Given an array, rotate the array to the right by k steps, where k is non-negative.html
Example 1:git
Input: and k = 3 Output: Explanation: rotate 1 steps to the right: rotate 2 steps to the right: rotate 3 steps to the right: [1,2,3,4,5,6,7][5,6,7,1,2,3,4][7,1,2,3,4,5,6][6,7,1,2,3,4,5][5,6,7,1,2,3,4]
Example 2:github
Input: and k = 2 Output: [3,99,-1,-100] Explanation: rotate 1 steps to the right: [99,-1,-100,3] rotate 2 steps to the right: [3,99,-1,-100] [-1,-100,3,99]
Note:算法
Credits:
Special thanks to @Freezen for adding this problem and creating all test cases.数组
新题抢先刷,这道题标为 Easy,应该不是很难,咱们先来看一种 O(n) 的空间复杂度的方法,咱们复制一个和 nums 同样的数组,而后利用映射关系 i -> (i+k)%n 来交换数字。代码以下:post
解法一:this
class Solution { public: void rotate(vector<int>& nums, int k) { vector<int> t = nums; for (int i = 0; i < nums.size(); ++i) { nums[(i + k) % nums.size()] = t[i]; } } };
因为提示中要求咱们空间复杂度为 O(1),因此咱们不能用辅助数组,上面的思想仍是可使用的,可是写法就复杂的多,并且须要用到不少的辅助变量,咱们仍是要将 nums[idx] 上的数字移动到 nums[(idx+k) % n] 上去,为了防止数据覆盖丢失,咱们须要用额外的变量来保存,这里用了 pre 和 cur,其中 cur 初始化为了数组的第一个数字,而后固然须要变量 idx 标明当前在交换的位置,还须要一个变量 start,这个是为了防止陷入死循环的,初始化为0,一旦当 idx 变到了 strat 的位置,则 start 自增1,再赋值给 idx,这样 idx 的位置也改变了,能够继续进行交换了。举个例子,假如 [1, 2, 3, 4], K=2 的话,那么 idx=0,下一次变为 idx = (idx+k) % n = 2,再下一次又变成了 idx = (idx+k) % n = 0,此时明显 1 和 3 的位置尚未处理过,因此当咱们发现 idx 和 start 相等,则两者均自增1,那么此时 idx=1,下一次变为 idx = (idx+k) % n = 3,就能够交换完全部的数字了。url
由于长度为n的数组只须要更新n次,因此咱们用一个 for 循环来处理n次。首先 pre 更新为 cur,而后计算新的 idx 的位置,而后将 nums[idx] 上的值先存到 cur 上,而后把 pre 赋值给 nums[idx],这至关于把上一轮的 nums[idx] 赋给了新的一轮,完成了数字的交换,而后 if 语句判断是否会变处处理过的数字,参见上面一段的解释,咱们用题目中的例子1来展现下面这种算法的 nums 的变化过程:spa
1 2 3 4 5 6 7
1 2 3 1 5 6 7
1 2 3 1 5 6 4
1 2 7 1 5 6 4
1 2 7 1 5 3 4
1 6 7 1 5 3 4
1 6 7 1 2 3 4
5 6 7 1 2 3 4code
解法二:
class Solution { public: void rotate(vector<int>& nums, int k) { if (nums.empty() || (k %= nums.size()) == 0) return; int start = 0, idx = 0, pre = 0, cur = nums[0], n = nums.size(); for (int i = 0; i < n; ++i) { pre = cur; idx = (idx + k) % n; cur = nums[idx]; nums[idx] = pre; if (idx == start) { idx = ++start; cur = nums[idx]; } } } };
根据热心网友 waruzhi 的留言,这道题其实还有种相似翻转字符的方法,思路是先把前 n-k 个数字翻转一下,再把后k个数字翻转一下,最后再把整个数组翻转一下:
1 2 3 4 5 6 7
4 3 2 1 5 6 7
4 3 2 1 7 6 5
5 6 7 1 2 3 4
解法三:
class Solution { public: void rotate(vector<int>& nums, int k) { if (nums.empty() || (k %= nums.size()) == 0) return; int n = nums.size(); reverse(nums.begin(), nums.begin() + n - k); reverse(nums.begin() + n - k, nums.end()); reverse(nums.begin(), nums.end()); } };
因为旋转数组的操做也能够看作从数组的末尾取k个数组放入数组的开头,因此咱们用 STL 的 push_back 和 erase 能够很容易的实现这些操做。
解法四:
class Solution { public: void rotate(vector<int>& nums, int k) { if (nums.empty() || (k %= nums.size()) == 0) return; int n = nums.size(); for (int i = 0; i < n - k; ++i) { nums.push_back(nums[0]); nums.erase(nums.begin()); } } };
下面这种方法其实还蛮独特的,经过不停的交换某两个数字的位置来实现旋转,根据网上这个帖子的思路改写而来,数组改变过程以下:
1 2 3 4 5 6 7
5 2 3 4 1 6 7
5 6 3 4 1 2 7
5 6 7 4 1 2 3
5 6 7 1 4 2 3
5 6 7 1 2 4 3
5 6 7 1 2 3 4
解法五:
class Solution { public: void rotate(vector<int>& nums, int k) { if (nums.empty()) return; int n = nums.size(), start = 0; while (n && (k %= n)) { for (int i = 0; i < k; ++i) { swap(nums[i + start], nums[n - k + i + start]); } n -= k; start += k; } } };
Github 同步地址:
https://github.com/grandyang/leetcode/issues/189
相似题目:
参考资料:
https://leetcode.com/problems/rotate-array/
https://leetcode.com/problems/rotate-array/discuss/54250/Easy-to-read-Java-solution
https://leetcode.com/problems/rotate-array/discuss/54277/Summary-of-C%2B%2B-solutions