379" #---指定etcd服务器url # etcd config key. This is the configuration key that flannel queries # For address range assignment FLANNEL_ETCD_PREFIX="/k8s/network" #---指定网络配置目录 # Any additional options that you want to pass #FLANNEL_OPTIONS="--iface=ens33"
2）配置master地址和kube-proxy
[root@node1 ~]# vim /etc/kubernetes/config ### # kubernetes system config # # The following values are used to configure various aspects of all # kubernetes services, including # # kube-apiserver.service # kube-controller-manager.service # kube-scheduler.service # kubelet.service # kube-proxy.service # logging to stderr means we get it in the systemd journal KUBE_LOGTOSTDERR="--logtostderr=true" # journal message level, 0 is debug KUBE_LOG_LEVEL="--v=0" # Should this cluster be allowed to run privileged docker containers KUBE_ALLOW_PRIV="--allow-privileged=false" # How the controller-manager, scheduler, and proxy find the apiserver KUBE_MASTER="--master=http://192.168.216.51:8080"
#---指定master url地址
3）配置kube-proxy
主要是负责service的实现，就是实现内部从pod到service
这里保持默认便可
[root@node1 ~]# grep -v '^#' /etc/kubernetes/proxy KUBE_PROXY_ARGS="" [root@node1 ~]#
4）配置node1的kubelet
kubelet组件管理pod，pod中容器及容器的镜像和卷等信息
[root@node1 ~]# vim /etc/kubernetes/kubelet
1 ###
2 # kubernetes kubelet (minion) config
3
4 # The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
5 KUBELET_ADDRESS="--address=0.0.0.0"
6 #---监听全部地址
7 # The port for the info server to serve on
8 # KUBELET_PORT="--port=10250"
9
10 # You may leave this blank to use the actual hostname
11 KUBELET_HOSTNAME="--hostname-override=node1"
12
13 # location of the api-server
14 KUBELET_API_SERVER="--api-servers=http://192.168.216.51:8080"
15 #---api-servers-url地址
16 # pod infrastructure container
17 KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:lat est"
18
19 # Add your own!
20 KUBELET_ARGS=""
~
~
~
5）启动相关服务
[root@node1 ~]# systemctl restart flanneld kube-proxy kubelet docker [root@node1 ~]# systemctl enable flanneld kube-proxy kubelet docker
[root@node1 ~]# systemctl status flanneld kube-proxy kubelet docker
注意：这里kubelet可能没法正常启动，请见最后排错
6）查看ifconfig信息，及端口监听
[root@node1 ~]# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 10.255.41.1 netmask 255.255.255.0 broadcast 0.0.0.0
ether 02:42:22:ac:66:2f txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.216.53 netmask 255.255.255.0 broadcast 192.168.216.255
inet6 fe80::3409:e73d:1ef:2e1 prefixlen 64 scopeid 0x20<link>
inet6 fe80::9416:80e8:f210:1e24 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:79:23:62 txqueuelen 1000 (Ethernet)
RX packets 2490 bytes 802004 (783.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1853 bytes 397450 (388.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
flannel0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1472
inet 10.255.41.0 netmask 255.255.0.0 destination 10.255.41.0
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 500 (UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 76 bytes 6004 (5.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 76 bytes 6004 (5.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:23:a5:7c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@node1 ~]# netstat -antup |grep proxy tcp 0 0 127.0.0.1:10249 0.0.0.0:* LISTEN 918/kube-proxy tcp 0 0 192.168.216.53:58700 192.168.216.51:8080 ESTABLISHED 918/kube-proxy tcp 0 0 192.168.216.53:58698 192.168.216.51:8080 ESTABLISHED 918/kube-proxy [root@node1 ~]#
7）验证
master节点上经过kubectl命令查看
[root@master ~]# kubectl get node
NAME STATUS AGE
node1 Ready 17h
[root@master ~]#
看到node1 Ready 17h，就是成功了
六、配置node2，基本和node1一致
1）从node1发送配置文件到node2
scp /etc/sysconfig/flanneld 192.168.216.54:/etc/sysconfig/ scp /etc/kubernetes/config 192.168.216.54:/etc/kubernetes/ scp /etc/kubernetes/proxy 192.168.216.54:/etc/kubernetes/ scp /etc/kubernetes/kubelet 192.168.216.54:/etc/kubernetes/
2）只须要改一个文件
把node1换成node2
[root@node2 ~]# vim /etc/kubernetes/kubelet ### # kubernetes kubelet (minion) config # The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces) KUBELET_ADDRESS="--address="0.0.0.0" # The port for the info server to serve on # KUBELET_PORT="--port=10250" # You may leave this blank to use the actual hostname KUBELET_HOSTNAME="--hostname-override=node2" # location of the api-server KUBELET_API_SERVER="--api-servers=http://192.168.216.51:8080" # pod infrastructure container KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest" # Add your own! KUBELET_ARGS="" ~ ~
3）启动服务，并开机运行
systemctl restart flanneld kube-proxy kubelet docker
systemctl enable flanneld kube-proxy kubelet docker
七、master验证节点是否加入进来
看到status 为Ready状态证实成功加入到集群了
[root@master ~]# kubectl get node
NAME STATUS AGE
node1 Ready 17h node2 Ready 1m
[root@master ~]#
4、排错
针对没法启用kubelet的问题
一、查看启动详情
[root@node1 ~]# systemctl status -l kubelet ● kubelet.service - Kubernetes Kubelet Server Loaded: loaded (/usr/lib/systemd/system/kubelet.service; enabled; vendor preset: disabled) Active: failed (Result: start-limit) since Fri 2019-10-25 15:39:18 CST; 2s ago Docs: https://github.com/GoogleCloudPlatform/kubernetes Process: 71003 ExecStart=/usr/bin/kubelet $KUBE_LOGTOSTDERR $KUBE_LOG_LEVEL $KUBELET_API_SERVER $KUBELET_ADDRESS $KUBELET_PORT $KUBELET_HOSTNAME $KUBE_ALLOW_PRIV $KUBELET_POD_INFRA_CONTAINER $KUBELET_ARGS (code=exited, status=204/MEMORY) Main PID: 71003 (code=exited, status=204/MEMORY) Oct 25 15:39:17 node1 systemd[1]: kubelet.service: main process exited, code=exited, status=204/MEMORY Oct 25 15:39:17 node1 systemd[1]: Unit kubelet.service entered failed state. Oct 25 15:39:17 node1 systemd[1]: kubelet.service failed. Oct 25 15:39:18 node1 systemd[1]: kubelet.service holdoff time over, scheduling restart. Oct 25 15:39:18 node1 systemd[1]: start request repeated too quickly for kubelet.service Oct 25 15:39:18 node1 systemd[1]: Failed to start Kubernetes Kubelet Server. Oct 25 15:39:18 node1 systemd[1]: Unit kubelet.service entered failed state. Oct 25 15:39:18 node1 systemd[1]: kubelet.service failed. [root@node1 ~]# journalctl -f -u kubelet -- Logs begin at Thu 2019-10-24 19:20:13 CST. -- Oct 25 15:39:17 node1 systemd[1]: Started Kubernetes Kubelet Server. Oct 25 15:39:17 node1 systemd[1]: Starting Kubernetes Kubelet Server... Oct 25 15:39:17 node1 systemd[1]: kubelet.service: main process exited, code=exited, status=204/MEMORY Oct 25 15:39:17 node1 systemd[1]: Unit kubelet.service entered failed state. Oct 25 15:39:17 node1 systemd[1]: kubelet.service failed. Oct 25 15:39:18 node1 systemd[1]: kubelet.service holdoff time over, scheduling restart. Oct 25 15:39:18 node1 systemd[1]: start request repeated too quickly for kubelet.service Oct 25 15:39:18 node1 systemd[1]: Failed to start Kubernetes Kubelet Server. Oct 25 15:39:18 node1 systemd[1]: Unit kubelet.service entered failed state. Oct 25 15:39:18 node1 systemd[1]: kubelet.service failed.
二、查看日志
[root@master ~]# kubectl logs nginx-2187705812-0vkvm Error from server (BadRequest): container "nginx" in pod "nginx-2187705812-0vkvm" is waiting to start: ContainerCreating [root@master ~]# kubectl describe pod Name: nginx-2187705812-0vkvm Namespace: default Node: node1/192.168.216.53 Start Time: Mon, 04 Nov 2019 16:26:33 +0800 Labels: pod-template-hash=2187705812 run=nginx Status: Pending IP: Controllers: ReplicaSet/nginx-2187705812 Containers: nginx: Container ID: Image: docker.io/nginx Image ID: Port: 9000/TCP State: Waiting Reason: ContainerCreating Ready: False Restart Count: 0 Volume Mounts: <none> Environment Variables: <none> Conditions: Type Status Initialized True Ready False PodScheduled True No volumes. QoS Class: BestEffort Tolerations: <none> Events: FirstSeen LastSeen Count From SubObjectPath Type Reason Message --------- -------- ----- ---- ------------- -------- ------ ------- 3m 3m 1 {default-scheduler } Normal Scheduled Successfully assigned nginx-2187705812-0vkvm to node1 <invalid> <invalid> 20 {kubelet node1} Warning MissingClusterDNS kubelet does not have ClusterDNS IP configured and cannot create Pod using "ClusterFirst" policy. Falling back to DNSDefault policy. <invalid> <invalid> 20 {kubelet node1} Warning FailedSync Error syncing pod, skipping: failed to "StartContainer" for "POD" with RunContainerError: "runContainer: Error response from daemon: {\"message\":\"oci runtime error: container_linux.go:235: starting container process caused \\\"process_linux.go:258: applying cgroup configuration for process caused \\\\\\\"Cannot set property TasksAccounting, or unknown property.\\\\\\\"\\\"\\n\"}"
三、交换内存
对应方法是禁用 swap
swapoff -a
四、kubelet文件驱动默认cgroupfs, 而咱们安装的docker使用的文件驱动是systemd，更改驱动
1)方法1，这个方法不行，修改后启动docker有问题
#修改daemon.json vi /etc/docker/daemon.json #添加以下属性 "exec-opts": [ "native.cgroupdriver=systemd" ]
2）方法2，修改docker.service
# 修改docker.service vi /lib/systemd/system/docker.service 找到 --exec-opt native.cgroupdriver=systemd \ 修改成： --exec-opt native.cgroupdriver=cgroupfs \
查看是否更改为功
docker info
四、虚拟机问题，就从新作了一遍就ok了
若是上面都不行，估计和我这里同样应该是虚拟机问题，从新恢复镜像从新作了一遍发现没问题
5、配置流程总结：