背景：容器镜像须要安装pyhive，可是容器不能访问公网（宿主机也不行），只能离线安装。html
Linux下安装Python3.6和第三方库python
centos7sql
在本身电脑安装了VMware workstation，选择和容器同样的操做系统，避免没必要要的报错。docker
为了更好的适配容器，我选择的是最小化安装且不安装第三方 1.关闭selinux # sed -i 's/=enforcing/=disabled/g' /etc/selinux/config 2.关闭防火墙 # systemctl stop firewalld 3.开启yum缓存rpm包到指定位置（由于pyhive模块须要依赖） # vi /etc/yum.conf [main] cachedir=/soft #自定义路径 keepcache=1 #缓存是否保存：0--关闭，1--开启 4.更换yum源 # mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup # curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo # yum makecache
python-3.6.5.tar.gzshell
上传python-3.6.5.tar.gz到刚刚安装的虚拟机 1.安装依赖环境 # yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel 2.建立工程目录： # mkdir -p /usr/local/python3 3.解压源码包 # tar -zxvf Python-3.6.5.tgz 4.进入解压后的目录，编译安装。 # cd Python-3.6.5 # ./configure --prefix=/usr/local/python3 # make && make install 5.创建python3的软连接 # ln -s /usr/local/python3/bin/python3 /usr/bin/python3 6.添加环境变量 # vim ~/.bash_profile PATH=$PATH:$HOME/bin:/usr/local/python3/bin export PATH # source ~/.bash_profile 7.查看python版本 # python3 -V
这里也是一步步试出来的，放到一块儿避免没必要要报错 1.安装依赖包 # yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel # yum -y install gcc # yum -y install gcc-c++ # yum -y install python-devel # yum -y install gcc libffi-devel python-devel openssl-devel # yum -y install libffi-devel python-devel openssl-devel # yum -y install cyrus-sasl cyrus-sasl-devel cyrus-sasl-lib # yum -y install createrepo # yum -y install vim 2.制做repo源，后面容器须要用 # cd /soft/base/ # createrepo packages
1.将全部包下载到这个目录中，方便导入到镜像 # mkdir -p /soft/pyhive 2.更新pip并更换镜像，使下载速度快些 # pip3 install pip -U # pip3 config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple 3.安装pyhive # pip3 install pyhive # pip3 install thrift # pip3 install sasl # pip3 install thrift_sasl 4.将包放至/soft/pyhive # cd /soft/pyhive # pip freeze > requirements.txt # 将全部包下载到DIR这个目录中 # pip download -d /soft/pyhive -r requirements.txt # pip wheel -w /soft/pyhive -r requirements.txt 5.查看包 # ll total 1192 -rw-r--r-- 1 root root 829220 Nov 18 21:57 future-0.18.2.tar.gz -rw-r--r-- 1 root root 41400 Nov 18 21:57 PyHive-0.6.3.tar.gz -rw-r--r-- 1 root root 227183 Nov 18 21:57 python_dateutil-2.8.1-py2.py3-none-any.whl -rw-r--r-- 1 root root 110 Nov 18 22:25 requirements.txt -rw-r--r-- 1 root root 30409 Nov 18 22:25 sasl-0.2.1.tar.gz -rw-r--r-- 1 root root 10963 Nov 18 21:58 six-1.15.0-py2.py3-none-any.whl -rw-r--r-- 1 root root 59911 Nov 18 22:01 thrift-0.13.0.tar.gz -rw-r--r-- 1 root root 3944 Nov 18 22:25 thrift_sasl-0.4.2.tar.gz # cat requirements.txt future==0.18.2 PyHive==0.6.3 python-dateutil==2.8.1 sasl==0.2.1 six==1.15.0 thrift==0.13.0 thrift-sasl==0.4.2
依赖的rpm包在/soft/base/packages # cp -r /soft/base/packages /soft # cd /soft # tar -zcvf pyhive.tar.gz pyhive packages
1.查看容器ID（我这里是7b36e3a4cbf6） # docker ps 2.将宿主机的rpm包移动到/tmp/hyq，并压缩 # cp -r /etc/cdrom /tmp/hyq # cd /tmp/hyq # tar -zcvf cdrom.tar.gz cdrom 3.将pyhive.tar.gz上传到/tmp/hyq 4.将cdrom.tar.gz和pyhive.tar.gz上传到容器 # docker cp cdrom.tar.gz 7b36e3a4cbf6:/root # docker cp pyhive.tar.gz 7b36e3a4cbf6:/root
1.进入容器 # docker exec -it 7b36e3a4cbf6 /bin/bash 2.配置yum源 # vi /etc/yum.repo.d/local.repo [packages] name=packages baseurl=file:///root/packages enabled=1 gpgcheck=0 [cdrom] name=cdrom baseurl=file:///root/cdrom enabled=1 gpgcheck=0 # yum repolist 3.解压tar包 # cd /root # tar xf cdrom.tar.gz # tar xf pyhive.tar.gz 4.yum安装依赖 # yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel # yum -y install gcc # yum -y install gcc-c++ # yum -y install python-devel # yum -y install gcc libffi-devel python-devel openssl-devel # yum -y install libffi-devel python-devel openssl-devel # yum -y install cyrus-sasl cyrus-sasl-devel cyrus-sasl-lib 5.安装pyhive # cd /root/pyhive pip install --no-index --find-links=/root/pyhive -r requirements.txt
#!/usr/bin/python
from pyhive import hive
conn = hive.Connection(host='66.1.30.10',port=10000,username='dwetl',database='default')
cursor = conn.cursor()
cursor.execute('show databases')
for result in cursor.fetchall():
print(result)
cursor.execute('show tables')
for table in cursor.fetchall():
print(table)
# docker commit 7b36e3a4cbf6 镜像名:tag
[root@localhost Python-3.6.5]# cd /soft/
[root@localhost soft]# ls
base epel extras timedhosts timedhosts.txt updates
[root@localhost soft]# mkdir pyhive
[root@localhost soft]# pip3 -V
pip 9.0.3 from /usr/local/python3/lib/python3.6/site-packages (python 3.6)
[root@localhost soft]# pip install pyhive
-bash: pip: command not found
[root@localhost soft]# pip3 install pyhive
Collecting pyhive
Downloading https://files.pythonhosted.org/packages/f8/f3/666dd810fa88c3cb9fea2c39817242036dee963ff62291f7c0f8fe34a8e1/PyHive-0.6.3.tar.gz (41kB)
100% |████████████████████████████████| 51kB 71kB/s
Collecting future (from pyhive)
Downloading https://files.pythonhosted.org/packages/45/0b/38b06fd9b92dc2b68d58b75f900e97884c45bedd2ff83203d933cf5851c9/future-0.18.2.tar.gz (829kB)
86% |███████████████████████████▋ | 716kB 4.4kB/s eta 0:00:26Exception:
Traceback (most recent call last):
File "/usr/local/python3/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 302, in _error_catcher
yield
File "/usr/local/python3/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 384, in read
data = self._fp.read(amt)
File "/usr/local/python3/lib/python3.6/site-packages/pip/_vendor/cachecontrol/filewrapper.py", line 60, in read
data = self.__fp.read(amt)
File "/usr/local/python3/lib/python3.6/http/client.py", line 449, in read
n = self.readinto(b)
File "/usr/local/python3/lib/python3.6/http/client.py", line 493, in readinto
n = self.fp.readinto(b)
File "/usr/local/python3/lib/python3.6/socket.py", line 586, in readinto
return self._sock.recv_into(b)
File "/usr/local/python3/lib/python3.6/ssl.py", line 1009, in recv_into
return self.read(nbytes, buffer)
File "/usr/local/python3/lib/python3.6/ssl.py", line 871, in read
return self._sslobj.read(len, buffer)
File "/usr/local/python3/lib/python3.6/ssl.py", line 631, in read
v = self._sslobj.read(len, buffer)
socket.timeout: The read operation timed out
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/python3/lib/python3.6/site-packages/pip/basecommand.py", line 215, in main
status = self.run(options, args)
File "/usr/local/python3/lib/python3.6/site-packages/pip/commands/install.py", line 324, in run
requirement_set.prepare_files(finder)
File "/usr/local/python3/lib/python3.6/site-packages/pip/req/req_set.py", line 380, in prepare_files
ignore_dependencies=self.ignore_dependencies))
File "/usr/local/python3/lib/python3.6/site-packages/pip/req/req_set.py", line 620, in _prepare_file
session=self.session, hashes=hashes)
File "/usr/local/python3/lib/python3.6/site-packages/pip/download.py", line 821, in unpack_url
hashes=hashes
File "/usr/local/python3/lib/python3.6/site-packages/pip/download.py", line 659, in unpack_http_url
hashes)
File "/usr/local/python3/lib/python3.6/site-packages/pip/download.py", line 882, in _download_http_url
_download_url(resp, link, content_file, hashes)
File "/usr/local/python3/lib/python3.6/site-packages/pip/download.py", line 603, in _download_url
hashes.check_against_chunks(downloaded_chunks)
File "/usr/local/python3/lib/python3.6/site-packages/pip/utils/hashes.py", line 46, in check_against_chunks
for chunk in chunks:
File "/usr/local/python3/lib/python3.6/site-packages/pip/download.py", line 571, in written_chunks
for chunk in chunks:
File "/usr/local/python3/lib/python3.6/site-packages/pip/utils/ui.py", line 139, in iter
for x in it:
File "/usr/local/python3/lib/python3.6/site-packages/pip/download.py", line 560, in resp_read
decode_content=False):
File "/usr/local/python3/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 436, in stream
data = self.read(amt=amt, decode_content=decode_content)
File "/usr/local/python3/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 401, in read
raise IncompleteRead(self._fp_bytes_read, self.length_remaining)
File "/usr/local/python3/lib/python3.6/contextlib.py", line 99, in __exit__
self.gen.throw(type, value, traceback)
File "/usr/local/python3/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 307, in _error_catcher
raise ReadTimeoutError(self._pool, None, 'Read timed out.')
pip._vendor.urllib3.exceptions.ReadTimeoutError: HTTPSConnectionPool(host='files.pythonhosted.org', port=443): Read timed out.
You are using pip version 9.0.3, however version 20.2.4 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
[root@localhost soft]# pip3 -V
pip 9.0.3 from /usr/local/python3/lib/python3.6/site-packages (python 3.6)
[root@localhost soft]# pip3 install --upgrade pip
Collecting pip
Downloading https://files.pythonhosted.org/packages/cb/28/91f26bd088ce8e22169032100d4260614fc3da435025ff389ef1d396a433/pip-20.2.4-py2.py3-none-any.whl (1.5MB)
100% |████████████████████████████████| 1.5MB 19kB/s
Installing collected packages: pip
Found existing installation: pip 9.0.3
Uninstalling pip-9.0.3:
Successfully uninstalled pip-9.0.3
Successfully installed pip-20.2.4
[root@localhost soft]# pip3 install pyhive
Collecting pyhive
Using cached PyHive-0.6.3.tar.gz (41 kB)
Collecting future
Downloading future-0.18.2.tar.gz (829 kB)
|████████████████████████████████| 829 kB 5.3 kB/s
Collecting python-dateutil
Downloading python_dateutil-2.8.1-py2.py3-none-any.whl (227 kB)
|████████████████████████████████| 227 kB 5.3 kB/s
Requirement already satisfied: six>=1.5 in /usr/local/python3/lib/python3.6/site-packages (from pyth on-dateutil->pyhive) (1.15.0)
Using legacy 'setup.py install' for pyhive, since package 'wheel' is not installed.
Using legacy 'setup.py install' for future, since package 'wheel' is not installed.
Installing collected packages: future, python-dateutil, pyhive
Running setup.py install for future ... done
Running setup.py install for pyhive ... done
Successfully installed future-0.18.2 pyhive-0.6.3 python-dateutil-2.8.1
[root@localhost soft]# cd pyhive/
[root@localhost pyhive]# pip3 freeze > requirements.txt
[root@localhost pyhive]# pip3 download -d /soft/pyhive -r requirements.txt
Collecting future==0.18.2
Using cached future-0.18.2.tar.gz (829 kB)
Saved ./future-0.18.2.tar.gz
Collecting PyHive==0.6.3
Using cached PyHive-0.6.3.tar.gz (41 kB)
Saved ./PyHive-0.6.3.tar.gz
Collecting python-dateutil==2.8.1
Using cached python_dateutil-2.8.1-py2.py3-none-any.whl (227 kB)
Saved ./python_dateutil-2.8.1-py2.py3-none-any.whl
Collecting six==1.15.0
Using cached six-1.15.0-py2.py3-none-any.whl (10 kB)
Saved ./six-1.15.0-py2.py3-none-any.whl
Successfully downloaded future PyHive python-dateutil six
[root@localhost pyhive]# pip3 wheel -w /soft/pyhive -r requirements.txt
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<pip._vendor.urllib3.connect ion.HTTPSConnection object at 0x7f5e28758128>: Failed to establish a new connection: [Errno -2] Name or service not known',)': /simple/future/
Collecting future==0.18.2
Using cached future-0.18.2.tar.gz (829 kB)
Collecting PyHive==0.6.3
Using cached PyHive-0.6.3.tar.gz (41 kB)
Collecting python-dateutil==2.8.1
File was already downloaded /soft/pyhive/python_dateutil-2.8.1-py2.py3-none-any.whl
Collecting six==1.15.0
File was already downloaded /soft/pyhive/six-1.15.0-py2.py3-none-any.whl
Skipping python-dateutil, due to already being wheel.
Skipping six, due to already being wheel.
Building wheels for collected packages: future, PyHive
Building wheel for future (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-qz8xddf1/future/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-qz8xddf1/future/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-hs1xwclv
cwd: /tmp/pip-wheel-qz8xddf1/future/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for future
Running setup.py clean for future
Building wheel for PyHive (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-qz8xddf1/pyhive/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-qz8xddf1/pyhive/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-s7uf9n71
cwd: /tmp/pip-wheel-qz8xddf1/pyhive/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for PyHive
Running setup.py clean for PyHive
Failed to build future PyHive
ERROR: Failed to build one or more wheels
[root@localhost pyhive]# pip3 install thrift
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<pip._vendor.urllib3.connect ion.HTTPSConnection object at 0x7f37aedcc208>: Failed to establish a new connection: [Errno -2] Name or service not known',)': /simple/thrift/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<pip._vendor.urllib3.connect ion.HTTPSConnection object at 0x7f37aedcc320>: Failed to establish a new connection: [Errno -2] Name or service not known',)': /simple/thrift/
Collecting thrift
Downloading thrift-0.13.0.tar.gz (59 kB)
|████████████████████████████████| 59 kB 3.3 kB/s
Requirement already satisfied: six>=1.7.2 in /usr/local/python3/lib/python3.6/site-packages (from thrift) (1.15.0)
Using legacy 'setup.py install' for thrift, since package 'wheel' is not installed.
Installing collected packages: thrift
Running setup.py install for thrift ... done
Successfully installed thrift-0.13.0
[root@localhost pyhive]# pip3 freeze > requirements.txt
[root@localhost pyhive]# pip3 download -d /soft/pyhive -r requirements.txt
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting future==0.18.2
File was already downloaded /soft/pyhive/future-0.18.2.tar.gz
Collecting PyHive==0.6.3
File was already downloaded /soft/pyhive/PyHive-0.6.3.tar.gz
Collecting python-dateutil==2.8.1
File was already downloaded /soft/pyhive/python_dateutil-2.8.1-py2.py3-none-any.whl
Collecting six==1.15.0
File was already downloaded /soft/pyhive/six-1.15.0-py2.py3-none-any.whl
Collecting thrift==0.13.0
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/97/1e/3284d19d7be99305eda145b8aa46b0c33244e4a496ec66440dac19f8274d/thrift-0.13.0.tar.gz (59 kB)
|████████████████████████████████| 59 kB 611 kB/s
Saved ./thrift-0.13.0.tar.gz
Successfully downloaded future PyHive python-dateutil six thrift
[root@localhost pyhive]# pip3 wheel -w /soft/pyhive -r requirements.txt
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting future==0.18.2
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/45/0b/38b06fd9b92dc2b68d58b75f900e97884c45bedd2ff83203d933cf5851c9/future-0.18.2.tar.gz (829 kB)
|████████████████████████████████| 829 kB 144 kB/s
Collecting PyHive==0.6.3
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/f8/f3/666dd810fa88c3cb9fea2c39817242036dee963ff62291f7c0f8fe34a8e1/PyHive-0.6.3.tar.gz (41 kB)
|████████████████████████████████| 41 kB 302 kB/s
Collecting python-dateutil==2.8.1
File was already downloaded /soft/pyhive/python_dateutil-2.8.1-py2.py3-none-any.whl
Collecting six==1.15.0
File was already downloaded /soft/pyhive/six-1.15.0-py2.py3-none-any.whl
Collecting thrift==0.13.0
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/97/1e/3284d19d7be99305eda145b8aa46b0c33244e4a496ec66440dac19f8274d/thrift-0.13.0.tar.gz (59 kB)
Skipping python-dateutil, due to already being wheel.
Skipping six, due to already being wheel.
Building wheels for collected packages: future, PyHive, thrift
Building wheel for future (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-f1m3bxs_/future/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-f1m3bxs_/future/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-zkw8asdy
cwd: /tmp/pip-wheel-f1m3bxs_/future/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for future
Running setup.py clean for future
Building wheel for PyHive (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-f1m3bxs_/pyhive/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-f1m3bxs_/pyhive/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-1x0e_y0u
cwd: /tmp/pip-wheel-f1m3bxs_/pyhive/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for PyHive
Running setup.py clean for PyHive
Building wheel for thrift (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-f1m3bxs_/thrift/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-f1m3bxs_/thrift/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-h03q21z7
cwd: /tmp/pip-wheel-f1m3bxs_/thrift/
Complete output (8 lines):
/usr/local/python3/lib/python3.6/distutils/dist.py:261: UserWarning: Unknown distribution option: 'long_description_content_type'
warnings.warn(msg)
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for thrift
Running setup.py clean for thrift
Failed to build future PyHive thrift
ERROR: Failed to build one or more wheels
[root@localhost pyhive]# pip3 install sasl
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<pip._vendor.urllib3.connect ion.HTTPSConnection object at 0x7febbc873400>: Failed to establish a new connection: [Errno -2] Name or service not known',)': /simple/sasl/
Collecting sasl
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Requirement already satisfied: six in /usr/local/python3/lib/python3.6/site-packages (from sasl) (1.15.0)
Using legacy 'setup.py install' for sasl, since package 'wheel' is not installed.
Installing collected packages: sasl
Running setup.py install for sasl ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-qmms573z/sasl/setup.py'"'"'; __file__='" '"'/tmp/pip-install-qmms573z/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();ex ec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-l3ks3dxm/install-record.txt --single-version-externally-managed --compile --install-he aders /usr/local/python3/include/python3.6m/sasl
cwd: /tmp/pip-install-qmms573z/sasl/
Complete output (25 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.6
creating build/lib.linux-x86_64-3.6/sasl
copying sasl/__init__.py -> build/lib.linux-x86_64-3.6/sasl
running egg_info
writing sasl.egg-info/PKG-INFO
writing dependency_links to sasl.egg-info/dependency_links.txt
writing requirements to sasl.egg-info/requires.txt
writing top-level names to sasl.egg-info/top_level.txt
reading manifest file 'sasl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'sasl.egg-info/SOURCES.txt'
copying sasl/saslwrapper.cpp -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.h -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.pyx -> build/lib.linux-x86_64-3.6/sasl
running build_ext
building 'sasl.saslwrapper' extension
creating build/temp.linux-x86_64-3.6
creating build/temp.linux-x86_64-3.6/sasl
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Isasl -I/usr/local/python3/include/python3.6m -c sasl/sa slwrapper.cpp -o build/temp.linux-x86_64-3.6/sasl/saslwrapper.o
gcc: error trying to exec 'cc1plus': execvp: No such file or directory
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-qmms573 z/sasl/setup.py'"'"'; __file__='"'"'/tmp/pip-install-qmms573z/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n '"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-l3ks3dxm/install-record.txt --single-version-external ly-managed --compile --install-headers /usr/local/python3/include/python3.6m/sasl Check the logs for full command output.
[root@localhost pyhive]# yum -y install gcc
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos error was
12: Timeout on https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos: (28, 'Operation timed out after 30001 milliseconds wit h 0 out of 0 bytes received')
^C
Exiting on user cancel
[root@localhost pyhive]# mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
[root@localhost pyhive]# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2523 100 2523 0 0 8226 0 --:--:-- --:--:-- --:--:-- 8245
[root@localhost pyhive]# yum install python-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos error was
14: curl#6 - "Could not resolve host: mirrors.fedoraproject.org; Unknown error"
* base: mirrors.aliyun.com
* epel: hkg.mirror.rackspace.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package python-devel.x86_64 0:2.7.5-89.el7 will be installed
--> Processing Dependency: python(x86-64) = 2.7.5-89.el7 for package: python-devel-2.7.5-89.el7.x86_64
--> Processing Dependency: python2-rpm-macros > 3-30 for package: python-devel-2.7.5-89.el7.x86_64
--> Processing Dependency: python-rpm-macros > 3-30 for package: python-devel-2.7.5-89.el7.x86_64
--> Running transaction check
---> Package python.x86_64 0:2.7.5-88.el7 will be updated
---> Package python.x86_64 0:2.7.5-89.el7 will be an update
--> Processing Dependency: python-libs(x86-64) = 2.7.5-89.el7 for package: python-2.7.5-89.el7.x86_64
---> Package python-rpm-macros.noarch 0:3-34.el7 will be installed
--> Processing Dependency: python-srpm-macros for package: python-rpm-macros-3-34.el7.noarch
---> Package python2-rpm-macros.noarch 0:3-34.el7 will be installed
--> Running transaction check
---> Package python-libs.x86_64 0:2.7.5-88.el7 will be updated
---> Package python-libs.x86_64 0:2.7.5-89.el7 will be an update
---> Package python-srpm-macros.noarch 0:3-34.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
python-devel x86_64 2.7.5-89.el7 base 398 k
Installing for dependencies:
python-rpm-macros noarch 3-34.el7 base 9.1 k
python-srpm-macros noarch 3-34.el7 base 8.8 k
python2-rpm-macros noarch 3-34.el7 base 8.1 k
Updating for dependencies:
python x86_64 2.7.5-89.el7 base 96 k
python-libs x86_64 2.7.5-89.el7 base 5.6 M
Transaction Summary
====================================================================================================================================================================
Install 1 Package (+3 Dependent packages)
Upgrade ( 2 Dependent packages)
Total download size: 6.2 M
Is this ok [y/d/N]: y
Is this ok [y/d/N]: y
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
(1/6): python-2.7.5-89.el7.x86_64.rpm | 96 kB 00:00:00
(2/6): python-devel-2.7.5-89.el7.x86_64.rpm | 398 kB 00:00:02
(3/6): python-rpm-macros-3-34.el7.noarch.rpm | 9.1 kB 00:00:00
(4/6): python-srpm-macros-3-34.el7.noarch.rpm | 8.8 kB 00:00:00
(5/6): python2-rpm-macros-3-34.el7.noarch.rpm | 8.1 kB 00:00:00
(6/6): python-libs-2.7.5-89.el7.x86_64.rpm | 5.6 MB 00:00:21
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 284 kB/s | 6.2 MB 00:00:22
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : python-libs-2.7.5-89.el7.x86_64 1/8
Updating : python-2.7.5-89.el7.x86_64 2/8
Installing : python-srpm-macros-3-34.el7.noarch 3/8
Installing : python-rpm-macros-3-34.el7.noarch 4/8
Installing : python2-rpm-macros-3-34.el7.noarch 5/8
Installing : python-devel-2.7.5-89.el7.x86_64 6/8
Cleanup : python-2.7.5-88.el7.x86_64 7/8
Cleanup : python-libs-2.7.5-88.el7.x86_64 8/8
Verifying : python2-rpm-macros-3-34.el7.noarch 1/8
Verifying : python-rpm-macros-3-34.el7.noarch 2/8
Verifying : python-devel-2.7.5-89.el7.x86_64 3/8
Verifying : python-srpm-macros-3-34.el7.noarch 4/8
Verifying : python-libs-2.7.5-89.el7.x86_64 5/8
Verifying : python-2.7.5-89.el7.x86_64 6/8
Verifying : python-2.7.5-88.el7.x86_64 7/8
Verifying : python-libs-2.7.5-88.el7.x86_64 8/8
Installed:
python-devel.x86_64 0:2.7.5-89.el7
Dependency Installed:
python-rpm-macros.noarch 0:3-34.el7 python-srpm-macros.noarch 0:3-34.el7 python2-rpm-macros.noarch 0:3-34.el7
Dependency Updated:
python.x86_64 0:2.7.5-89.el7 python-libs.x86_64 0:2.7.5-89.el7
Complete!
[root@localhost pyhive]# yum install gcc libffi-devel python-devel openssl-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package gcc-4.8.5-44.el7.x86_64 already installed and latest version
Package python-devel-2.7.5-89.el7.x86_64 already installed and latest version
Package 1:openssl-devel-1.0.2k-19.el7.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package libffi-devel.x86_64 0:3.0.13-19.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
libffi-devel x86_64 3.0.13-19.el7 base 23 k
Transaction Summary
====================================================================================================================================================================
Install 1 Package
Total download size: 23 k
Installed size: 27 k
Is this ok [y/d/N]: y
Is this ok [y/d/N]: y
Downloading packages:
libffi-devel-3.0.13-19.el7.x86_64.rpm | 23 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : libffi-devel-3.0.13-19.el7.x86_64 1/1
Verifying : libffi-devel-3.0.13-19.el7.x86_64 1/1
Installed:
libffi-devel.x86_64 0:3.0.13-19.el7
Complete!
[root@localhost pyhive]# yum install -y libffi-devel python-devel openssl-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package libffi-devel-3.0.13-19.el7.x86_64 already installed and latest version
Package python-devel-2.7.5-89.el7.x86_64 already installed and latest version
Package 1:openssl-devel-1.0.2k-19.el7.x86_64 already installed and latest version
Nothing to do
[root@localhost pyhive]# pip3 install sasl
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting sasl
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Requirement already satisfied: six in /usr/local/python3/lib/python3.6/site-packages (from sasl) (1.15.0)
Using legacy 'setup.py install' for sasl, since package 'wheel' is not installed.
Installing collected packages: sasl
Running setup.py install for sasl ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-khsp88sq/sasl/setup.py'"'"'; __file__='" '"'/tmp/pip-install-khsp88sq/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();ex ec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-1edzncl3/install-record.txt --single-version-externally-managed --compile --install-he aders /usr/local/python3/include/python3.6m/sasl
cwd: /tmp/pip-install-khsp88sq/sasl/
Complete output (25 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.6
creating build/lib.linux-x86_64-3.6/sasl
copying sasl/__init__.py -> build/lib.linux-x86_64-3.6/sasl
running egg_info
writing sasl.egg-info/PKG-INFO
writing dependency_links to sasl.egg-info/dependency_links.txt
writing requirements to sasl.egg-info/requires.txt
writing top-level names to sasl.egg-info/top_level.txt
reading manifest file 'sasl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'sasl.egg-info/SOURCES.txt'
copying sasl/saslwrapper.cpp -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.h -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.pyx -> build/lib.linux-x86_64-3.6/sasl
running build_ext
building 'sasl.saslwrapper' extension
creating build/temp.linux-x86_64-3.6
creating build/temp.linux-x86_64-3.6/sasl
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Isasl -I/usr/local/python3/include/python3.6m -c sasl/sa slwrapper.cpp -o build/temp.linux-x86_64-3.6/sasl/saslwrapper.o
gcc: error trying to exec 'cc1plus': execvp: No such file or directory
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-khsp88s q/sasl/setup.py'"'"'; __file__='"'"'/tmp/pip-install-khsp88sq/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n '"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-1edzncl3/install-record.txt --single-version-external ly-managed --compile --install-headers /usr/local/python3/include/python3.6m/sasl Check the logs for full command output.
[root@localhost pyhive]# yum install cc1plus
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: hkg.mirror.rackspace.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
No package cc1plus available.
Error: Nothing to do
[root@localhost pyhive]# yum install gcc-c++</span>
-bash: syntax error near unexpected token `newline'
[root@localhost pyhive]# yum install gcc-c++
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.x86_64 0:4.8.5-44.el7 will be installed
--> Processing Dependency: libstdc++-devel = 4.8.5-44.el7 for package: gcc-c++-4.8.5-44.el7.x86_64
--> Processing Dependency: libstdc++ = 4.8.5-44.el7 for package: gcc-c++-4.8.5-44.el7.x86_64
--> Running transaction check
---> Package libstdc++.x86_64 0:4.8.5-39.el7 will be updated
---> Package libstdc++.x86_64 0:4.8.5-44.el7 will be an update
---> Package libstdc++-devel.x86_64 0:4.8.5-44.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
gcc-c++ x86_64 4.8.5-44.el7 base 7.2 M
Installing for dependencies:
libstdc++-devel x86_64 4.8.5-44.el7 base 1.5 M
Updating for dependencies:
libstdc++ x86_64 4.8.5-44.el7 base 306 k
Transaction Summary
====================================================================================================================================================================
Install 1 Package (+1 Dependent package)
Upgrade ( 1 Dependent package)
Total download size: 9.0 M
Is this ok [y/d/N]: y
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
(1/3): libstdc++-4.8.5-44.el7.x86_64.rpm | 306 kB 00:00:00
(2/3): libstdc++-devel-4.8.5-44.el7.x86_64.rpm | 1.5 MB 00:00:04
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyun.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#6 - "Could not resolve host: mirrors.aliyun.com; Unknown error"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connect ion refused"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.cloud.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#6 - "Could not resolve host: mirrors.cloud.aliyun cs.com; Unknown error"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connect ion refused"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connect ion refused"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connect ion refused"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connect ion refused"
Trying other mirror.
gcc-c++-4.8.5-44.el7.x86_64.rp FAILED
http://mirrors.aliyuncs.com/centos/7/os/x86_64/Packages/gcc-c%2B%2B-4.8.5-44.el7.x86_64.rpm: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connect ion refused"
Trying other mirror.
Error downloading packages:
gcc-c++-4.8.5-44.el7.x86_64: [Errno 256] No more mirrors to try.
[root@localhost pyhive]# yum install gcc-c++ -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.x86_64 0:4.8.5-44.el7 will be installed
--> Processing Dependency: libstdc++-devel = 4.8.5-44.el7 for package: gcc-c++-4.8.5-44.el7.x86_64
--> Processing Dependency: libstdc++ = 4.8.5-44.el7 for package: gcc-c++-4.8.5-44.el7.x86_64
--> Running transaction check
---> Package libstdc++.x86_64 0:4.8.5-39.el7 will be updated
---> Package libstdc++.x86_64 0:4.8.5-44.el7 will be an update
---> Package libstdc++-devel.x86_64 0:4.8.5-44.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
gcc-c++ x86_64 4.8.5-44.el7 base 7.2 M
Installing for dependencies:
libstdc++-devel x86_64 4.8.5-44.el7 base 1.5 M
Updating for dependencies:
libstdc++ x86_64 4.8.5-44.el7 base 306 k
Transaction Summary
====================================================================================================================================================================
Install 1 Package (+1 Dependent package)
Upgrade ( 1 Dependent package)
Total size: 9.0 M
Total download size: 7.2 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
gcc-c++-4.8.5-44.el7.x86_64.rpm | 7.2 MB 00:00:14
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : libstdc++-4.8.5-44.el7.x86_64 1/4
Installing : libstdc++-devel-4.8.5-44.el7.x86_64 2/4
Installing : gcc-c++-4.8.5-44.el7.x86_64 3/4
Cleanup : libstdc++-4.8.5-39.el7.x86_64 4/4
Verifying : libstdc++-4.8.5-44.el7.x86_64 1/4
Verifying : gcc-c++-4.8.5-44.el7.x86_64 2/4
Verifying : libstdc++-devel-4.8.5-44.el7.x86_64 3/4
Verifying : libstdc++-4.8.5-39.el7.x86_64 4/4
Installed:
gcc-c++.x86_64 0:4.8.5-44.el7
Dependency Installed:
libstdc++-devel.x86_64 0:4.8.5-44.el7
Dependency Updated:
libstdc++.x86_64 0:4.8.5-44.el7
Complete!
[root@localhost pyhive]# yum install gcc-c++ -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: my.mirrors.thegigabit.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package gcc-c++-4.8.5-44.el7.x86_64 already installed and latest version
Nothing to do
[root@localhost pyhive]# pip3 install sasl
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting sasl
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Requirement already satisfied: six in /usr/local/python3/lib/python3.6/site-packages (from sasl) (1.15.0)
Using legacy 'setup.py install' for sasl, since package 'wheel' is not installed.
Installing collected packages: sasl
Running setup.py install for sasl ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-zpqohl9f/sasl/setup.py'"'"'; __file__='" '"'/tmp/pip-install-zpqohl9f/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();ex ec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-qg0ogorh/install-record.txt --single-version-externally-managed --compile --install-he aders /usr/local/python3/include/python3.6m/sasl
cwd: /tmp/pip-install-zpqohl9f/sasl/
Complete output (30 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.6
creating build/lib.linux-x86_64-3.6/sasl
copying sasl/__init__.py -> build/lib.linux-x86_64-3.6/sasl
running egg_info
writing sasl.egg-info/PKG-INFO
writing dependency_links to sasl.egg-info/dependency_links.txt
writing requirements to sasl.egg-info/requires.txt
writing top-level names to sasl.egg-info/top_level.txt
reading manifest file 'sasl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'sasl.egg-info/SOURCES.txt'
copying sasl/saslwrapper.cpp -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.h -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.pyx -> build/lib.linux-x86_64-3.6/sasl
running build_ext
building 'sasl.saslwrapper' extension
creating build/temp.linux-x86_64-3.6
creating build/temp.linux-x86_64-3.6/sasl
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Isasl -I/usr/local/python3/include/python3.6m -c sasl/sa slwrapper.cpp -o build/temp.linux-x86_64-3.6/sasl/saslwrapper.o
cc1plus: warning: command line option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [enabled by default]
In file included from sasl/saslwrapper.cpp:254:0:
sasl/saslwrapper.h:22:23: fatal error: sasl/sasl.h: No such file or directory
#include <sasl/sasl.h>
^
compilation terminated.
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-zpqohl9 f/sasl/setup.py'"'"'; __file__='"'"'/tmp/pip-install-zpqohl9f/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n '"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-qg0ogorh/install-record.txt --single-version-external ly-managed --compile --install-headers /usr/local/python3/include/python3.6m/sasl Check the logs for full command output.
[root@localhost pyhive]# yum -y install python3-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos error was
12: Timeout on https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos: (28, 'Operation too slow. Less than 1000 bytes/sec tra nsferred the last 30 seconds')
^C
Exiting on user cancel
[root@localhost pyhive]# yum -y install python3-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: hkg.mirror.rackspace.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
http://mirrors.aliyun.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.aliyun.com; Unknown error"
Trying other mirror.
http://mirrors.cloud.aliyuncs.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.cloud.aliyuncs.com; Unknown error"
Trying other mirror.
^Chttp://mirrors.aliyuncs.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#56 - "Callback aborted"
Trying other mirror.
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package python3-devel.x86_64 0:3.6.8-17.el7 will be installed
--> Processing Dependency: python3-libs(x86-64) = 3.6.8-17.el7 for package: python3-devel-3.6.8-17.el7.x86_64
--> Processing Dependency: python3 = 3.6.8-17.el7 for package: python3-devel-3.6.8-17.el7.x86_64
--> Processing Dependency: python(abi) = 3.6 for package: python3-devel-3.6.8-17.el7.x86_64
--> Processing Dependency: redhat-rpm-config for package: python3-devel-3.6.8-17.el7.x86_64
--> Processing Dependency: python3-rpm-macros for package: python3-devel-3.6.8-17.el7.x86_64
--> Processing Dependency: python3-rpm-generators for package: python3-devel-3.6.8-17.el7.x86_64
--> Processing Dependency: libpython3.6m.so.1.0()(64bit) for package: python3-devel-3.6.8-17.el7.x86_64
--> Running transaction check
---> Package python3.x86_64 0:3.6.8-17.el7 will be installed
--> Processing Dependency: python3-setuptools for package: python3-3.6.8-17.el7.x86_64
--> Processing Dependency: python3-pip for package: python3-3.6.8-17.el7.x86_64
---> Package python3-libs.x86_64 0:3.6.8-17.el7 will be installed
--> Processing Dependency: libtirpc.so.1()(64bit) for package: python3-libs-3.6.8-17.el7.x86_64
---> Package python3-rpm-generators.noarch 0:6-2.el7 will be installed
---> Package python3-rpm-macros.noarch 0:3-34.el7 will be installed
---> Package redhat-rpm-config.noarch 0:9.1.0-88.el7.centos will be installed
--> Processing Dependency: dwz >= 0.4 for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Processing Dependency: zip for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Processing Dependency: perl-srpm-macros for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Running transaction check
---> Package dwz.x86_64 0:0.11-3.el7 will be installed
---> Package libtirpc.x86_64 0:0.2.4-0.16.el7 will be installed
---> Package perl-srpm-macros.noarch 0:1-8.el7 will be installed
---> Package python3-pip.noarch 0:9.0.3-8.el7 will be installed
---> Package python3-setuptools.noarch 0:39.2.0-10.el7 will be installed
---> Package zip.x86_64 0:3.0-11.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
python3-devel x86_64 3.6.8-17.el7 base 217 k
Installing for dependencies:
dwz x86_64 0.11-3.el7 base 99 k
libtirpc x86_64 0.2.4-0.16.el7 base 89 k
perl-srpm-macros noarch 1-8.el7 base 4.6 k
python3 x86_64 3.6.8-17.el7 base 70 k
python3-libs x86_64 3.6.8-17.el7 base 6.9 M
python3-pip noarch 9.0.3-8.el7 base 1.6 M
python3-rpm-generators noarch 6-2.el7 base 20 k
python3-rpm-macros noarch 3-34.el7 base 8.1 k
python3-setuptools noarch 39.2.0-10.el7 base 629 k
redhat-rpm-config noarch 9.1.0-88.el7.centos base 81 k
zip x86_64 3.0-11.el7 base 260 k
Transaction Summary
====================================================================================================================================================================
Install 1 Package (+11 Dependent packages)
Total download size: 10 M
Installed size: 49 M
Downloading packages:
(1/12): libtirpc-0.2.4-0.16.el7.x86_64.rpm | 89 kB 00:00:03
(2/12): dwz-0.11-3.el7.x86_64.rpm | 99 kB 00:00:04
(3/12): python3-3.6.8-17.el7.x86_64.rpm | 70 kB 00:00:00
(4/12): perl-srpm-macros-1-8.el7.noarch.rpm | 4.6 kB 00:00:02
(5/12): python3-devel-3.6.8-17.el7.x86_64.rpm | 217 kB 00:00:08
(6/12): python3-pip-9.0.3-8.el7.noarch.rpm | 1.6 MB 00:00:15
(7/12): python3-rpm-generators-6-2.el7.noarch.rpm | 20 kB 00:00:00
(8/12): python3-rpm-macros-3-34.el7.noarch.rpm | 8.1 kB 00:00:00
(9/12): python3-setuptools-39.2.0-10.el7.noarch.rpm | 629 kB 00:00:01
(10/12): redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm | 81 kB 00:00:00
(11/12): zip-3.0-11.el7.x86_64.rpm | 260 kB 00:00:00
(12/12): python3-libs-3.6.8-17.el7.x86_64.rpm | 6.9 MB 00:00:34
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 253 kB/s | 10 MB 00:00:40
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python3-rpm-macros-3-34.el7.noarch 1/12
Installing : dwz-0.11-3.el7.x86_64 2/12
Installing : zip-3.0-11.el7.x86_64 3/12
Installing : perl-srpm-macros-1-8.el7.noarch 4/12
Installing : redhat-rpm-config-9.1.0-88.el7.centos.noarch 5/12
Installing : libtirpc-0.2.4-0.16.el7.x86_64 6/12
Installing : python3-setuptools-39.2.0-10.el7.noarch 7/12
Installing : python3-pip-9.0.3-8.el7.noarch 8/12
Installing : python3-3.6.8-17.el7.x86_64 9/12
Installing : python3-libs-3.6.8-17.el7.x86_64 10/12
Installing : python3-rpm-generators-6-2.el7.noarch 11/12
Installing : python3-devel-3.6.8-17.el7.x86_64 12/12
Verifying : libtirpc-0.2.4-0.16.el7.x86_64 1/12
Verifying : python3-rpm-generators-6-2.el7.noarch 2/12
Verifying : perl-srpm-macros-1-8.el7.noarch 3/12
Verifying : python3-libs-3.6.8-17.el7.x86_64 4/12
Verifying : zip-3.0-11.el7.x86_64 5/12
Verifying : python3-devel-3.6.8-17.el7.x86_64 6/12
Verifying : dwz-0.11-3.el7.x86_64 7/12
Verifying : python3-rpm-macros-3-34.el7.noarch 8/12
Verifying : python3-setuptools-39.2.0-10.el7.noarch 9/12
Verifying : python3-pip-9.0.3-8.el7.noarch 10/12
Verifying : python3-3.6.8-17.el7.x86_64 11/12
Verifying : redhat-rpm-config-9.1.0-88.el7.centos.noarch 12/12
Installed:
python3-devel.x86_64 0:3.6.8-17.el7
Dependency Installed:
dwz.x86_64 0:0.11-3.el7 libtirpc.x86_64 0:0.2.4-0.16.el7 perl-srpm-macros.noarch 0:1-8.el7
python3.x86_64 0:3.6.8-17.el7 python3-libs.x86_64 0:3.6.8-17.el7 python3-pip.noarch 0:9.0.3-8.el7
python3-rpm-generators.noarch 0:6-2.el7 python3-rpm-macros.noarch 0:3-34.el7 python3-setuptools.noarch 0:39.2.0-10.el7
redhat-rpm-config.noarch 0:9.1.0-88.el7.centos zip.x86_64 0:3.0-11.el7
Complete!
[root@localhost pyhive]# pip3 install sasl
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting sasl
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Requirement already satisfied: six in /usr/local/python3/lib/python3.6/site-packages (from sasl) (1.15.0)
Using legacy 'setup.py install' for sasl, since package 'wheel' is not installed.
Installing collected packages: sasl
Running setup.py install for sasl ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-7jjew3r4/sasl/setup.py'"'"'; __file__='" '"'/tmp/pip-install-7jjew3r4/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();ex ec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-e14150ee/install-record.txt --single-version-externally-managed --compile --install-he aders /usr/local/python3/include/python3.6m/sasl
cwd: /tmp/pip-install-7jjew3r4/sasl/
Complete output (30 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.6
creating build/lib.linux-x86_64-3.6/sasl
copying sasl/__init__.py -> build/lib.linux-x86_64-3.6/sasl
running egg_info
writing sasl.egg-info/PKG-INFO
writing dependency_links to sasl.egg-info/dependency_links.txt
writing requirements to sasl.egg-info/requires.txt
writing top-level names to sasl.egg-info/top_level.txt
reading manifest file 'sasl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'sasl.egg-info/SOURCES.txt'
copying sasl/saslwrapper.cpp -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.h -> build/lib.linux-x86_64-3.6/sasl
copying sasl/saslwrapper.pyx -> build/lib.linux-x86_64-3.6/sasl
running build_ext
building 'sasl.saslwrapper' extension
creating build/temp.linux-x86_64-3.6
creating build/temp.linux-x86_64-3.6/sasl
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Isasl -I/usr/local/python3/include/python3.6m -c sasl/sa slwrapper.cpp -o build/temp.linux-x86_64-3.6/sasl/saslwrapper.o
cc1plus: warning: command line option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++ [enabled by default]
In file included from sasl/saslwrapper.cpp:254:0:
sasl/saslwrapper.h:22:23: fatal error: sasl/sasl.h: No such file or directory
#include <sasl/sasl.h>
^
compilation terminated.
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-7jjew3r 4/sasl/setup.py'"'"'; __file__='"'"'/tmp/pip-install-7jjew3r4/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n '"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-e14150ee/install-record.txt --single-version-external ly-managed --compile --install-headers /usr/local/python3/include/python3.6m/sasl Check the logs for full command output.
[root@localhost pyhive]#
[root@localhost pyhive]# yum -y install cyrus-sasl cyrus-sasl-devel cyrus-sasl-lib
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package cyrus-sasl-lib-2.1.26-23.el7.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package cyrus-sasl.x86_64 0:2.1.26-23.el7 will be installed
---> Package cyrus-sasl-devel.x86_64 0:2.1.26-23.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
cyrus-sasl x86_64 2.1.26-23.el7 base 88 k
cyrus-sasl-devel x86_64 2.1.26-23.el7 base 310 k
Transaction Summary
====================================================================================================================================================================
Install 2 Packages
Total download size: 398 k
Installed size: 1.1 M
Downloading packages:
(1/2): cyrus-sasl-2.1.26-23.el7.x86_64.rpm | 88 kB 00:00:00
(2/2): cyrus-sasl-devel-2.1.26-23.el7.x86_64.rpm | 310 kB 00:00:00
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 1.3 MB/s | 398 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : cyrus-sasl-2.1.26-23.el7.x86_64 1/2
Installing : cyrus-sasl-devel-2.1.26-23.el7.x86_64 2/2
Verifying : cyrus-sasl-devel-2.1.26-23.el7.x86_64 1/2
Verifying : cyrus-sasl-2.1.26-23.el7.x86_64 2/2
Installed:
cyrus-sasl.x86_64 0:2.1.26-23.el7 cyrus-sasl-devel.x86_64 0:2.1.26-23.el7
Complete!
[root@localhost pyhive]# pip3 install sasl
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting sasl
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Requirement already satisfied: six in /usr/local/python3/lib/python3.6/site-packages (from sasl) (1.15.0)
Using legacy 'setup.py install' for sasl, since package 'wheel' is not installed.
Installing collected packages: sasl
Running setup.py install for sasl ... done
Successfully installed sasl-0.2.1
[root@localhost pyhive]# pip3 install thrift_sasl
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting thrift_sasl
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/73/d3/588654faef5511afadc1a091d32fcdbb24ae5f2d90b380874aee68a717f9/thrift_sasl-0.4.2.tar.gz (3.9 kB)
Requirement already satisfied: thrift>=0.10.0 in /usr/local/python3/lib/python3.6/site-packages (from thrift_sasl) (0.13.0)
Requirement already satisfied: sasl>=0.2.1 in /usr/local/python3/lib/python3.6/site-packages (from thrift_sasl) (0.2.1)
Requirement already satisfied: six>=1.13.0 in /usr/local/python3/lib/python3.6/site-packages (from thrift_sasl) (1.15.0)
Using legacy 'setup.py install' for thrift-sasl, since package 'wheel' is not installed.
Installing collected packages: thrift-sasl
Running setup.py install for thrift-sasl ... done
Successfully installed thrift-sasl-0.4.2
[root@localhost pyhive]# ls
future-0.18.2.tar.gz PyHive-0.6.3.tar.gz python_dateutil-2.8.1-py2.py3-none-any.whl requirements.txt six-1.15.0-py2.py3-none-any.whl thrift-0.13.0.tar.gz
[root@localhost pyhive]# pip3 freeze > requirements.txt
[root@localhost pyhive]# pip3 download -d /soft/pyhive -r requirements.txt
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting future==0.18.2
File was already downloaded /soft/pyhive/future-0.18.2.tar.gz
Collecting PyHive==0.6.3
File was already downloaded /soft/pyhive/PyHive-0.6.3.tar.gz
Collecting python-dateutil==2.8.1
File was already downloaded /soft/pyhive/python_dateutil-2.8.1-py2.py3-none-any.whl
Collecting sasl==0.2.1
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Saved ./sasl-0.2.1.tar.gz
Collecting six==1.15.0
File was already downloaded /soft/pyhive/six-1.15.0-py2.py3-none-any.whl
Collecting thrift==0.13.0
File was already downloaded /soft/pyhive/thrift-0.13.0.tar.gz
Collecting thrift-sasl==0.4.2
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/73/d3/588654faef5511afadc1a091d32fcdbb24ae5f2d90b380874aee68a717f9/thrift_sasl-0.4.2.tar.gz (3.9 kB)
Saved ./thrift_sasl-0.4.2.tar.gz
Successfully downloaded future PyHive python-dateutil sasl six thrift thrift-sasl
[root@localhost pyhive]# pip3 wheel -w /soft/pyhive -r requirements.txt
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Collecting future==0.18.2
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/45/0b/38b06fd9b92dc2b68d58b75f900e97884c45bedd2ff83203d933cf5851c9/future-0.18.2.tar.gz (829 kB)
|████████████████████████████████| 829 kB 72 kB/s
Collecting PyHive==0.6.3
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/f8/f3/666dd810fa88c3cb9fea2c39817242036dee963ff62291f7c0f8fe34a8e1/PyHive-0.6.3.tar.gz (41 kB)
|████████████████████████████████| 41 kB 1.3 MB/s
Collecting python-dateutil==2.8.1
File was already downloaded /soft/pyhive/python_dateutil-2.8.1-py2.py3-none-any.whl
Collecting sasl==0.2.1
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/8e/2c/45dae93d666aea8492678499e0999269b4e55f1829b1e4de5b8204706ad9/sasl-0.2.1.tar.gz (30 kB)
Collecting six==1.15.0
File was already downloaded /soft/pyhive/six-1.15.0-py2.py3-none-any.whl
Collecting thrift==0.13.0
Downloading https://pypi.tuna.tsinghua.edu.cn/packages/97/1e/3284d19d7be99305eda145b8aa46b0c33244e4a496ec66440dac19f8274d/thrift-0.13.0.tar.gz (59 kB)
|████████████████████████████████| 59 kB 4.0 MB/s
Collecting thrift-sasl==0.4.2
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/73/d3/588654faef5511afadc1a091d32fcdbb24ae5f2d90b380874aee68a717f9/thrift_sasl-0.4.2.tar.gz (3.9 kB)
Skipping python-dateutil, due to already being wheel.
Skipping six, due to already being wheel.
Building wheels for collected packages: future, PyHive, sasl, thrift, thrift-sasl
Building wheel for future (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-x564lzqj/future/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-x564lzqj/future/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-3s0le6a4
cwd: /tmp/pip-wheel-x564lzqj/future/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for future
Running setup.py clean for future
Building wheel for PyHive (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-x564lzqj/pyhive/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-x564lzqj/pyhive/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-efndgh9m
cwd: /tmp/pip-wheel-x564lzqj/pyhive/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for PyHive
Running setup.py clean for PyHive
Building wheel for sasl (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-x564lzqj/sasl/setup.py'"'"'; __file__='"'"'/ tmp/pip-wheel-x564lzqj/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(com pile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-y268m11w
cwd: /tmp/pip-wheel-x564lzqj/sasl/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for sasl
Running setup.py clean for sasl
Building wheel for thrift (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-x564lzqj/thrift/setup.py'"'"'; __file__='"'" '/tmp/pip-wheel-x564lzqj/thrift/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec (compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-760kiyvr
cwd: /tmp/pip-wheel-x564lzqj/thrift/
Complete output (8 lines):
/usr/local/python3/lib/python3.6/distutils/dist.py:261: UserWarning: Unknown distribution option: 'long_description_content_type'
warnings.warn(msg)
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for thrift
Running setup.py clean for thrift
Building wheel for thrift-sasl (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/python3/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-wheel-x564lzqj/thrift-sasl/setup.py'"'"'; __file__ ='"'"'/tmp/pip-wheel-x564lzqj/thrift-sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.cl ose();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-s4pzdnhj
cwd: /tmp/pip-wheel-x564lzqj/thrift-sasl/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for thrift-sasl
Running setup.py clean for thrift-sasl
Failed to build future PyHive sasl thrift thrift-sasl
ERROR: Failed to build one or more wheels
[root@localhost pyhive]# ls
future-0.18.2.tar.gz python_dateutil-2.8.1-py2.py3-none-any.whl sasl-0.2.1.tar.gz thrift-0.13.0.tar.gz
PyHive-0.6.3.tar.gz requirements.txt six-1.15.0-py2.py3-none-any.whl thrift_sasl-0.4.2.tar.gz
[root@localhost pyhive]# cat requirements.txt
future==0.18.2
PyHive==0.6.3
python-dateutil==2.8.1
sasl==0.2.1
six==1.15.0
thrift==0.13.0
thrift-sasl==0.4.2
[root@localhost pyhive]# ls
future-0.18.2.tar.gz python_dateutil-2.8.1-py2.py3-none-any.whl sasl-0.2.1.tar.gz thrift-0.13.0.tar.gz
PyHive-0.6.3.tar.gz requirements.txt six-1.15.0-py2.py3-none-any.whl thrift_sasl-0.4.2.tar.gz
[root@localhost pyhive]# cd ..
[root@localhost soft]# ls
base epel extras pyhive timedhosts timedhosts.txt updates
[root@localhost soft]# cd base/packages/
[root@localhost packages]# ls
bzip2-devel-1.0.6-13.el7.x86_64.rpm libsepol-devel-2.5-10.el7.x86_64.rpm perl-Pod-Usage-1.63-3.el7.noarch.rpm
cpp-4.8.5-44.el7.x86_64.rpm libsmartcols-2.23.2-65.el7.x86_64.rpm perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
cyrus-sasl-2.1.26-23.el7.x86_64.rpm libss-1.42.9-19.el7.x86_64.rpm perl-Socket-2.010-5.el7.x86_64.rpm
cyrus-sasl-devel-2.1.26-23.el7.x86_64.rpm libstdc++-4.8.5-44.el7.x86_64.rpm perl-srpm-macros-1-8.el7.noarch.rpm
dejavu-fonts-common-2.33-6.el7.noarch.rpm libstdc++-devel-4.8.5-44.el7.x86_64.rpm perl-Storable-2.45-3.el7.x86_64.rpm
dejavu-sans-fonts-2.33-6.el7.noarch.rpm libtirpc-0.2.4-0.16.el7.x86_64.rpm perl-Text-ParseWords-3.29-4.el7.noarch.rpm
dwz-0.11-3.el7.x86_64.rpm libuuid-2.23.2-65.el7.x86_64.rpm perl-threads-1.87-4.el7.x86_64.rpm
e2fsprogs-1.42.9-19.el7.x86_64.rpm libuuid-devel-2.23.2-65.el7.x86_64.rpm perl-threads-shared-1.43-6.el7.x86_64.rpm
e2fsprogs-libs-1.42.9-19.el7.x86_64.rpm libverto-devel-0.2.5-4.el7.x86_64.rpm perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
expat-2.1.0-12.el7.x86_64.rpm libXau-1.0.8-2.1.el7.x86_64.rpm perl-Time-Local-1.2300-2.el7.noarch.rpm
expat-devel-2.1.0-12.el7.x86_64.rpm libXau-devel-1.0.8-2.1.el7.x86_64.rpm python-2.7.5-89.el7.x86_64.rpm
fontconfig-2.13.0-4.3.el7.x86_64.rpm libxcb-1.13-1.el7.x86_64.rpm python2-rpm-macros-3-34.el7.noarch.rpm
fontconfig-devel-2.13.0-4.3.el7.x86_64.rpm libxcb-devel-1.13-1.el7.x86_64.rpm python3-3.6.8-17.el7.x86_64.rpm
fontpackages-filesystem-1.44-8.el7.noarch.rpm libXft-2.3.2-2.el7.x86_64.rpm python3-devel-3.6.8-17.el7.x86_64.rpm
gcc-4.8.5-44.el7.x86_64.rpm libXft-devel-2.3.2-2.el7.x86_64.rpm python3-libs-3.6.8-17.el7.x86_64.rpm
gcc-c++-4.8.5-44.el7.x86_64.rpm libXrender-0.9.10-1.el7.x86_64.rpm python3-pip-9.0.3-8.el7.noarch.rpm
gdbm-devel-1.10-8.el7.x86_64.rpm libXrender-devel-0.9.10-1.el7.x86_64.rpm python3-rpm-generators-6-2.el7.noarch.rpm
glibc-2.17-317.el7.x86_64.rpm mpfr-3.1.1-4.el7.x86_64.rpm python3-rpm-macros-3-34.el7.noarch.rpm
glibc-common-2.17-317.el7.x86_64.rpm ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm python3-setuptools-39.2.0-10.el7.noarch.rpm
glibc-devel-2.17-317.el7.x86_64.rpm openssl-devel-1.0.2k-19.el7.x86_64.rpm python-devel-2.7.5-89.el7.x86_64.rpm
glibc-headers-2.17-317.el7.x86_64.rpm pcre-devel-8.32-17.el7.x86_64.rpm python-libs-2.7.5-89.el7.x86_64.rpm
gpm-libs-1.20.7-6.el7.x86_64.rpm perl-5.16.3-297.el7.x86_64.rpm python-rpm-macros-3-34.el7.noarch.rpm
keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm perl-Carp-1.26-244.el7.noarch.rpm python-srpm-macros-3-34.el7.noarch.rpm
krb5-devel-1.15.1-50.el7.x86_64.rpm perl-constant-1.27-2.el7.noarch.rpm readline-devel-6.2-11.el7.x86_64.rpm
krb5-libs-1.15.1-50.el7.x86_64.rpm perl-Encode-2.51-7.el7.x86_64.rpm redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm
libblkid-2.23.2-65.el7.x86_64.rpm perl-Exporter-5.68-3.el7.noarch.rpm sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
libcom_err-1.42.9-19.el7.x86_64.rpm perl-File-Path-2.09-2.el7.noarch.rpm tcl-8.5.13-8.el7.x86_64.rpm
libcom_err-devel-1.42.9-19.el7.x86_64.rpm perl-File-Temp-0.23.01-3.el7.noarch.rpm tcl-devel-8.5.13-8.el7.x86_64.rpm
libffi-devel-3.0.13-19.el7.x86_64.rpm perl-Filter-1.49-3.el7.x86_64.rpm tk-8.5.13-6.el7.x86_64.rpm
libgcc-4.8.5-44.el7.x86_64.rpm perl-Getopt-Long-2.40-3.el7.noarch.rpm tk-devel-8.5.13-6.el7.x86_64.rpm
libgomp-4.8.5-44.el7.x86_64.rpm perl-HTTP-Tiny-0.033-3.el7.noarch.rpm util-linux-2.23.2-65.el7.x86_64.rpm
libkadm5-1.15.1-50.el7.x86_64.rpm perl-libs-5.16.3-297.el7.x86_64.rpm vim-common-7.4.629-7.el7.x86_64.rpm
libmount-2.23.2-65.el7.x86_64.rpm perl-macros-5.16.3-297.el7.x86_64.rpm vim-enhanced-7.4.629-7.el7.x86_64.rpm
libmpc-1.0.1-3.el7.x86_64.rpm perl-parent-0.225-244.el7.noarch.rpm vim-filesystem-7.4.629-7.el7.x86_64.rpm
libpcap-1.5.3-12.el7.x86_64.rpm perl-PathTools-3.40-5.el7.x86_64.rpm xorg-x11-proto-devel-2018.4-1.el7.noarch.rpm
libpcap-devel-1.5.3-12.el7.x86_64.rpm perl-Pod-Escapes-1.04-297.el7.noarch.rpm xz-devel-5.2.2-1.el7.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm perl-podlators-2.5.1-3.el7.noarch.rpm zip-3.0-11.el7.x86_64.rpm
libpng-devel-1.5.13-8.el7.x86_64.rpm perl-Pod-Perldoc-3.20-4.el7.noarch.rpm zlib-devel-1.2.7-18.el7.x86_64.rpm
libselinux-devel-2.5-15.el7.x86_64.rpm perl-Pod-Simple-3.28-4.el7.noarch.rpm
[root@localhost packages]# cd ..
[root@localhost base]# yum -y install createrepo
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
http://mirrors.aliyun.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.aliyun.com; Unknown error"
Trying other mirror.
http://mirrors.cloud.aliyuncs.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.cloud.aliyuncs.com; Unknown error"
Trying other mirror.
^Chttp://mirrors.aliyuncs.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#56 - "Callback aborted"
Trying other mirror.
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package createrepo.noarch 0:0.9.9-28.el7 will be installed
--> Processing Dependency: python-deltarpm for package: createrepo-0.9.9-28.el7.noarch
--> Processing Dependency: libxml2-python for package: createrepo-0.9.9-28.el7.noarch
--> Processing Dependency: deltarpm for package: createrepo-0.9.9-28.el7.noarch
--> Running transaction check
---> Package deltarpm.x86_64 0:3.6-3.el7 will be installed
---> Package libxml2-python.x86_64 0:2.9.1-6.el7.5 will be installed
--> Processing Dependency: libxml2 = 2.9.1-6.el7.5 for package: libxml2-python-2.9.1-6.el7.5.x86_64
---> Package python-deltarpm.x86_64 0:3.6-3.el7 will be installed
--> Running transaction check
---> Package libxml2.x86_64 0:2.9.1-6.el7.4 will be updated
---> Package libxml2.x86_64 0:2.9.1-6.el7.5 will be an update
^[[5~--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================================================
Installing:
createrepo noarch 0.9.9-28.el7 base 94 k
Installing for dependencies:
deltarpm x86_64 3.6-3.el7 base 82 k
libxml2-python x86_64 2.9.1-6.el7.5 base 247 k
python-deltarpm x86_64 3.6-3.el7 base 31 k
Updating for dependencies:
libxml2 x86_64 2.9.1-6.el7.5 base 668 k
Transaction Summary
====================================================================================================================================================================
Install 1 Package (+3 Dependent packages)
Upgrade ( 1 Dependent package)
Total download size: 1.1 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
(1/5): createrepo-0.9.9-28.el7.noarch.rpm | 94 kB 00:00:00
(2/5): deltarpm-3.6-3.el7.x86_64.rpm | 82 kB 00:00:00
(3/5): libxml2-python-2.9.1-6.el7.5.x86_64.rpm | 247 kB 00:00:00
(4/5): libxml2-2.9.1-6.el7.5.x86_64.rpm | 668 kB 00:00:00
(5/5): python-deltarpm-3.6-3.el7.x86_64.rpm | 31 kB 00:00:00
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 933 kB/s | 1.1 MB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : deltarpm-3.6-3.el7.x86_64 1/6
Installing : python-deltarpm-3.6-3.el7.x86_64 2/6
Updating : libxml2-2.9.1-6.el7.5.x86_64 3/6
Installing : libxml2-python-2.9.1-6.el7.5.x86_64 4/6
Installing : createrepo-0.9.9-28.el7.noarch 5/6
Cleanup : libxml2-2.9.1-6.el7.4.x86_64 6/6
Verifying : libxml2-python-2.9.1-6.el7.5.x86_64 1/6
Verifying : libxml2-2.9.1-6.el7.5.x86_64 2/6
Verifying : python-deltarpm-3.6-3.el7.x86_64 3/6
Verifying : deltarpm-3.6-3.el7.x86_64 4/6
Verifying : createrepo-0.9.9-28.el7.noarch 5/6
Verifying : libxml2-2.9.1-6.el7.4.x86_64 6/6
Installed:
createrepo.noarch 0:0.9.9-28.el7
Dependency Installed:
deltarpm.x86_64 0:3.6-3.el7 libxml2-python.x86_64 0:2.9.1-6.el7.5 python-deltarpm.x86_64 0:3.6-3.el7
Dependency Updated:
libxml2.x86_64 0:2.9.1-6.el7.5
Complete!
[root@localhost base]# createrepo packages/
Spawning worker 0 with 61 pkgs
Spawning worker 1 with 60 pkgs
Workers Finished
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete
[root@localhost base]# cd packages/
[root@localhost packages]# ls
bzip2-devel-1.0.6-13.el7.x86_64.rpm libsepol-devel-2.5-10.el7.x86_64.rpm perl-Pod-Usage-1.63-3.el7.noarch.rpm
cpp-4.8.5-44.el7.x86_64.rpm libsmartcols-2.23.2-65.el7.x86_64.rpm perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
createrepo-0.9.9-28.el7.noarch.rpm libss-1.42.9-19.el7.x86_64.rpm perl-Socket-2.010-5.el7.x86_64.rpm
cyrus-sasl-2.1.26-23.el7.x86_64.rpm libstdc++-4.8.5-44.el7.x86_64.rpm perl-srpm-macros-1-8.el7.noarch.rpm
cyrus-sasl-devel-2.1.26-23.el7.x86_64.rpm libstdc++-devel-4.8.5-44.el7.x86_64.rpm perl-Storable-2.45-3.el7.x86_64.rpm
dejavu-fonts-common-2.33-6.el7.noarch.rpm libtirpc-0.2.4-0.16.el7.x86_64.rpm perl-Text-ParseWords-3.29-4.el7.noarch.rpm
dejavu-sans-fonts-2.33-6.el7.noarch.rpm libuuid-2.23.2-65.el7.x86_64.rpm perl-threads-1.87-4.el7.x86_64.rpm
deltarpm-3.6-3.el7.x86_64.rpm libuuid-devel-2.23.2-65.el7.x86_64.rpm perl-threads-shared-1.43-6.el7.x86_64.rpm
dwz-0.11-3.el7.x86_64.rpm libverto-devel-0.2.5-4.el7.x86_64.rpm perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
e2fsprogs-1.42.9-19.el7.x86_64.rpm libXau-1.0.8-2.1.el7.x86_64.rpm perl-Time-Local-1.2300-2.el7.noarch.rpm
e2fsprogs-libs-1.42.9-19.el7.x86_64.rpm libXau-devel-1.0.8-2.1.el7.x86_64.rpm python-2.7.5-89.el7.x86_64.rpm
expat-2.1.0-12.el7.x86_64.rpm libxcb-1.13-1.el7.x86_64.rpm python2-rpm-macros-3-34.el7.noarch.rpm
expat-devel-2.1.0-12.el7.x86_64.rpm libxcb-devel-1.13-1.el7.x86_64.rpm python3-3.6.8-17.el7.x86_64.rpm
fontconfig-2.13.0-4.3.el7.x86_64.rpm libXft-2.3.2-2.el7.x86_64.rpm python3-devel-3.6.8-17.el7.x86_64.rpm
fontconfig-devel-2.13.0-4.3.el7.x86_64.rpm libXft-devel-2.3.2-2.el7.x86_64.rpm python3-libs-3.6.8-17.el7.x86_64.rpm
fontpackages-filesystem-1.44-8.el7.noarch.rpm libxml2-2.9.1-6.el7.5.x86_64.rpm python3-pip-9.0.3-8.el7.noarch.rpm
gcc-4.8.5-44.el7.x86_64.rpm libxml2-python-2.9.1-6.el7.5.x86_64.rpm python3-rpm-generators-6-2.el7.noarch.rpm
gcc-c++-4.8.5-44.el7.x86_64.rpm libXrender-0.9.10-1.el7.x86_64.rpm python3-rpm-macros-3-34.el7.noarch.rpm
gdbm-devel-1.10-8.el7.x86_64.rpm libXrender-devel-0.9.10-1.el7.x86_64.rpm python3-setuptools-39.2.0-10.el7.noarch.rpm
glibc-2.17-317.el7.x86_64.rpm mpfr-3.1.1-4.el7.x86_64.rpm python-deltarpm-3.6-3.el7.x86_64.rpm
glibc-common-2.17-317.el7.x86_64.rpm ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm python-devel-2.7.5-89.el7.x86_64.rpm
glibc-devel-2.17-317.el7.x86_64.rpm openssl-devel-1.0.2k-19.el7.x86_64.rpm python-libs-2.7.5-89.el7.x86_64.rpm
glibc-headers-2.17-317.el7.x86_64.rpm pcre-devel-8.32-17.el7.x86_64.rpm python-rpm-macros-3-34.el7.noarch.rpm
gpm-libs-1.20.7-6.el7.x86_64.rpm perl-5.16.3-297.el7.x86_64.rpm python-srpm-macros-3-34.el7.noarch.rpm
keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm perl-Carp-1.26-244.el7.noarch.rpm readline-devel-6.2-11.el7.x86_64.rpm
krb5-devel-1.15.1-50.el7.x86_64.rpm perl-constant-1.27-2.el7.noarch.rpm redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm
krb5-libs-1.15.1-50.el7.x86_64.rpm perl-Encode-2.51-7.el7.x86_64.rpm repodata
libblkid-2.23.2-65.el7.x86_64.rpm perl-Exporter-5.68-3.el7.noarch.rpm sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
libcom_err-1.42.9-19.el7.x86_64.rpm perl-File-Path-2.09-2.el7.noarch.rpm tcl-8.5.13-8.el7.x86_64.rpm
libcom_err-devel-1.42.9-19.el7.x86_64.rpm perl-File-Temp-0.23.01-3.el7.noarch.rpm tcl-devel-8.5.13-8.el7.x86_64.rpm
libffi-devel-3.0.13-19.el7.x86_64.rpm perl-Filter-1.49-3.el7.x86_64.rpm tk-8.5.13-6.el7.x86_64.rpm
libgcc-4.8.5-44.el7.x86_64.rpm perl-Getopt-Long-2.40-3.el7.noarch.rpm tk-devel-8.5.13-6.el7.x86_64.rpm
libgomp-4.8.5-44.el7.x86_64.rpm perl-HTTP-Tiny-0.033-3.el7.noarch.rpm util-linux-2.23.2-65.el7.x86_64.rpm
libkadm5-1.15.1-50.el7.x86_64.rpm perl-libs-5.16.3-297.el7.x86_64.rpm vim-common-7.4.629-7.el7.x86_64.rpm
libmount-2.23.2-65.el7.x86_64.rpm perl-macros-5.16.3-297.el7.x86_64.rpm vim-enhanced-7.4.629-7.el7.x86_64.rpm
libmpc-1.0.1-3.el7.x86_64.rpm perl-parent-0.225-244.el7.noarch.rpm vim-filesystem-7.4.629-7.el7.x86_64.rpm
libpcap-1.5.3-12.el7.x86_64.rpm perl-PathTools-3.40-5.el7.x86_64.rpm xorg-x11-proto-devel-2018.4-1.el7.noarch.rpm
libpcap-devel-1.5.3-12.el7.x86_64.rpm perl-Pod-Escapes-1.04-297.el7.noarch.rpm xz-devel-5.2.2-1.el7.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm perl-podlators-2.5.1-3.el7.noarch.rpm zip-3.0-11.el7.x86_64.rpm
libpng-devel-1.5.13-8.el7.x86_64.rpm perl-Pod-Perldoc-3.20-4.el7.noarch.rpm zlib-devel-1.2.7-18.el7.x86_64.rpm
libselinux-devel-2.5-15.el7.x86_64.rpm perl-Pod-Simple-3.28-4.el7.noarch.rpm
[root@localhost packages]# cd ..
[root@localhost base]# cp packages ../
cp: omitting directory ‘packages’
[root@localhost base]# ls
6d0c3a488c282fe537794b5946b01e28c7f44db79097bb06826e1c0c88bad5ef-primary.sqlite.bz2 gen
a4e2b46586aa556c3b6f814dad5b16db5a669984d66b68e873586cd7c7253301-c7-x86_64-comps.xml.gz mirrorlist.txt
cachecookie packages
d6d94c7d406fe7ad4902a97104b39a0d8299451832a97f31d71653ba982c955b-filelists.sqlite.bz2 repomd.xml
ecaab5cc3b9c10fefe6be2ecbf6f9fcb437231dac3e82cab8d9d2cf70e99644d-other.sqlite.bz2
[root@localhost base]# cd packages/
[root@localhost packages]# ls
bzip2-devel-1.0.6-13.el7.x86_64.rpm libsepol-devel-2.5-10.el7.x86_64.rpm perl-Pod-Usage-1.63-3.el7.noarch.rpm
cpp-4.8.5-44.el7.x86_64.rpm libsmartcols-2.23.2-65.el7.x86_64.rpm perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
createrepo-0.9.9-28.el7.noarch.rpm libss-1.42.9-19.el7.x86_64.rpm perl-Socket-2.010-5.el7.x86_64.rpm
cyrus-sasl-2.1.26-23.el7.x86_64.rpm libstdc++-4.8.5-44.el7.x86_64.rpm perl-srpm-macros-1-8.el7.noarch.rpm
cyrus-sasl-devel-2.1.26-23.el7.x86_64.rpm libstdc++-devel-4.8.5-44.el7.x86_64.rpm perl-Storable-2.45-3.el7.x86_64.rpm
dejavu-fonts-common-2.33-6.el7.noarch.rpm libtirpc-0.2.4-0.16.el7.x86_64.rpm perl-Text-ParseWords-3.29-4.el7.noarch.rpm
dejavu-sans-fonts-2.33-6.el7.noarch.rpm libuuid-2.23.2-65.el7.x86_64.rpm perl-threads-1.87-4.el7.x86_64.rpm
deltarpm-3.6-3.el7.x86_64.rpm libuuid-devel-2.23.2-65.el7.x86_64.rpm perl-threads-shared-1.43-6.el7.x86_64.rpm
dwz-0.11-3.el7.x86_64.rpm libverto-devel-0.2.5-4.el7.x86_64.rpm perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
e2fsprogs-1.42.9-19.el7.x86_64.rpm libXau-1.0.8-2.1.el7.x86_64.rpm perl-Time-Local-1.2300-2.el7.noarch.rpm
e2fsprogs-libs-1.42.9-19.el7.x86_64.rpm libXau-devel-1.0.8-2.1.el7.x86_64.rpm python-2.7.5-89.el7.x86_64.rpm
expat-2.1.0-12.el7.x86_64.rpm libxcb-1.13-1.el7.x86_64.rpm python2-rpm-macros-3-34.el7.noarch.rpm
expat-devel-2.1.0-12.el7.x86_64.rpm libxcb-devel-1.13-1.el7.x86_64.rpm python3-3.6.8-17.el7.x86_64.rpm
fontconfig-2.13.0-4.3.el7.x86_64.rpm libXft-2.3.2-2.el7.x86_64.rpm python3-devel-3.6.8-17.el7.x86_64.rpm
fontconfig-devel-2.13.0-4.3.el7.x86_64.rpm libXft-devel-2.3.2-2.el7.x86_64.rpm python3-libs-3.6.8-17.el7.x86_64.rpm
fontpackages-filesystem-1.44-8.el7.noarch.rpm libxml2-2.9.1-6.el7.5.x86_64.rpm python3-pip-9.0.3-8.el7.noarch.rpm
gcc-4.8.5-44.el7.x86_64.rpm libxml2-python-2.9.1-6.el7.5.x86_64.rpm python3-rpm-generators-6-2.el7.noarch.rpm
gcc-c++-4.8.5-44.el7.x86_64.rpm libXrender-0.9.10-1.el7.x86_64.rpm python3-rpm-macros-3-34.el7.noarch.rpm
gdbm-devel-1.10-8.el7.x86_64.rpm libXrender-devel-0.9.10-1.el7.x86_64.rpm python3-setuptools-39.2.0-10.el7.noarch.rpm
glibc-2.17-317.el7.x86_64.rpm mpfr-3.1.1-4.el7.x86_64.rpm python-deltarpm-3.6-3.el7.x86_64.rpm
glibc-common-2.17-317.el7.x86_64.rpm ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm python-devel-2.7.5-89.el7.x86_64.rpm
glibc-devel-2.17-317.el7.x86_64.rpm openssl-devel-1.0.2k-19.el7.x86_64.rpm python-libs-2.7.5-89.el7.x86_64.rpm
glibc-headers-2.17-317.el7.x86_64.rpm pcre-devel-8.32-17.el7.x86_64.rpm python-rpm-macros-3-34.el7.noarch.rpm
gpm-libs-1.20.7-6.el7.x86_64.rpm perl-5.16.3-297.el7.x86_64.rpm python-srpm-macros-3-34.el7.noarch.rpm
keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm perl-Carp-1.26-244.el7.noarch.rpm readline-devel-6.2-11.el7.x86_64.rpm
krb5-devel-1.15.1-50.el7.x86_64.rpm perl-constant-1.27-2.el7.noarch.rpm redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm
krb5-libs-1.15.1-50.el7.x86_64.rpm perl-Encode-2.51-7.el7.x86_64.rpm repodata
libblkid-2.23.2-65.el7.x86_64.rpm perl-Exporter-5.68-3.el7.noarch.rpm sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
libcom_err-1.42.9-19.el7.x86_64.rpm perl-File-Path-2.09-2.el7.noarch.rpm tcl-8.5.13-8.el7.x86_64.rpm
libcom_err-devel-1.42.9-19.el7.x86_64.rpm perl-File-Temp-0.23.01-3.el7.noarch.rpm tcl-devel-8.5.13-8.el7.x86_64.rpm
libffi-devel-3.0.13-19.el7.x86_64.rpm perl-Filter-1.49-3.el7.x86_64.rpm tk-8.5.13-6.el7.x86_64.rpm
libgcc-4.8.5-44.el7.x86_64.rpm perl-Getopt-Long-2.40-3.el7.noarch.rpm tk-devel-8.5.13-6.el7.x86_64.rpm
libgomp-4.8.5-44.el7.x86_64.rpm perl-HTTP-Tiny-0.033-3.el7.noarch.rpm util-linux-2.23.2-65.el7.x86_64.rpm
libkadm5-1.15.1-50.el7.x86_64.rpm perl-libs-5.16.3-297.el7.x86_64.rpm vim-common-7.4.629-7.el7.x86_64.rpm
libmount-2.23.2-65.el7.x86_64.rpm perl-macros-5.16.3-297.el7.x86_64.rpm vim-enhanced-7.4.629-7.el7.x86_64.rpm
libmpc-1.0.1-3.el7.x86_64.rpm perl-parent-0.225-244.el7.noarch.rpm vim-filesystem-7.4.629-7.el7.x86_64.rpm
libpcap-1.5.3-12.el7.x86_64.rpm perl-PathTools-3.40-5.el7.x86_64.rpm xorg-x11-proto-devel-2018.4-1.el7.noarch.rpm
libpcap-devel-1.5.3-12.el7.x86_64.rpm perl-Pod-Escapes-1.04-297.el7.noarch.rpm xz-devel-5.2.2-1.el7.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm perl-podlators-2.5.1-3.el7.noarch.rpm zip-3.0-11.el7.x86_64.rpm
libpng-devel-1.5.13-8.el7.x86_64.rpm perl-Pod-Perldoc-3.20-4.el7.noarch.rpm zlib-devel-1.2.7-18.el7.x86_64.rpm
libselinux-devel-2.5-15.el7.x86_64.rpm perl-Pod-Simple-3.28-4.el7.noarch.rpm
[root@localhost packages]# cd ..
[root@localhost base]# cd ..
[root@localhost soft]# ls
base epel extras pyhive timedhosts timedhosts.txt updates
[root@localhost soft]# cp -r base/packages ./
[root@localhost soft]# ls
base epel extras packages pyhive timedhosts timedhosts.txt updates
[root@localhost soft]# tar -zcvf pyhive.tar.gz pyhive packages
pyhive/
pyhive/requirements.txt
pyhive/future-0.18.2.tar.gz
pyhive/PyHive-0.6.3.tar.gz
pyhive/python_dateutil-2.8.1-py2.py3-none-any.whl
pyhive/six-1.15.0-py2.py3-none-any.whl
pyhive/thrift-0.13.0.tar.gz
pyhive/sasl-0.2.1.tar.gz
pyhive/thrift_sasl-0.4.2.tar.gz
packages/
packages/gpm-libs-1.20.7-6.el7.x86_64.rpm
packages/perl-5.16.3-297.el7.x86_64.rpm
packages/perl-Encode-2.51-7.el7.x86_64.rpm
packages/perl-Carp-1.26-244.el7.noarch.rpm
packages/perl-Exporter-5.68-3.el7.noarch.rpm
packages/perl-File-Path-2.09-2.el7.noarch.rpm
packages/perl-File-Temp-0.23.01-3.el7.noarch.rpm
packages/perl-Filter-1.49-3.el7.x86_64.rpm
packages/perl-Getopt-Long-2.40-3.el7.noarch.rpm
packages/perl-HTTP-Tiny-0.033-3.el7.noarch.rpm
packages/perl-PathTools-3.40-5.el7.x86_64.rpm
packages/perl-Pod-Escapes-1.04-297.el7.noarch.rpm
packages/perl-Pod-Perldoc-3.20-4.el7.noarch.rpm
packages/perl-Pod-Simple-3.28-4.el7.noarch.rpm
packages/perl-Pod-Usage-1.63-3.el7.noarch.rpm
packages/perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
packages/perl-Socket-2.010-5.el7.x86_64.rpm
packages/perl-Storable-2.45-3.el7.x86_64.rpm
packages/perl-Text-ParseWords-3.29-4.el7.noarch.rpm
packages/perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
packages/perl-Time-Local-1.2300-2.el7.noarch.rpm
packages/perl-constant-1.27-2.el7.noarch.rpm
packages/perl-libs-5.16.3-297.el7.x86_64.rpm
packages/perl-macros-5.16.3-297.el7.x86_64.rpm
packages/perl-parent-0.225-244.el7.noarch.rpm
packages/perl-podlators-2.5.1-3.el7.noarch.rpm
packages/perl-threads-1.87-4.el7.x86_64.rpm
packages/perl-threads-shared-1.43-6.el7.x86_64.rpm
packages/vim-common-7.4.629-7.el7.x86_64.rpm
packages/vim-enhanced-7.4.629-7.el7.x86_64.rpm
packages/vim-filesystem-7.4.629-7.el7.x86_64.rpm
packages/bzip2-devel-1.0.6-13.el7.x86_64.rpm
packages/dejavu-fonts-common-2.33-6.el7.noarch.rpm
packages/dejavu-sans-fonts-2.33-6.el7.noarch.rpm
packages/e2fsprogs-1.42.9-19.el7.x86_64.rpm
packages/e2fsprogs-libs-1.42.9-19.el7.x86_64.rpm
packages/expat-2.1.0-12.el7.x86_64.rpm
packages/expat-devel-2.1.0-12.el7.x86_64.rpm
packages/fontconfig-2.13.0-4.3.el7.x86_64.rpm
packages/fontconfig-devel-2.13.0-4.3.el7.x86_64.rpm
packages/fontpackages-filesystem-1.44-8.el7.noarch.rpm
packages/gdbm-devel-1.10-8.el7.x86_64.rpm
packages/keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm
packages/krb5-devel-1.15.1-50.el7.x86_64.rpm
packages/krb5-libs-1.15.1-50.el7.x86_64.rpm
packages/libXau-1.0.8-2.1.el7.x86_64.rpm
packages/libXau-devel-1.0.8-2.1.el7.x86_64.rpm
packages/libXft-2.3.2-2.el7.x86_64.rpm
packages/libXft-devel-2.3.2-2.el7.x86_64.rpm
packages/libXrender-0.9.10-1.el7.x86_64.rpm
packages/libXrender-devel-0.9.10-1.el7.x86_64.rpm
packages/libblkid-2.23.2-65.el7.x86_64.rpm
packages/libcom_err-1.42.9-19.el7.x86_64.rpm
packages/libcom_err-devel-1.42.9-19.el7.x86_64.rpm
packages/libkadm5-1.15.1-50.el7.x86_64.rpm
packages/libmount-2.23.2-65.el7.x86_64.rpm
packages/libpcap-devel-1.5.3-12.el7.x86_64.rpm
packages/libpcap-1.5.3-12.el7.x86_64.rpm
packages/libpng-1.5.13-8.el7.x86_64.rpm
packages/libpng-devel-1.5.13-8.el7.x86_64.rpm
packages/libselinux-devel-2.5-15.el7.x86_64.rpm
packages/libsepol-devel-2.5-10.el7.x86_64.rpm
packages/libsmartcols-2.23.2-65.el7.x86_64.rpm
packages/libss-1.42.9-19.el7.x86_64.rpm
packages/libuuid-2.23.2-65.el7.x86_64.rpm
packages/libuuid-devel-2.23.2-65.el7.x86_64.rpm
packages/libverto-devel-0.2.5-4.el7.x86_64.rpm
packages/libxcb-1.13-1.el7.x86_64.rpm
packages/libxcb-devel-1.13-1.el7.x86_64.rpm
packages/ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm
packages/openssl-devel-1.0.2k-19.el7.x86_64.rpm
packages/pcre-devel-8.32-17.el7.x86_64.rpm
packages/readline-devel-6.2-11.el7.x86_64.rpm
packages/sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
packages/tcl-8.5.13-8.el7.x86_64.rpm
packages/tcl-devel-8.5.13-8.el7.x86_64.rpm
packages/tk-8.5.13-6.el7.x86_64.rpm
packages/tk-devel-8.5.13-6.el7.x86_64.rpm
packages/util-linux-2.23.2-65.el7.x86_64.rpm
packages/xorg-x11-proto-devel-2018.4-1.el7.noarch.rpm
packages/xz-devel-5.2.2-1.el7.x86_64.rpm
packages/zlib-devel-1.2.7-18.el7.x86_64.rpm
packages/glibc-2.17-317.el7.x86_64.rpm
packages/cpp-4.8.5-44.el7.x86_64.rpm
packages/glibc-devel-2.17-317.el7.x86_64.rpm
packages/gcc-4.8.5-44.el7.x86_64.rpm
packages/glibc-common-2.17-317.el7.x86_64.rpm
packages/glibc-headers-2.17-317.el7.x86_64.rpm
packages/libgcc-4.8.5-44.el7.x86_64.rpm
packages/libgomp-4.8.5-44.el7.x86_64.rpm
packages/libmpc-1.0.1-3.el7.x86_64.rpm
packages/mpfr-3.1.1-4.el7.x86_64.rpm
packages/python-2.7.5-89.el7.x86_64.rpm
packages/python-devel-2.7.5-89.el7.x86_64.rpm
packages/python-libs-2.7.5-89.el7.x86_64.rpm
packages/python-rpm-macros-3-34.el7.noarch.rpm
packages/python-srpm-macros-3-34.el7.noarch.rpm
packages/python2-rpm-macros-3-34.el7.noarch.rpm
packages/libffi-devel-3.0.13-19.el7.x86_64.rpm
packages/gcc-c++-4.8.5-44.el7.x86_64.rpm
packages/libstdc++-4.8.5-44.el7.x86_64.rpm
packages/libstdc++-devel-4.8.5-44.el7.x86_64.rpm
packages/dwz-0.11-3.el7.x86_64.rpm
packages/libtirpc-0.2.4-0.16.el7.x86_64.rpm
packages/perl-srpm-macros-1-8.el7.noarch.rpm
packages/python3-3.6.8-17.el7.x86_64.rpm
packages/python3-devel-3.6.8-17.el7.x86_64.rpm
packages/python3-libs-3.6.8-17.el7.x86_64.rpm
packages/python3-pip-9.0.3-8.el7.noarch.rpm
packages/python3-rpm-generators-6-2.el7.noarch.rpm
packages/python3-rpm-macros-3-34.el7.noarch.rpm
packages/python3-setuptools-39.2.0-10.el7.noarch.rpm
packages/redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm
packages/zip-3.0-11.el7.x86_64.rpm
packages/cyrus-sasl-2.1.26-23.el7.x86_64.rpm
packages/cyrus-sasl-devel-2.1.26-23.el7.x86_64.rpm
packages/createrepo-0.9.9-28.el7.noarch.rpm
packages/deltarpm-3.6-3.el7.x86_64.rpm
packages/libxml2-2.9.1-6.el7.5.x86_64.rpm
packages/libxml2-python-2.9.1-6.el7.5.x86_64.rpm
packages/python-deltarpm-3.6-3.el7.x86_64.rpm
packages/repodata/
packages/repodata/a53f5c4daf20be83c216eefa2ec34902b3e2e8ef43df85a621483762366e2401-other.sqlite.bz2
packages/repodata/3d385bf3f4f0028cd274e0d6ef97b9ba082262ddb1742aaf3d14b1a5c394573f-other.xml.gz
packages/repodata/548a70f514b74eea73dd9f4da4895e043caaa0e2c7293262d2fb1a84efcf75f0-filelists.sqlite.bz2
packages/repodata/d9d814b0aae61a1836526d5790cb7feeab38746fdc73e672dbdc0bb2ed517d25-filelists.xml.gz
packages/repodata/67e789c3d9ab4c9e578e4605081fa316c2b4ed799308a051ef7ab23d0b641ee5-primary.sqlite.bz2
packages/repodata/a004a552df50459fd6dbade53d2b935a86111d0dcb47860988f433dcc7c7c579-primary.xml.gz
packages/repodata/repomd.xml
[root@localhost soft]# history
1 ping 11.com
2 ping qq.com
3 vi /etc/selinux/config
4 systemctl stop firewalld
5 ping qq.com
6 reboot
7 yum install vim
8 ls
9 history
10 ls /soft/base/packages/
11 ls
12 ls /usr/
13 mkdir -p /usr/local/python3
14 tar -zxvf Python-3.6.5.tgz
15 ls
16 cd Python-3.6.5
17 ls
18 ./configure --prefix=/usr/local/python3
19 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
20 yum install epel-release
21 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
22 ping qq.com
23 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
24 yum install epel-release
25 yum makecache
26 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
27 ./configure --prefix=/usr/local/python3
28 yum -y install gcc
29 ./configure --prefix=/usr/local/python3
30 make && make install
31 ln -s /usr/local/python3/bin/python3 /usr/bin/python3
32 vim ~/.bash.profile
33 vim ~/.bash_profile
34 source ~/.bash_profile
35 python3 -V
36 cd /soft/
37 ls
38 mkdir pyhive
39 pip3 -V
40 pip install pyhive
41 pip3 install pyhive
42 pip install --upgrade pip
43 pip3 -V
44 pip3 install --upgrade pip
45 pip3 install pyhive
46 cd pyhive/
47 pip3 freeze > requirements.txt
48 pip3 download -d /soft/pyhive -r requirements.txt
49 pip3 wheel -w /soft/pyhive -r requirements.txt
50 pip3 install thrift
51 pip3 freeze > requirements.txt
52 pip3 download -d /soft/pyhive -r requirements.txt
53 pip3 wheel -w /soft/pyhive -r requirements.txt
54 pip3 install sasl
55 yum -y install gcc
56 mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
57 wget -O /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
58 curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
59 yum -y install gcc
60 yum install python-devel
61 yum install gcc libffi-devel python-devel openssl-devel
62 yum install -y libffi-devel python-devel openssl-devel
63 pip3 install sasl
64 yum install cc1plus
65 yum install gcc-c++</span>
66 yum install gcc-c++
67 yum install gcc-c++ -y
68 pip3 install sasl
69 yum -y install python3-devel
70 pip3 install sasl
71 yum -y install cyrus-sasl cyrus-sasl-devel cyrus-sasl-lib
72 pip3 install sasl
73 pip3 install thrift_sasl
74 ls
75 pip3 freeze > requirements.txt
76 pip3 download -d /soft/pyhive -r requirements.txt
77 pip3 wheel -w /soft/pyhive -r requirements.txt
78 ls
79 cat requirements.txt
80 ls
81 cd ..
82 ls
83 cd base/packages/
84 ls
85 cd ..
86 yum -y install createrepo
87 createrepo packages/
88 cd packages/
89 ls
90 cd ..
91 cp packages ../
92 ls
93 cd packages/
94 ls
95 cd ..
96 ls
97 cp -r base/packages ./
98 ls
99 tar -zcvf pyhive.tar.gz pyhive packages
100 history
[root@localhost soft]# history | grep yum
7 yum install vim
19 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
20 yum install epel-release
21 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
23 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
24 yum install epel-release
25 yum makecache
26 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
28 yum -y install gcc
55 yum -y install gcc
56 mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
57 wget -O /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
58 curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
59 yum -y install gcc
60 yum install python-devel
61 yum install gcc libffi-devel python-devel openssl-devel
62 yum install -y libffi-devel python-devel openssl-devel
64 yum install cc1plus
65 yum install gcc-c++</span>
66 yum install gcc-c++
67 yum install gcc-c++ -y
69 yum -y install python3-devel
71 yum -y install cyrus-sasl cyrus-sasl-devel cyrus-sasl-lib
86 yum -y install createrepo
101 history | grep yum
[root@localhost soft]# yum -y install python3-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos error was
12: Timeout on https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=x86_64&infra=stock&content=centos: (28, 'Operation timed out after 30001 milliseconds wit h 0 out of 0 bytes received')
^C^C^C^C^C^C
^C
^C
^C
^C
^C
^C
^C
^C
^C
Exiting on user cancel
^C
^C
^C
^CException KeyboardInterrupt in <module 'threading' from '/usr/lib64/python2.7/threading.pyc'> ignored
[root@localhost soft]#
[root@localhost soft]# yum -y install python3-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
^C
Exiting on user cancel
[root@localhost soft]# yum -y install python3-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.3 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.bfsu.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package python3-devel-3.6.8-17.el7.x86_64 already installed and latest version
Nothing to do
[root@localhost soft]# rpm -qa | grep python3-devel
python3-devel-3.6.8-17.el7.x86_64
[root@localhost soft]# find / -name python3-devel
[root@localhost soft]# ^C
[root@localhost soft]# find / -name python3-devel*
/usr/share/doc/python3-devel-3.6.8
/soft/base/packages/python3-devel-3.6.8-17.el7.x86_64.rpm
/soft/packages/python3-devel-3.6.8-17.el7.x86_64.rpm
[root@localhost soft]# ls
base epel extras packages pyhive pyhive.tar.gz timedhosts timedhosts.txt updates
[root@localhost soft]# cd packages/
[root@localhost packages]# ls
bzip2-devel-1.0.6-13.el7.x86_64.rpm libsepol-devel-2.5-10.el7.x86_64.rpm perl-Pod-Usage-1.63-3.el7.noarch.rpm
cpp-4.8.5-44.el7.x86_64.rpm libsmartcols-2.23.2-65.el7.x86_64.rpm perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
createrepo-0.9.9-28.el7.noarch.rpm libss-1.42.9-19.el7.x86_64.rpm perl-Socket-2.010-5.el7.x86_64.rpm
cyrus-sasl-2.1.26-23.el7.x86_64.rpm libstdc++-4.8.5-44.el7.x86_64.rpm perl-srpm-macros-1-8.el7.noarch.rpm
cyrus-sasl-devel-2.1.26-23.el7.x86_64.rpm libstdc++-devel-4.8.5-44.el7.x86_64.rpm perl-Storable-2.45-3.el7.x86_64.rpm
dejavu-fonts-common-2.33-6.el7.noarch.rpm libtirpc-0.2.4-0.16.el7.x86_64.rpm perl-Text-ParseWords-3.29-4.el7.noarch.rpm
dejavu-sans-fonts-2.33-6.el7.noarch.rpm libuuid-2.23.2-65.el7.x86_64.rpm perl-threads-1.87-4.el7.x86_64.rpm
deltarpm-3.6-3.el7.x86_64.rpm libuuid-devel-2.23.2-65.el7.x86_64.rpm perl-threads-shared-1.43-6.el7.x86_64.rpm
dwz-0.11-3.el7.x86_64.rpm libverto-devel-0.2.5-4.el7.x86_64.rpm perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
e2fsprogs-1.42.9-19.el7.x86_64.rpm libXau-1.0.8-2.1.el7.x86_64.rpm perl-Time-Local-1.2300-2.el7.noarch.rpm
e2fsprogs-libs-1.42.9-19.el7.x86_64.rpm libXau-devel-1.0.8-2.1.el7.x86_64.rpm python-2.7.5-89.el7.x86_64.rpm
expat-2.1.0-12.el7.x86_64.rpm libxcb-1.13-1.el7.x86_64.rpm python2-rpm-macros-3-34.el7.noarch.rpm
expat-devel-2.1.0-12.el7.x86_64.rpm libxcb-devel-1.13-1.el7.x86_64.rpm python3-3.6.8-17.el7.x86_64.rpm
fontconfig-2.13.0-4.3.el7.x86_64.rpm libXft-2.3.2-2.el7.x86_64.rpm python3-devel-3.6.8-17.el7.x86_64.rpm
fontconfig-devel-2.13.0-4.3.el7.x86_64.rpm libXft-devel-2.3.2-2.el7.x86_64.rpm python3-libs-3.6.8-17.el7.x86_64.rpm
fontpackages-filesystem-1.44-8.el7.noarch.rpm libxml2-2.9.1-6.el7.5.x86_64.rpm python3-pip-9.0.3-8.el7.noarch.rpm
gcc-4.8.5-44.el7.x86_64.rpm libxml2-python-2.9.1-6.el7.5.x86_64.rpm python3-rpm-generators-6-2.el7.noarch.rpm
gcc-c++-4.8.5-44.el7.x86_64.rpm libXrender-0.9.10-1.el7.x86_64.rpm python3-rpm-macros-3-34.el7.noarch.rpm
gdbm-devel-1.10-8.el7.x86_64.rpm libXrender-devel-0.9.10-1.el7.x86_64.rpm python3-setuptools-39.2.0-10.el7.noarch.rpm
glibc-2.17-317.el7.x86_64.rpm mpfr-3.1.1-4.el7.x86_64.rpm python-deltarpm-3.6-3.el7.x86_64.rpm
glibc-common-2.17-317.el7.x86_64.rpm ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm python-devel-2.7.5-89.el7.x86_64.rpm
glibc-devel-2.17-317.el7.x86_64.rpm openssl-devel-1.0.2k-19.el7.x86_64.rpm python-libs-2.7.5-89.el7.x86_64.rpm
glibc-headers-2.17-317.el7.x86_64.rpm pcre-devel-8.32-17.el7.x86_64.rpm python-rpm-macros-3-34.el7.noarch.rpm
gpm-libs-1.20.7-6.el7.x86_64.rpm perl-5.16.3-297.el7.x86_64.rpm python-srpm-macros-3-34.el7.noarch.rpm
keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm perl-Carp-1.26-244.el7.noarch.rpm readline-devel-6.2-11.el7.x86_64.rpm
krb5-devel-1.15.1-50.el7.x86_64.rpm perl-constant-1.27-2.el7.noarch.rpm redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm
krb5-libs-1.15.1-50.el7.x86_64.rpm perl-Encode-2.51-7.el7.x86_64.rpm repodata
libblkid-2.23.2-65.el7.x86_64.rpm perl-Exporter-5.68-3.el7.noarch.rpm sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
libcom_err-1.42.9-19.el7.x86_64.rpm perl-File-Path-2.09-2.el7.noarch.rpm tcl-8.5.13-8.el7.x86_64.rpm
libcom_err-devel-1.42.9-19.el7.x86_64.rpm perl-File-Temp-0.23.01-3.el7.noarch.rpm tcl-devel-8.5.13-8.el7.x86_64.rpm
libffi-devel-3.0.13-19.el7.x86_64.rpm perl-Filter-1.49-3.el7.x86_64.rpm tk-8.5.13-6.el7.x86_64.rpm
libgcc-4.8.5-44.el7.x86_64.rpm perl-Getopt-Long-2.40-3.el7.noarch.rpm tk-devel-8.5.13-6.el7.x86_64.rpm
libgomp-4.8.5-44.el7.x86_64.rpm perl-HTTP-Tiny-0.033-3.el7.noarch.rpm util-linux-2.23.2-65.el7.x86_64.rpm
libkadm5-1.15.1-50.el7.x86_64.rpm perl-libs-5.16.3-297.el7.x86_64.rpm vim-common-7.4.629-7.el7.x86_64.rpm
libmount-2.23.2-65.el7.x86_64.rpm perl-macros-5.16.3-297.el7.x86_64.rpm vim-enhanced-7.4.629-7.el7.x86_64.rpm
libmpc-1.0.1-3.el7.x86_64.rpm perl-parent-0.225-244.el7.noarch.rpm vim-filesystem-7.4.629-7.el7.x86_64.rpm
libpcap-1.5.3-12.el7.x86_64.rpm perl-PathTools-3.40-5.el7.x86_64.rpm xorg-x11-proto-devel-2018.4-1.el7.noarch.rpm
libpcap-devel-1.5.3-12.el7.x86_64.rpm perl-Pod-Escapes-1.04-297.el7.noarch.rpm xz-devel-5.2.2-1.el7.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm perl-podlators-2.5.1-3.el7.noarch.rpm zip-3.0-11.el7.x86_64.rpm
libpng-devel-1.5.13-8.el7.x86_64.rpm perl-Pod-Perldoc-3.20-4.el7.noarch.rpm zlib-devel-1.2.7-18.el7.x86_64.rpm
libselinux-devel-2.5-15.el7.x86_64.rpm perl-Pod-Simple-3.28-4.el7.noarch.rpm
[root@localhost packages]#