centos7.x网卡bond配置

时间 2019-12-06

标签 centos7.x centos 网卡 bond 配置栏目 CentOS 繁體版

原文原文链接

本文摘抄自 https://www.cnblogs.com/liwanggui/p/6807212.htmlhtml

centos7网卡bond配置

centos7网卡bond配置

1 备份网卡配置文件
2 使用nmcli命令配置bond
3 修改bond0网卡配置
4 重启网络，验证配置结果
5 删除 bond 设备
6 ifensalve 工具

实验环境linux

[root@localhost ~]# cat /etc/redhat-release
CentOSLinux release 7.2.1511(Core)
[root@localhost ~]# uname -r
3.10.0-327.el7.x86_64

linux服务器 eno33554960 与 eno50332184 两张网卡配置 bond 步骤（若是要配置多个bond0,1…按照这个流程重复操做便可）参考vim

查看网卡信息centos

 
         [root@localhost ~] 
         # ip addr 
        
         1: lo:<LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
        
         link 
         /loopback  
         00:00:00:00:00:00 brd 00:00:00:00:00:00 
        
         inet 127.0.0.1 
         /8  
         scope host lo 
        
         valid_lft forever preferred_lft forever 
        
         inet6 ::1 
         /128  
         scope host 
        
         valid_lft forever preferred_lft forever 
        
         2: eno16777736:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 
        
         link 
         /ether  
         00:0c:29:07:2c:86 brd ff:ff:ff:ff:ff:ff 
        
         inet 192.168.92.11 
         /24  
         brd 192.168.92.255 scope global eno16777736 
        
         valid_lft forever preferred_lft forever 
        
         inet6 fe80::20c:29ff:fe07:2c86 
         /64  
         scope link 
        
         valid_lft forever preferred_lft forever 
        
         3: eno33554960:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 
        
         link 
         /ether  
         00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff 
        
         4: eno50332184:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 
        
         link 
         /ether  
         00:0c:29:07:2c:9a brd ff:ff:ff:ff:ff:ff

1 备份网卡配置文件

 
         [root@localhost ~] 
         # cd /etc/sysconfig/network-scripts/ 
        
         [root@localhost network-scripts] 
         # mkdir /tmp/net_bak 
        
         [root@localhost network-scripts] 
         # cp ifcfg-*/tmp/net_bak/ 
        
         [root@localhost network-scripts] 
         # ls /tmp/net_bak/ 
        
         ifcfg-eno16777736 ifcfg-eno33554960 ifcfg-eno50332184 ifcfg-eno67109408 ifcfg-eno83886632 ifcfg-lo

2 使用nmcli命令配置bond

 
         # 生成bond配置文件 
        
         [root@localhost network-scripts] 
         # nmcli connection add type bond ifname bond0 mode 1 
        
         # 将网卡`eno33554960`与`eno50332184`绑定到bond0 
        
         [root@localhost network-scripts] 
         # nmcli connection add type bond-slave ifname eno33554960 master bond0 
        
         [root@localhost network-scripts] 
         # nmcli connection add type bond-slave ifname eno50332184 master bond0 
        
         # 查看生成的配置文件 
        
         [root@localhost network-scripts] 
         # ls ifcfg-bond-* 
        
         ifcfg-bond-bond0 ifcfg-bond-slave-eno33554960 ifcfg-bond-slave-eno50332184

bond的mode以下：bash

balance-rr (0) –轮询模式，负载均衡（bond默认的模式）
active-backup (1) –主备模式（经常使用）
balance-xor (2)
broadcast (3）
802.3ad (4) –聚合模式
balance-tlb (5)
balance-alb (6)

3 修改bond0网卡配置

 
         [root@localhost network-scripts] 
         # vim ifcfg-bond-bond0 
        
         DEVICE=bond0 
        
         BONDING_OPTS=mode=active-backup 
        
         TYPE=Bond 
        
         BONDING_MASTER= 
         yes 
        
         BOOTPROTO=static====>将 dhcp 改成static 
        
         DEFROUTE= 
         yes 
        
         PEERDNS= 
         yes 
        
         PEERROUTES= 
         yes 
        
         IPV4_FAILURE_FATAL=no 
        
         IPV6INIT= 
         yes 
        
         IPV6_AUTOCONF= 
         yes 
        
         IPV6_DEFROUTE= 
         yes 
        
         IPV6_PEERDNS= 
         yes 
        
         IPV6_PEERROUTES= 
         yes 
        
         IPV6_FAILURE_FATAL=no 
        
         NAME=bond-bond0 
        
         UUID=af2d6662-608c-4f5d-8018-1984cc3d87ef 
        
         ONBOOT= 
         yes 
        
         IPADDR=192.168.92.20 
         # 配置 IP 地址 
        
         PREFIX=24 
         # 配置掩码 也能够使用 NETMASK=255.255.255.0 
        
         GATEWAY=192.168.92.2 
         # 配置网关

Tips: 若是不想修改bond网络接口配置文件能够在第2步的第一条命令后加上 ip4 "ip地址" gw4 "网关地址"服务器
nmcli connection add type bond ifname bond0 mode 1 ip4 192.168.92.20/24 gw4 192.168.92.2

4 重启网络，验证配置结果

1. 查看网卡信息网络

[root@localhost network-scripts]# ip addr show
1: lo:<LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:07:2c:86 brd ff:ff:ff:ff:ff:ff
inet 192.168.92.11/24 brd 192.168.92.255 scope global eno16777736
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe07:2c86/64 scope link
valid_lft forever preferred_lft forever
3: eno33554960:<BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
link/ether 00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff
4: eno50332184:<BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
link/ether 00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff
31: bond0:<BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff
inet 192.168.92.20/24 brd 192.168.92.255 scope global bond0
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe07:2c90/64 scope link
valid_lft forever preferred_lft forever

2. 查看bond信息负载均衡

[root@localhost network-scripts]# cat /proc/net/bonding/bond0
EthernetChannelBondingDriver: v3.7.1(April27,2011)
BondingMode: fault-tolerance (active-backup)===> bond主备模式
PrimarySlave:None
CurrentlyActiveSlave: eno33554960 ===>当前激活的网卡eno33554960
MII Status: up
MII PollingInterval(ms):100
UpDelay(ms):0
DownDelay(ms):0
SlaveInterface: eno33554960 ===> bond0 组内的网卡
MII Status: up
Speed:1000Mbps
Duplex: full
LinkFailureCount:0
Permanent HW addr:00:0c:29:07:2c:90
Slave queue ID:0
SlaveInterface: eno50332184 ===> bond0 组内的网卡
MII Status: up
Speed:1000Mbps
Duplex: full
LinkFailureCount:0
Permanent HW addr:00:0c:29:07:2c:9a
Slave queue ID:0

5 删除 bond 设备

当咱们须要删除bond设备的时候,该如何删除呢？请看下面操做工具

1.查看网络设备oop

[root@localhost ~]# ls /sys/class/net/
bond0 bond1 bonding_masters eno16777736 eno33554960 eno50332184 eno67109408 eno83886632 lo

2.删除bond网络设备

直接删除bond0，会提示无权限。
能够经过bonding_masters文件删除bond设备,可是bonding_masters文件是没法直接修改的。

[root@localhost ~]# echo -bond0 >/sys/class/net/bonding_masters

echo 后面的 ‘-’ 是删除设备，‘+’是增长设备