定时器0的方式1 定时器1的方式1 数码管和led

版权声明：本文为博主原创文章。未经博主赞成不得转载。 https://blog.csdn.net/u011046042/article/details/37881715

#include<reg52.h> #define uchar unsigned char #define uint unsigned int sbit dula=P2^6; sbit wela=P2^7; sbit led1=P1^0; uchar code table[]= {0x3f,0x06,0x5b,0x4f,0x66,   0x6d,0x7d,0x07,0x7f,0x6f, 0x77,0x7c,0x39,0x5e,0x79,0x71 }; void delayms(uint); void display(uchar,uchar); uchar num,num1,num2,shi,ge; void main() {  TMOD=0x01;//设置定时器0和1为工做方式1（00010001）TH0=(65536-45872)/256;//装初值TL0=(65536-45872)%256;TH1=(65536-45872)/256;//装初值TL1=(65536-45872)%256;EA=1;ET0=1;ET1=1;TR0=1;TR1=1;while(1){display(shi,ge);} } void display(uchar shi,uchar ge) {dula=1;P0=table[shi];dula=0;wela=1;P0=0xfe;wela=0;delayms(5);dula=1;P0=table[ge];dula=0;wela=1;P0=0xfd;wela=0;delayms(5); } void delayms(uint xms) {uint i,j;for(i=xms;i>0;i--)for(j=110;j>0;j--); } void T0_time() interrupt 1 {TH0=(65536-45872)/256;//重装初值TL0=(65536-45872)%256;num1++;if(num1==4) //假设到了4次，说明200ms的时间到了{num1=0; //而后吧num1清0又一次再计4次led1=~led1; //让发光管状态取反} } void T1_time() interrupt 3 {TH1=(65536-45872)/256;//重装初值TL1=(65536-45872)%256;num2++;if(num2==200) //假设到了20次，说明1秒时间到{num2=0; //清0，再计时num++;if(num==60) //到60归0num=0;shi=num/10;ge=num%10;} }