Centos-7.4_安装_Redis_4.0.8

1、安装redis

第一步：下载redis安装包

[root@Redis ~]# mkdir /usr/local/redis/　　　　　　　　　　　　　　　　　　　　　　--建立目录

[root@Redis redis]# cd /usr/local/redis/　　　　　　　　　　　　　　　　　　　　　   --进入当前目录

[root@Redis ~]# wget http://download.redis.io/releases/redis-4.0.8.tar.gz　　　　　　　--下载软件包
--2018-12-30 12:20:30-- http://download.redis.io/releases/redis-4.0.8.tar.gz
正在解析主机 download.redis.io (download.redis.io)... 109.74.203.151
正在链接 download.redis.io (download.redis.io)|109.74.203.151|:80... 已链接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：1729973 (1.6M) [application/x-gzip]
正在保存至: “redis-4.0.8.tar.gz”

100%[===================================================================================================================================================>] 1,729,973 841KB/s 用时 2.0s

2018-12-30 12:20:32 (841 KB/s) - 已保存 “redis-4.0.8.tar.gz” [1729973/1729973])

 

第二步：解压压缩包

[root@Redis redis]# tar -zxvf redis-4.0.8.tar.gz

第三步：yum安装gcc依赖

[root@Redis redis]# yum -y install gcc-*

第四步：跳转到redis解压目录下

[root@Redis redis]# cd redis-4.0.8/

第五步：编译安装

[root@Redis redis]# make MALLOC=libc

将/usr/local/redis-4.0.8/src目录下的文件加到/usr/local/bin目录

cd src && make install

[root@Redis redis-4.0.8]# cd src && make install
CC Makefile.dep

Hint: It's a good idea to run 'make test' ;)

INSTALL install
INSTALL install
INSTALL install
INSTALL install
INSTALL install

2、启动redis的三种方式

先切换到redis src目录下

[root@Redis redis-4.0.8]# cd src/

一、直接启动redis

[root@Redis src]# ./redis-server
35611:C 30 Dec 12:16:11.035 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
35611:C 30 Dec 12:16:11.036 # Redis version=4.0.8, bits=64, commit=00000000, modified=0, pid=35611, just started
35611:C 30 Dec 12:16:11.036 # Warning: no config file specified, using the default config. In order to specify a config file use ./redis-server /path/to/redis.conf
35611:M 30 Dec 12:16:11.036 * Increased maximum number of open files to 10032 (it was originally set to 1024).
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 4.0.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 35611
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'

35611:M 30 Dec 12:16:11.037 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
35611:M 30 Dec 12:16:11.037 # Server initialized
35611:M 30 Dec 12:16:11.037 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
35611:M 30 Dec 12:16:11.037 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
35611:M 30 Dec 12:16:11.037 * Ready to accept connections

如上图：redis启动成功，可是这种启动方式须要一直打开窗口，不能进行其余操做，不太方便。

按 ctrl + c能够关闭窗口。

二、之后台进程方式启动redis

第一步：修改redis.conf文件

[root@Redis src]# vim /usr/local/redis/redis-4.0.8/redis.conf 

将

daemonize no

修改成

daemonize yes

第二步：指定redis.conf文件启动

[root@Redis src]# ./redis-server /usr/local/redis/redis-4.0.8/redis.conf
45390:C 30 Dec 12:42:32.886 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
45390:C 30 Dec 12:42:32.886 # Redis version=4.0.8, bits=64, commit=00000000, modified=0, pid=45390, just started
45390:C 30 Dec 12:42:32.886 # Configuration loaded

第三步：关闭redis进程

首先使用ps -aux | grep redis查看redis进程

[root@Redis src]# ps -aux | grep redis
root 45391 0.0 0.0 141816 2004 ? Rsl 12:42 0:00 ./redis-server 127.0.0.1:6379

使用kill命令杀死进程

[root@Redis src]# kill -9 45391

三、设置redis开机自启动

一、在/etc目录下新建redis目录

mkdir redis

[root@Redis src]# mkdir /etc/redis

二、将/usr/local/redis/redis-4.0.8/redis.conf 文件复制一份到/etc/redis目录下，并命名为6379.conf

[root@Redis src]# cp /usr/local/redis/redis-4.0.8/redis.conf /etc/redis/6379.com 

三、将redis的启动脚本复制一份放到/etc/init.d目录下

[root@Redis src]# cp /usr/local/redis/redis-4.0.8/utils/redis_init_script /etc/init.d/redisd

四、设置redis开机自启动

先切换到/etc/init.d目录下

而后执行自启命令

[root@Redis init.d]# chkconfig redisd on
服务 redisd 不支持 chkconfig

看结果是redisd不支持chkconfig

解决方法：

使用vim编辑redisd文件，在第一行加入以下两行注释，保存退出

注释的意思是，redis服务必须在运行级2，3，4，5下被启动或关闭，启动的优先级是90，关闭的优先级是10。

再次执行开机自启命令，成功

[root@Redis init.d]# chkconfig redisd on

如今能够直接已服务的形式启动和关闭redis了

启动：

service redisd start

若是出现以下问题：

[root@Redis ~]# service redisd start　
Please use start or stop as first argument

可用安装文件启动     redis-server /etc/redis/6379.conf

[root@Redis ~]# redis-server /etc/redis/6379.conf
9562:C 30 Dec 13:44:57.160 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
9562:C 30 Dec 13:44:57.160 # Redis version=4.0.8, bits=64, commit=00000000, modified=0, pid=9562, just started
9562:C 30 Dec 13:44:57.160 # Configuration loaded

参考文件：

redis报错可参考资料：http://blog.csdn.net/luozhonghua2014/article/details/54649295

redis安装可参考资料：http://blog.csdn.net/zc474235918/article/details/50974483

redis安装可参考资料：http://blog.csdn.net/gxw19874/article/details/51992125