华为交换机vlan划分经常使用命令

进入视图                               system-view

进入接口                               interface (Ethernet|GigabitEthernet) (0/0/1-0/0/48)

配置端口为trunk模式            port link-type trunk

配置trunk容许经过的Vlan     vlan- port trunk allow-pass vlan all

端口组                                  port-group 1

添加端口组                           group-member GigabitEthernet (port0/0/1-48) 

                                            to GigabitEthernet (port/0/0/1-28)

添加端口到指定vlan             port default vlan (id)

添加vlan                              vlan (id)

在vlan中添加多个接口          port Ethernet port0/0/1 to 0/0/48