ret = gpio_request(EXYNOS4_GPL2(0),"LEDS");
node
gpio_free(EXYNOS4_GPL2(0));linux
在probe 程序时,request 以后,记得须要在release 中释放。函数
#include <linux/init.h>spa
#include <linux/module.h>
/*驱动注册的头文件,包含驱动的结构体和注册和卸载的函数*/
#include <linux/platform_device.h>
/*注册杂项设备头文件*/
#include <linux/miscdevice.h>
/*注册设备节点的文件结构体*/
#include <linux/fs.h>
/*Linux中申请GPIO的头文件*/
#include <linux/gpio.h>
/*三星平台的GPIO配置函数头文件*/
/*三星平台EXYNOS系列平台,GPIO配置参数宏定义头文件*/
#include <plat/gpio-cfg.h>
#include <mach/gpio.h>
/*三星平台4412平台,GPIO宏定义头文件*/
#include <mach/gpio-exynos4.h>
#define DRIVER_NAME "hello"
#define DEVICE_NAME "hello"
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("blalbl");
static long hello_ioctl( struct file *files, unsigned int cmd, unsigned long arg){
printk("cmd is %d,arg is %ld\n",cmd,arg);
if(cmd < 1){
printk(KERN_EMERG " need the param \n");
return 0;
}
gpio_set_value(EXYNOS4_GPL2(0),arg);
return 0;
}
static int hello_release(struct inode *inode, struct file *file){
printk(KERN_EMERG "hello release\n");
return 0;
}
static int hello_open(struct inode *inode, struct file *file){
printk(KERN_EMERG "hello open\n");
return 0;
}
static struct file_operations hello_ops = {
.owner = THIS_MODULE,
.open = hello_open,
.release = hello_release,
.unlocked_ioctl = hello_ioctl,
};
static struct miscdevice hello_dev = {
.minor = MISC_DYNAMIC_MINOR,
.name = DEVICE_NAME,
.fops = &hello_ops,
};
static int hello_probe(struct platform_device *pdv){
int ret;
printk(KERN_EMERG "\tinitialized\n");
ret = gpio_request(EXYNOS4_GPL2(0),"LEDS");
if(ret < 0){
printk(KERN_EMERG "gpio_request EXYNOS4_GPL2(0) failed!\n");
return ret;
}
s3c_gpio_cfgpin(EXYNOS4_GPL2(0),S3C_GPIO_OUTPUT);
gpio_set_value(EXYNOS4_GPL2(0),0);
misc_register(&hello_dev);
return 0;
}
static int hello_remove(struct platform_device *pdv){
//gpio_free(EXYNOS4_GPL2(0));orm
/*资源
安装卸载后,从新安装,出现如下rem
[ 5073.916637] gpio_request EXYNOS4_GPL2(0) failed!
[ 5073.929300] hello: probe of hello failed with error -16
cmd
由于第一次安装模块时it
ret = gpio_request(EXYNOS4_GPL2(0),"LEDS");io
占用了该io 的资源
可是在卸载时,并无释放,致使资源一直被占用。
*/
printk(KERN_EMERG "\tremove\n"); misc_deregister(&hello_dev); return 0; } static void hello_shutdown(struct platform_device *pdv){ ; } static int hello_suspend(struct platform_device *pdv,pm_message_t pmt){ return 0; } static int hello_resume(struct platform_device *pdv){ return 0; } struct platform_driver hello_driver = { .probe = hello_probe, .remove = hello_remove, .shutdown = hello_shutdown, .suspend = hello_suspend, .resume = hello_resume, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, } }; static int hello_init(void) { int DriverState; printk(KERN_EMERG "HELLO WORLD enter!\n"); DriverState = platform_driver_register(&hello_driver); printk(KERN_EMERG "\tDriverState is %d\n",DriverState); return 0; } static void hello_exit(void) { printk(KERN_EMERG "HELLO WORLD exit!\n"); platform_driver_unregister(&hello_driver); } module_init(hello_init); module_exit(hello_exit);