Red Hat 6.3安装gcc gc++

首先安装gcc须要相应的rpm依赖包，在安装系统的镜像文件中就有这些rpm包

首先在光驱中选择系统的安装包载入

若是桌面显示有以下的光驱

说明是已经载入了镜像，这时候，须要挂载一下镜像到mnt目录

先在/mnt中建立一个文件夹 cdrom 

$    mkdir /mnt/cdrom

$    mount /dev/cdrom /mnt/cdrom

进入到 /mnt/cdrom目录

$    cd /mnt/cdrom

进入到Packages目录

$    cd Packages

使用以下命令查找相应的rpm包

$    ls -l |grep glibc 

• glibc-common-2.12-1.80.el6.x86_64.rpm
• glibc-2.12-1.80.el6.x86_64.rpm
• glibc-headers-2.12-1.80.el6.x86_64.rpm
• glibc-devel-2.12-1.80.el6.x86_64.rpm

$    ls -l |grep kernel 

• kernel-headers-2.6.32-279.el6.x86_64.rpm 

$    ls -l |grep libgcc

• libgcc-4.4.6-4.el6.x86_64.rpm  

$    ls -l |grep libgomp

• libgomp-4.4.6-4.el6.x86_64.rpm

$    ls -l |grep nscd

• nscd-2.12-1.80.el6.x86_64.rpm

$    ls -l |grep mpfr

• mpfr-2.4.1-6.el6.x86_64.rpm

$    ls -l |grep ppl

• ppl-0.10.2-11.el6.x86_64.rpm

$    ls -l |grep cloog

• cloog-ppl-0.15.7-1.2.el6.x86_64.rpm

$    ls -l |grep cpp

• cpp-4.4.6-4.el6.x86_64.rpm

$    ls -l |grep gcc

• gcc-4.4.6-4.el6.x86_64.rpm
• gcc-c++-4.4.6-4.el6.x86_64.rpm

$    ls -l |grep libstdc++-

• libstdc++-4.4.6-4.el6.x86_64.rpm
• libstdc++-devel-4.4.6-4.el6.x86_64.rpm

找到这些安装包以后，记住，必定要按照如下的顺序安装，不然可能会出现错误

rpm -ivh glibc-common-2.12-1.80.el6.x86_64.rpm

rpm -ivh kernel-headers-2.6.32-279.el6.x86_64.rpm

rpm -ivh libgcc-4.4.6-4.el6.x86_64.rpm

rpm -ivh glibc-2.12-1.80.el6.x86_64.rpm

rpm -ivh libgomp-4.4.6-4.el6.x86_64.rpm

rpm -ivh nscd-2.12-1.80.el6.x86_64.rpm

rpm -ivh glibc-headers-2.12-1.80.el6.x86_64.rpm

rpm -ivh glibc-devel-2.12-1.80.el6.x86_64.rpm

rpm -ivh mpfr-2.4.1-6.el6.x86_64.rpm

rpm -ivh ppl-0.10.2-11.el6.x86_64.rpm

rpm -ivh cloog-ppl-0.15.7-1.2.el6.x86_64.rpm

rpm -ivh cpp-4.4.6-4.el6.x86_64.rpm

rpm -ivh gcc-4.4.6-4.el6.x86_64.rpm

rpm -ivh libstdc++-4.4.6-4.el6.x86_64.rpm

rpm -ivh libstdc++-devel-4.4.6-4.el6.x86_64.rpm

rpm -ivh gcc-c++-4.4.6-4.el6.x86_64.rpm

最后经过which命令或者rpm -q 查看一下GCC是否已安装：

$    which gcc 
$    rpm -q gcc

结束后，最好是可以卸载镜像

$    umount /mnt/cdrom/