View的绘制三：UI绘制的三大步骤
上节讲到View的绘制最终调用ViewRootImpl的三大方法是performMeasure()、performLayout()、performDraw()。下面就从源码角度详细介绍下三大方法的具体实现。canvas
首先须要了解一下MeasureSpec类（View的内部类）：MeasureSpec为测量规格，由32位的int值组成，前两位是表示测量模式SpecMode，后30位表示测量的尺寸SpecSize。缓存
步骤一：测量 --> performMeasure():
先来看看performMeasure(int childWidthMeasureSpec, int childHeightMeasureSpec)中的两个参数是如何获取到的，经过代码查看到：bash
//第一个参数mWidth指的是窗口的宽，lp.width指的是顶层容器DecorView的宽Layoutparams值。
int childWidthMeasureSpec = getRootMeasureSpec(mWidth, lp.width);
int childHeightMeasureSpec = getRootMeasureSpec(mHeight, lp.height);复制代码
从代码中咱们能够发现两个参数是经过getRootMeasureSpec()方法获取的。再来看看getRootMeasureSpec()方法的实现。app
private static int getRootMeasureSpec(int windowSize, int rootDimension) {
int measureSpec;
switch (rootDimension) {
case ViewGroup.LayoutParams.MATCH_PARENT:
// Window can't resize. Force root view to be windowSize. // 窗口不能改变，root view 为windowSize的大小 measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.EXACTLY); break; case ViewGroup.LayoutParams.WRAP_CONTENT: // Window can resize. Set max size for root view. //窗口大小能够改变，最大为windowSize的布局 measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.AT_MOST); break; default: // Window wants to be an exact size. Force root view to be that size. //窗口大小为具体设置的值 measureSpec = MeasureSpec.makeMeasureSpec(rootDimension, MeasureSpec.EXACTLY); break; } return measureSpec; }复制代码
由以上代码咱们能够总结出：ide
接着继续查看performMeasure()方法：oop
private void performMeasure(int childWidthMeasureSpec, int childHeightMeasureSpec) {
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "measure");
try {
mView.measure(childWidthMeasureSpec, childHeightMeasureSpec);
} finally {
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
}复制代码
由以上代码能够发现performMeasure()方法中调用了mView.measure(childWidthMeasureSpec, childHeightMeasureSpec);这个mView其实是就是顶层的布局容器DecorView。进入到View的measure方法：measure(int widthMeasureSpec, int heightMeasureSpec)中的两个参数widthMeasureSpec和heightMeasureSpec这两个参数是由MeasureSpec获得的。布局
public final void measure(int widthMeasureSpec, int heightMeasureSpec) {
boolean optical = isLayoutModeOptical(this);
if (optical != isLayoutModeOptical(mParent)) {
Insets insets = getOpticalInsets();
int oWidth = insets.left + insets.right;
int oHeight = insets.top + insets.bottom;
widthMeasureSpec = MeasureSpec.adjust(widthMeasureSpec, optical ? -oWidth : oWidth);
heightMeasureSpec = MeasureSpec.adjust(heightMeasureSpec, optical ? -oHeight : oHeight);
}
// Suppress sign extension for the low bytes
//读取缓存
long key = (long) widthMeasureSpec << 32 | (long) heightMeasureSpec & 0xffffffffL;
if (mMeasureCache == null) mMeasureCache = new LongSparseLongArray(2);
if ((mPrivateFlags & PFLAG_FORCE_LAYOUT) == PFLAG_FORCE_LAYOUT ||
widthMeasureSpec != mOldWidthMeasureSpec ||
heightMeasureSpec != mOldHeightMeasureSpec) {
// first clears the measured dimension flag
mPrivateFlags &= ~PFLAG_MEASURED_DIMENSION_SET;
resolveRtlPropertiesIfNeeded();
int cacheIndex = (mPrivateFlags & PFLAG_FORCE_LAYOUT) == PFLAG_FORCE_LAYOUT ? -1 :
mMeasureCache.indexOfKey(key);
if (cacheIndex < 0 || sIgnoreMeasureCache) {
// measure ourselves, this should set the measured dimension flag back
onMeasure(widthMeasureSpec, heightMeasureSpec);
mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
} else {
long value = mMeasureCache.valueAt(cacheIndex);
// Casting a long to int drops the high 32 bits, no mask needed
setMeasuredDimensionRaw((int) (value >> 32), (int) value);
mPrivateFlags3 |= PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
}
// flag not set, setMeasuredDimension() was not invoked, we raise
// an exception to warn the developer
if ((mPrivateFlags & PFLAG_MEASURED_DIMENSION_SET) != PFLAG_MEASURED_DIMENSION_SET) {
throw new IllegalStateException("View with id " + getId() + ": "
+ getClass().getName() + "#onMeasure() did not set the"
+ " measured dimension by calling"
+ " setMeasuredDimension()");
}
mPrivateFlags |= PFLAG_LAYOUT_REQUIRED;
}
mOldWidthMeasureSpec = widthMeasureSpec;
mOldHeightMeasureSpec = heightMeasureSpec;
//添加到缓存中
mMeasureCache.put(key, ((long) mMeasuredWidth) << 32 |
(long) mMeasuredHeight & 0xffffffffL); // suppress sign extension
}复制代码
在mView.measure方法中主要调用了onMeasure()方法，上面已经说了，这里的mView就是DecorView，在DecorView的onMeasure()方法中调用了super.onMeasure()方法。因为DecorView继承自FrameLayout，全部咱们能够查看FrameLayout的onMeasure()方法的具体实现：post
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int count = getChildCount();
final boolean measureMatchParentChildren =
MeasureSpec.getMode(widthMeasureSpec) != MeasureSpec.EXACTLY ||
MeasureSpec.getMode(heightMeasureSpec) != MeasureSpec.EXACTLY;
mMatchParentChildren.clear();
int maxHeight = 0;
int maxWidth = 0;
int childState = 0;
//遍历子View
for (int i = 0; i < count; i++) {
final View child = getChildAt(i);
if (mMeasureAllChildren || child.getVisibility() != GONE) {
measureChildWithMargins(child, widthMeasureSpec, 0, heightMeasureSpec, 0);
final LayoutParams lp = (LayoutParams) child.getLayoutParams();
maxWidth = Math.max(maxWidth,
child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin);
maxHeight = Math.max(maxHeight,
child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin);
childState = combineMeasuredStates(childState, child.getMeasuredState());
if (measureMatchParentChildren) {
if (lp.width == LayoutParams.MATCH_PARENT ||
lp.height == LayoutParams.MATCH_PARENT) {
mMatchParentChildren.add(child);
}
}
}
}
......
setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState),
resolveSizeAndState(maxHeight, heightMeasureSpec,
childState << MEASURED_HEIGHT_STATE_SHIFT));
......
}复制代码
在FrameLayout的onMeasure()方法中咱们能够看到，对子view进行遍历，并调用measureChildWithMargins()方法，此方法是在ViewGroup中实现的。在此方法中获取子view的测量规格：ui
protected void measureChildWithMargins(View child,
int parentWidthMeasureSpec, int widthUsed,
int parentHeightMeasureSpec, int heightUsed) {
final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
//获取子控件的测量规格
final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin
+ widthUsed, lp.width);
final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin
+ heightUsed, lp.height);
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}复制代码
咱们再来看看getChildMeasureSpec()方法，三个参数：第一个spec为父容器的MeasureSpec,padding为父容器已经使用的空间，childDimension指子控件中设置的LayoutParams如match_parent/wrap_content/具体的值。this
public static int getChildMeasureSpec(int spec, int padding, int childDimension) {
int specMode = MeasureSpec.getMode(spec);
int specSize = MeasureSpec.getSize(spec);
int size = Math.max(0, specSize - padding);
int resultSize = 0;
int resultMode = 0;
switch (specMode) {
// Parent has imposed an exact size on us
//若是父控件的测量模式是MeasureSpec.EXACTLY：
case MeasureSpec.EXACTLY:
//若是子控件childDimension设置的是固定大小，那么子控件尺寸为设置的尺寸，specMode 是EXACTLY.
if (childDimension >= 0) {
resultSize = childDimension;
resultMode = MeasureSpec.EXACTLY;
//若是子控件childDimension是match_parent,子控件的大小就是父控件尺寸-padding,specMode为EXACTLY.
} else if (childDimension == LayoutParams.MATCH_PARENT) {
// Child wants to be our size. So be it.
resultSize = size;
resultMode = MeasureSpec.EXACTLY;
//若是子控件childDimension为wrap_content,子控件想本身肯定本身的尺寸，最大不超过父容器的尺寸。
//因为不能肯定子view的尺寸，因此暂时设为 父控件尺寸-padding。specMode为 AT_MOST.
} else if (childDimension == LayoutParams.WRAP_CONTENT) {
// Child wants to determine its own size. It can't be // bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } break; // Parent has imposed a maximum size on us // 父容器的specMode为AT_MOST:父容器也不知道本身的精确尺寸 case MeasureSpec.AT_MOST: //若是子控件childDimension设置的是固定大小时，那么子控件尺寸为设置的尺寸，specMode为EXACTLY. if (childDimension >= 0) { // Child wants a specific size... so be it resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; //若是子控件childDimension为match_parent时，子控件的尺寸不能肯定，暂时赋值为父控件的尺寸-padding, //这个尺寸只是暂时的，而不是最终的子控件的大小，specMode为AT_MOST. } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size, but our size is not fixed. // Constrain child to not be bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; //若是子控件的childDimension为wrap_content时，子控件的尺寸不能肯定，暂时赋值为父控件的尺寸-padding, //这个尺寸只是暂时的，而不是最终的子控件的大小，specMode为AT_MOST. } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be
// bigger than us.
resultSize = size;
resultMode = MeasureSpec.AT_MOST;
}
break;
// Parent asked to see how big we want to be
//父控件的specMode为UNSPECIFIED:大小不受限制（通常由系统定义，开发中用不到）
case MeasureSpec.UNSPECIFIED:
if (childDimension >= 0) {
// Child wants a specific size... let him have it
resultSize = childDimension;
resultMode = MeasureSpec.EXACTLY;
} else if (childDimension == LayoutParams.MATCH_PARENT) {
// Child wants to be our size... find out how big it should
// be
resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size;
resultMode = MeasureSpec.UNSPECIFIED;
} else if (childDimension == LayoutParams.WRAP_CONTENT) {
// Child wants to determine its own size.... find out how
// big it should be
resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size;
resultMode = MeasureSpec.UNSPECIFIED;
}
break;
}
//noinspection ResourceType
//最后生成子view的specSize 和 specMode 生成子View的MeasureSpec返回给child.measure方法进行调用
return MeasureSpec.makeMeasureSpec(resultSize, resultMode);
}复制代码
能够用一张表来归纳子View的MeasureSpec的对应跟父控件SpecMode的对应关系：
在onMeasure方法中调用了measureChildWithMargins()方法后，onMeasure方法中又调用了setMeasuredDimension();setMeasuredDimension中又调用了setMeasureDimensionRaw()方法：此方法中对mMeasuredWidth、mMeasureHeight成员变量进行赋值， 肯定控件自身的宽高。
private void setMeasuredDimensionRaw(int measuredWidth, int measuredHeight) {
mMeasuredWidth = measuredWidth;
mMeasuredHeight = measuredHeight;
mPrivateFlags |= PFLAG_MEASURED_DIMENSION_SET;
}复制代码
总结：
对于ViewGroup的测量流程：首先调用measure() --> onMeasure()：经过measureChildWithMagins()获取子View的MeasureSpec,而后调用child.measure()完成子View的测量； --> setMeasuredDimension() --> setMeasuredDimensionRaw():保存本身的宽高。
对于View的测量流程：首先调用measure() --> onMeasure() --> setMeasuredDimension() --> setMeasuredDimensionRaw():保存本身的宽
与ViewGroup不一样的是View不须要对子View进行测量。在View的setMeasuredDimension()方法中：
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec),
getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec));
}复制代码
这里须要注意的是getDefaultSize()方法的调用：
public static int getDefaultSize(int size, int measureSpec) {
int result = size;
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
switch (specMode) {
case MeasureSpec.UNSPECIFIED:
result = size;
break;
case MeasureSpec.AT_MOST:
case MeasureSpec.EXACTLY:
result = specSize;
break;
}
return result;
}复制代码
由以上代码中能够发现，当自身的测量模式为AT_MOST或者EXACTLY的时候，都返回的是specSize，即测量规格measureSpec中的size。由此可知，当咱们自定义View的时候若是不重写onMeasure()方法的话，那在布局文件写给自定义view设置宽高为match_parent 和wrap_content的效果是同样的。
步骤二：布局--> performLayout():
首先咱们来查看ViewRootImpl中的performLayout(WindowManager.LayoutParams lp, int desiredWindowWidth,int desiredWindowHeight); 第一个参数为顶层布局容器的LayoutParams,后面两个参数分别为顶层布局容器的宽高。
private void performLayout(WindowManager.LayoutParams lp, int desiredWindowWidth,
int desiredWindowHeight) {
mLayoutRequested = false;
mScrollMayChange = true;
mInLayout = true;
//host便是DecorView
final View host = mView;
if (host == null) {
return;
}
......
try {
host.layout(0, 0, host.getMeasuredWidth(), host.getMeasuredHeight());
mInLayout = false;
int numViewsRequestingLayout = mLayoutRequesters.size();
if (numViewsRequestingLayout > 0) {
// requestLayout() was called during layout.
// If no layout-request flags are set on the requesting views, there is no problem.
// If some requests are still pending, then we need to clear those flags and do
// a full request/measure/layout pass to handle this situation.
ArrayList<View> validLayoutRequesters = getValidLayoutRequesters(mLayoutRequesters,
false);
if (validLayoutRequesters != null) {
// Set this flag to indicate that any further requests are happening during
// the second pass, which may result in posting those requests to the next
// frame instead
mHandlingLayoutInLayoutRequest = true;
// Process fresh layout requests, then measure and layout
int numValidRequests = validLayoutRequesters.size();
for (int i = 0; i < numValidRequests; ++i) {
final View view = validLayoutRequesters.get(i);
Log.w("View", "requestLayout() improperly called by " + view +
" during layout: running second layout pass");
view.requestLayout();
}
measureHierarchy(host, lp, mView.getContext().getResources(),
desiredWindowWidth, desiredWindowHeight);
mInLayout = true;
host.layout(0, 0, host.getMeasuredWidth(), host.getMeasuredHeight());
mHandlingLayoutInLayoutRequest = false;
// Check the valid requests again, this time without checking/clearing the
// layout flags, since requests happening during the second pass get noop'd validLayoutRequesters = getValidLayoutRequesters(mLayoutRequesters, true); if (validLayoutRequesters != null) { final ArrayList<View> finalRequesters = validLayoutRequesters; // Post second-pass requests to the next frame getRunQueue().post(new Runnable() { @Override public void run() { int numValidRequests = finalRequesters.size(); for (int i = 0; i < numValidRequests; ++i) { final View view = finalRequesters.get(i); Log.w("View", "requestLayout() improperly called by " + view + " during second layout pass: posting in next frame"); view.requestLayout(); } } }); } } } } finally { Trace.traceEnd(Trace.TRACE_TAG_VIEW); } mInLayout = false; }复制代码
在performLayout()方法中调用了 host.layout(0, 0, host.getMeasuredWidth(), host.getMeasuredHeight());host便是DecorView，再来看看layout()方法：
@SuppressWarnings({"unchecked"})
public void layout(int l, int t, int r, int b) {
if ((mPrivateFlags3 & PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT) != 0) {
onMeasure(mOldWidthMeasureSpec, mOldHeightMeasureSpec);
mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
}
int oldL = mLeft;
int oldT = mTop;
int oldB = mBottom;
int oldR = mRight;
boolean changed = isLayoutModeOptical(mParent) ?
setOpticalFrame(l, t, r, b) : setFrame(l, t, r, b);
if (changed || (mPrivateFlags & PFLAG_LAYOUT_REQUIRED) == PFLAG_LAYOUT_REQUIRED) {
//供子类实现
onLayout(changed, l, t, r, b);
if (shouldDrawRoundScrollbar()) {
if(mRoundScrollbarRenderer == null) {
mRoundScrollbarRenderer = new RoundScrollbarRenderer(this);
}
} else {
mRoundScrollbarRenderer = null;
}
mPrivateFlags &= ~PFLAG_LAYOUT_REQUIRED;
ListenerInfo li = mListenerInfo;
if (li != null && li.mOnLayoutChangeListeners != null) {
ArrayList<OnLayoutChangeListener> listenersCopy =
(ArrayList<OnLayoutChangeListener>)li.mOnLayoutChangeListeners.clone();
int numListeners = listenersCopy.size();
for (int i = 0; i < numListeners; ++i) {
listenersCopy.get(i).onLayoutChange(this, l, t, r, b, oldL, oldT, oldR, oldB);
}
}
}
final boolean wasLayoutValid = isLayoutValid();
mPrivateFlags &= ~PFLAG_FORCE_LAYOUT;
mPrivateFlags3 |= PFLAG3_IS_LAID_OUT;
if (!wasLayoutValid && isFocused()) {
mPrivateFlags &= ~PFLAG_WANTS_FOCUS;
if (canTakeFocus()) {
// We have a robust focus, so parents should no longer be wanting focus.
clearParentsWantFocus();
} else if (getViewRootImpl() == null || !getViewRootImpl().isInLayout()) {
// This is a weird case. Most-likely the user, rather than ViewRootImpl, called
// layout. In this case, there's no guarantee that parent layouts will be evaluated // and thus the safest action is to clear focus here. clearFocusInternal(null, /* propagate */ true, /* refocus */ false); clearParentsWantFocus(); } else if (!hasParentWantsFocus()) { // original requestFocus was likely on this view directly, so just clear focus clearFocusInternal(null, /* propagate */ true, /* refocus */ false); } // otherwise, we let parents handle re-assigning focus during their layout passes. } else if ((mPrivateFlags & PFLAG_WANTS_FOCUS) != 0) { mPrivateFlags &= ~PFLAG_WANTS_FOCUS; View focused = findFocus(); if (focused != null) { // Try to restore focus as close as possible to our starting focus. if (!restoreDefaultFocus() && !hasParentWantsFocus()) { // Give up and clear focus once we've reached the top-most parent which wants
// focus.
focused.clearFocusInternal(null, /* propagate */ true, /* refocus */ false);
}
}
}
if ((mPrivateFlags3 & PFLAG3_NOTIFY_AUTOFILL_ENTER_ON_LAYOUT) != 0) {
mPrivateFlags3 &= ~PFLAG3_NOTIFY_AUTOFILL_ENTER_ON_LAYOUT;
notifyEnterOrExitForAutoFillIfNeeded(true);
}
}复制代码
在layout()方法中调用了boolean changed = isLayoutModeOptical(mParent) ?setOpticalFrame(l, t, r, b) : setFrame(l, t, r, b); 在setOpticalFrame()方法中最终也是调用的setFrame()方法，在这个方法中主要是对位置信息left、right、top、bottom进行赋值，赋值完以后自身的位置就摆放成功了。咱们看看setFrame()代码的实现：
protected boolean setFrame(int left, int top, int right, int bottom) {
boolean changed = false;
......
if (mLeft != left || mRight != right || mTop != top || mBottom != bottom) {
changed = true;
// Remember our drawn bit
int drawn = mPrivateFlags & PFLAG_DRAWN;
int oldWidth = mRight - mLeft;
int oldHeight = mBottom - mTop;
int newWidth = right - left;
int newHeight = bottom - top;
boolean sizeChanged = (newWidth != oldWidth) || (newHeight != oldHeight);
// Invalidate our old position
invalidate(sizeChanged);
mLeft = left;
mTop = top;
mRight = right;
mBottom = bottom;
mRenderNode.setLeftTopRightBottom(mLeft, mTop, mRight, mBottom);
mPrivateFlags |= PFLAG_HAS_BOUNDS;
if (sizeChanged) {
sizeChange(newWidth, newHeight, oldWidth, oldHeight);
}
if ((mViewFlags & VISIBILITY_MASK) == VISIBLE || mGhostView != null) {
// If we are visible, force the DRAWN bit to on so that
// this invalidate will go through (at least to our parent).
// This is because someone may have invalidated this view
// before this call to setFrame came in, thereby clearing
// the DRAWN bit.
mPrivateFlags |= PFLAG_DRAWN;
invalidate(sizeChanged);
// parent display list may need to be recreated based on a change in the bounds
// of any child
invalidateParentCaches();
}
// Reset drawn bit to original value (invalidate turns it off)
mPrivateFlags |= drawn;
mBackgroundSizeChanged = true;
mDefaultFocusHighlightSizeChanged = true;
if (mForegroundInfo != null) {
mForegroundInfo.mBoundsChanged = true;
}
notifySubtreeAccessibilityStateChangedIfNeeded();
}
return changed;
}复制代码
layout()方法调用了setFrame()方法后，而后会调用onLayout()方法供子类实现。若是咱们自定义ViewGroup时，咱们就须要重写onLayout()进行子view的布局摆放。若是是自定义就不须要重写此方法。
总结：
对于ViewGroup的布局流程: 经过layout()来肯定本身左右上下四个点的位置 --> 重写onLayout()进行子View的布局。
对于View的布局流程：经过layout()方法来肯定本身的位置。
步骤三：绘制 --> performDraw()
首先来看看ViewRootImpl的performDraw()方法的实现：
private void performDraw() {
......
try {
boolean canUseAsync = draw(fullRedrawNeeded);
if (usingAsyncReport && !canUseAsync) {
mAttachInfo.mThreadedRenderer.setFrameCompleteCallback(null);
usingAsyncReport = false;
}
} finally {
mIsDrawing = false;
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
......
}复制代码
此方法中又调用了boolean canUseAsync = draw(fullRedrawNeeded);
在draw()方法中又调用了drawSoftware()方法，代码实现：
private boolean drawSoftware(Surface surface, AttachInfo attachInfo, int xoff, int yoff,
boolean scalingRequired, Rect dirty, Rect surfaceInsets) {
// Draw with software renderer.
final Canvas canvas;
......
try {
......
try {
canvas.translate(-xoff, -yoff);
if (mTranslator != null) {
mTranslator.translateCanvas(canvas);
}
canvas.setScreenDensity(scalingRequired ? mNoncompatDensity : 0);
attachInfo.mSetIgnoreDirtyState = false;
mView.draw(canvas);
drawAccessibilityFocusedDrawableIfNeeded(canvas);
} finally {
if (!attachInfo.mSetIgnoreDirtyState) {
// Only clear the flag if it was not set during the mView.draw() call
attachInfo.mIgnoreDirtyState = false;
}
}
} finally {
......
}
return true;
}复制代码
在drawSoftware()方法中调用了mView.draw(canvas)方法，这里的mView即为DecorView。
draw()方法的实现是在View中：
@CallSuper
public void draw(Canvas canvas) {
final int privateFlags = mPrivateFlags;
final boolean dirtyOpaque = (privateFlags & PFLAG_DIRTY_MASK) == PFLAG_DIRTY_OPAQUE &&
(mAttachInfo == null || !mAttachInfo.mIgnoreDirtyState);
mPrivateFlags = (privateFlags & ~PFLAG_DIRTY_MASK) | PFLAG_DRAWN;
/*
* Draw traversal performs several drawing steps which must be executed
* in the appropriate order:
*
* 1. Draw the background
* 2. If necessary, save the canvas' layers to prepare for fading * 3. Draw view's content
* 4. Draw children
* 5. If necessary, draw the fading edges and restore layers
* 6. Draw decorations (scrollbars for instance)
*/
// Step 1, draw the background, if needed
int saveCount;
//第一步：绘制背景
if (!dirtyOpaque) {
drawBackground(canvas);
}
// skip step 2 & 5 if possible (common case)
final int viewFlags = mViewFlags;
boolean horizontalEdges = (viewFlags & FADING_EDGE_HORIZONTAL) != 0;
boolean verticalEdges = (viewFlags & FADING_EDGE_VERTICAL) != 0;
if (!verticalEdges && !horizontalEdges) {
// Step 3, draw the content
//绘制本身
if (!dirtyOpaque) onDraw(canvas);
// Step 4, draw the children
//绘制子view
dispatchDraw(canvas);
drawAutofilledHighlight(canvas);
// Overlay is part of the content and draws beneath Foreground
if (mOverlay != null && !mOverlay.isEmpty()) {
mOverlay.getOverlayView().dispatchDraw(canvas);
}
// Step 6, draw decorations (foreground, scrollbars)
//绘制前景
onDrawForeground(canvas);
// Step 7, draw the default focus highlight
drawDefaultFocusHighlight(canvas);
if (debugDraw()) {
debugDrawFocus(canvas);
}
// we're done... return; } ...... }复制代码
在View的draw(canvas)方法中主要调用了drawBackground()、onDraw()、dispatchView()、onDrawForeground()方法。若是是ViewGroup才须要调用dispatchDraw()对子view进行绘制，这里咱们能够看看ViewGroup中dispatchDraw()的实现：
@Override
protected void dispatchDraw(Canvas canvas) {
......
//遍历子控件，调用drawChild()方法
for (int i = 0; i < childrenCount; i++) {
while (transientIndex >= 0 && mTransientIndices.get(transientIndex) == i) {
final View transientChild = mTransientViews.get(transientIndex);
if ((transientChild.mViewFlags & VISIBILITY_MASK) == VISIBLE ||
transientChild.getAnimation() != null) {
more |= drawChild(canvas, transientChild, drawingTime);
}
transientIndex++;
if (transientIndex >= transientCount) {
transientIndex = -1;
}
}
......
}
}复制代码
由dispatchDraw（）中代码能够看到，对子view进行遍历，并调用drawChild()方法，最终递归调用View的draw(canvas)方法对子view进行绘制。
总结：
ViewGroup的绘制流程：
1.绘制背景：drawBackground(canvas)
2.绘制本身：onDraw(canvas)
3.绘制子View：dispatchView(canvas) 注：View的绘制流程没有这一步骤
4.绘制前景：滚动条等装饰onDrawForeground(canvas)
相关文章
- 1. Android View绘制的三大流程
- 2. View的绘制
- 3. UI绘制流程的三部曲----Draw
- 4. UI绘制流程的三部曲----Layout
- 5. Android View的绘制
- 6. View的绘制机制
- 7. Android的View绘制机制
- 8. View的绘制二：View的绘制流程
- 9. MATLAB绘图---三维图形的绘制
- 10. View绘制
- 更多相关文章...
- • Spring实例化Bean的三种方法 - Spring教程
- • MyBatis与Spring的整合步骤 - MyBatis教程
- • 漫谈MySQL的锁机制
- • Docker容器实战(六) - 容器的隔离与限制
相关标签/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
最新文章
- 1. python的安装和Hello，World编写
- 2. 重磅解读：K8s Cluster Autoscaler模块及对应华为云插件Deep Dive
- 3. 鸿蒙学习笔记2（永不断更）
- 4. static关键字 和构造代码块
- 5. JVM笔记
- 6. 无法启动 C/C++ 语言服务器。IntelliSense 功能将被禁用。错误: Missing binary at c:\Users\MSI-NB\.vscode\extensions\ms-vsc
- 7. 【Hive】Hive返回码状态含义
- 8. Java树形结构递归（以时间换空间）和非递归（以空间换时间）
- 9. 数据预处理---缺失值
- 10. 都要2021年了，现代C++有什么值得我们学习的？
欢迎关注本站公众号,获取更多信息
相关文章
- 1. Android View绘制的三大流程
- 2. View的绘制
- 3. UI绘制流程的三部曲----Draw
- 4. UI绘制流程的三部曲----Layout
- 5. Android View的绘制
- 6. View的绘制机制
- 7. Android的View绘制机制
- 8. View的绘制二：View的绘制流程
- 9. MATLAB绘图---三维图形的绘制
- 10. View绘制