Hystrix执行原理

前奏

Hystrix的常规使用姿式

@Test
    public void test_run(){
        String s = new CommandHelloWorld("Bob").execute();
        System.out.println(s);
    }

咱们的command在new的时候发生了什么？execute()是如何执行的？execute执行失败或者超时如何fallback?

1、PREPARE 初始化

当咱们new XXCommand()的时候，大部分的工做都是在 AbstractCommand完成

protected AbstractCommand(HystrixCommandGroupKey group, HystrixCommandKey key, HystrixThreadPoolKey threadPoolKey, HystrixCircuitBreaker circuitBreaker, HystrixThreadPool threadPool,
        HystrixCommandProperties.Setter commandPropertiesDefaults, HystrixThreadPoolProperties.Setter threadPoolPropertiesDefaults,
        HystrixCommandMetrics metrics, TryableSemaphore fallbackSemaphore, TryableSemaphore executionSemaphore,
        HystrixPropertiesStrategy propertiesStrategy, HystrixCommandExecutionHook executionHook) {

    this.commandGroup = initGroupKey(group);
    this.commandKey = initCommandKey(key, getClass());
    this.properties = initCommandProperties(this.commandKey, propertiesStrategy, commandPropertiesDefaults);
    this.threadPoolKey = initThreadPoolKey(threadPoolKey, this.commandGroup, this.properties.executionIsolationThreadPoolKeyOverride().get());
    this.metrics = initMetrics(metrics, this.commandGroup, this.threadPoolKey, this.commandKey, this.properties);
    this.circuitBreaker = initCircuitBreaker(this.properties.circuitBreakerEnabled().get(), circuitBreaker, this.commandGroup, this.commandKey, this.properties, this.metrics);
    this.threadPool = initThreadPool(threadPool, this.threadPoolKey, threadPoolPropertiesDefaults);

    //Strategies from plugins
    this.eventNotifier = HystrixPlugins.getInstance().getEventNotifier();
    this.concurrencyStrategy = HystrixPlugins.getInstance().getConcurrencyStrategy();
    HystrixMetricsPublisherFactory.createOrRetrievePublisherForCommand(this.commandKey, this.commandGroup, this.metrics, this.circuitBreaker, this.properties);
    this.executionHook = initExecutionHook(executionHook);

    this.requestCache = HystrixRequestCache.getInstance(this.commandKey, this.concurrencyStrategy);
    this.currentRequestLog = initRequestLog(this.properties.requestLogEnabled().get(), this.concurrencyStrategy);

    /* fallback semaphore override if applicable */
    this.fallbackSemaphoreOverride = fallbackSemaphore;

    /* execution semaphore override if applicable */
    this.executionSemaphoreOverride = executionSemaphore;
}

能够很清晰的看到，这里面在进行command配置装载、线程池配置装载及线程池的建立、指标搜集器、熔断器的初始化等等。

//HystrixCommandMetrics
ConcurrentHashMap<String, HystrixCommandMetrics> metrics = new ConcurrentHashMap<String, HystrixCommandMetrics>();

//HystrixThreadPoolDefault
final static ConcurrentHashMap<String, HystrixThreadPool> threadPools = new ConcurrentHashMap<String, HystrixThreadPool>();

//com.netflix.hystrix.HystrixCircuitBreaker.Factory
private static ConcurrentHashMap<String, HystrixCircuitBreaker> circuitBreakersByCommand = new ConcurrentHashMap<String, HystrixCircuitBreaker>();

除HystrixCommand每次都须要从新创建，其它基本都以commandKey维护着配置，熔断器，指标的单例而线程池则以threadkey进场存储。

咱们能够了了解下Hystrix的线程池如何管理
建立线程调用 HystrixThreadPool.Factory.getInstance

static HystrixThreadPool getInstance(HystrixThreadPoolKey threadPoolKey, HystrixThreadPoolProperties.Setter propertiesBuilder) {
    // get the key to use instead of using the object itself so that if people forget to implement equals/hashcode things will still work
    String key = threadPoolKey.name();

    // this should find it for all but the first time
    HystrixThreadPool previouslyCached = threadPools.get(key);
    if (previouslyCached != null) {
        return previouslyCached;
    }

    // if we get here this is the first time so we need to initialize
    synchronized (HystrixThreadPool.class) {
        if (!threadPools.containsKey(key)) {
            threadPools.put(key, new HystrixThreadPoolDefault(threadPoolKey, propertiesBuilder));
        }
    }
    return threadPools.get(key);
}

从缓存中以threadPoolKey获取线程池，获取不到则 调用new HystrixThreadPoolDefault新建

public HystrixThreadPoolDefault(HystrixThreadPoolKey threadPoolKey, HystrixThreadPoolProperties.Setter propertiesDefaults) {
    this.properties = HystrixPropertiesFactory.getThreadPoolProperties(threadPoolKey, propertiesDefaults);
    HystrixConcurrencyStrategy concurrencyStrategy = HystrixPlugins.getInstance().getConcurrencyStrategy();
    this.queueSize = properties.maxQueueSize().get();

    this.metrics = HystrixThreadPoolMetrics.getInstance(threadPoolKey,
            concurrencyStrategy.getThreadPool(threadPoolKey, properties),
            properties);
    this.threadPool = this.metrics.getThreadPool();
    this.queue = this.threadPool.getQueue();

    /* strategy: HystrixMetricsPublisherThreadPool */
    HystrixMetricsPublisherFactory.createOrRetrievePublisherForThreadPool(threadPoolKey, this.metrics, this.properties);
}

注意

this.metrics = HystrixThreadPoolMetrics.getInstance(threadPoolKey,concurrencyStrategy.getThreadPool(threadPoolKey, properties),properties);

其中 concurrencyStrategy.getThreadPool，HystrixConcurrencyStrategy就是hystrix的线程建立策略者

真正的建立线程执行
HystrixConcurrencyStrategy#getThreadPool

public ThreadPoolExecutor getThreadPool(final HystrixThreadPoolKey threadPoolKey, HystrixThreadPoolProperties threadPoolProperties) {
    .....各类配置，此处代码省略......

    if (allowMaximumSizeToDivergeFromCoreSize) {
        final int dynamicMaximumSize = threadPoolProperties.maximumSize().get();
        if (dynamicCoreSize > dynamicMaximumSize) {
            logger.error("Hystrix ThreadPool configuration at startup for : " + threadPoolKey.name() + " is trying to set coreSize = " +
                    dynamicCoreSize + " and maximumSize = " + dynamicMaximumSize + ".  Maximum size will be set to " +
                    dynamicCoreSize + ", the coreSize value, since it must be equal to or greater than the coreSize value");
            return new ThreadPoolExecutor(dynamicCoreSize, dynamicCoreSize, keepAliveTime, TimeUnit.MINUTES, workQueue, threadFactory);
        } else {
            return new ThreadPoolExecutor(dynamicCoreSize, dynamicMaximumSize, keepAliveTime, TimeUnit.MINUTES, workQueue, threadFactory);
        }
    } else {
        return new ThreadPoolExecutor(dynamicCoreSize, dynamicCoreSize, keepAliveTime, TimeUnit.MINUTES, workQueue, threadFactory);
    }
}

这里调用java JUC原生的 ThreadPoolExecutor建立线程

2、Observable 大串烧

Hystrix的执行利用RxJava，组合了不少的Observable，造成一个Observable，和传统的调用链相比更加简洁。

3、各色Observable显神通

3.1.command 状态位

1. toObservable 第一个observable，在下一个chain以前，会更改HystrixCommand状态位 OBSERVABLE_CHAIN_CREATED
2. toObservable doOnTerminate，探测到terminate时，会将HystrixCommand更改成 TERMINAL
3. executeCommandWithSpecifiedIsolation在开始执行的时候会更改HystrixCommand更改成 USER_CODE_EXECUTED
4. toObservable doOnUnsubscribe，探测到terminate时，会将HystrixCommand更改成 UNSUBSCRIBED

3.2.executeCommandWithSpecifiedIsolation

分配执行线程，维护线程状态

private Observable<R> executeCommandWithSpecifiedIsolation(final AbstractCommand<R> _cmd) {
    if (properties.executionIsolationStrategy().get() == ExecutionIsolationStrategy.THREAD) {
        // mark that we are executing in a thread (even if we end up being rejected we still were a THREAD execution and not SEMAPHORE)
        return Observable.defer(new Func0<Observable<R>>() {
            @Override
            public Observable<R> call() {
                .....省略干扰代码.....
                if (!commandState.compareAndSet(CommandState.OBSERVABLE_CHAIN_CREATED, CommandState.USER_CODE_EXECUTED)) {
                    return Observable.error(new IllegalStateException("execution attempted while in state : " + commandState.get().name()));
                }

                if (isCommandTimedOut.get() == TimedOutStatus.TIMED_OUT) {
                        // the command timed out in the wrapping thread so we will return immediately
                        // and not increment any of the counters below or other such logic
                        return Observable.error(new RuntimeException("timed out before executing run()"));
                    }
                
                if (threadState.compareAndSet(ThreadState.NOT_USING_THREAD, ThreadState.STARTED)) {

                    try {
                       .....省略干扰代码.....

                        return getUserExecutionObservable(_cmd);
                    } catch (Throwable ex) {
                        return Observable.error(ex);
                    }
                } else {
                    //command has already been unsubscribed, so return immediately
                    return Observable.error(new RuntimeException("unsubscribed before executing run()"));
                }
            }
        }).doOnTerminate(new Action0() {
            @Override
            public void call() {
                if (threadState.compareAndSet(ThreadState.STARTED, ThreadState.TERMINAL)) {
                    handleThreadEnd(_cmd);
                }
                if (threadState.compareAndSet(ThreadState.NOT_USING_THREAD, ThreadState.TERMINAL)) {
                    //if it was never started and received terminal, then no need to clean up (I don't think this is possible)
                }
                //if it was unsubscribed, then other cleanup handled it
            }
        }).doOnUnsubscribe(new Action0() {
            @Override
            public void call() {
                if (threadState.compareAndSet(ThreadState.STARTED, ThreadState.UNSUBSCRIBED)) {
                    handleThreadEnd(_cmd);
                }
                if (threadState.compareAndSet(ThreadState.NOT_USING_THREAD, ThreadState.UNSUBSCRIBED)) {
                    //if it was never started and was cancelled, then no need to clean up
                }
                //if it was terminal, then other cleanup handled it
            }
        }).subscribeOn(threadPool.getScheduler(new Func0<Boolean>() {
            @Override
            public Boolean call() {
                return properties.executionIsolationThreadInterruptOnTimeout().get() && _cmd.isCommandTimedOut.get() == TimedOutStatus.TIMED_OUT;
            }
        }));
    } else {
        .....省略干扰代码.....
    }
}

具体逻辑
1.判断隔离策略，若是是Semaphore 信号量则在当前线程上执行，不然进入线程分配逻辑
2.更改HystrixCommand的状态 USER_CODE_EXECUTED
3.判断HystrixCommand超时状态，若是已经超时则抛出异常
4.更改当前command的线程执行状态为 STARTED
5.调用 getUserExecutionObservable 执行具体逻辑
6.doOnTerminate 当Observale执行完毕后(HystrixCommand可能失败也可能执行成功)，此时的线程状态可能有两种分别是 STARTED 和 NOT_USING_THREAD ， 而后更改线程状态为 TERMINAL
7.doOnUnsubscribe 当Observable被取消订阅，更改线程状态为 TERMINAL
8.subscribeOn 指定scheduler，这里Hystrix实现了本身的scheduler，在scheduler的worker指定线程池，在配置线程以前会从新加载线程池配置（这里是Rxjava的东西，暂时你们能够粗略的认为这里就是指定线程池，而后把要执行的任务扔到这个线程池里）

@Override
public Scheduler getScheduler(Func0<Boolean> shouldInterruptThread) {
    touchConfig();
    return new HystrixContextScheduler(HystrixPlugins.getInstance().getConcurrencyStrategy(), this, shouldInterruptThread);
}

// allow us to change things via fast-properties by setting it each time
private void touchConfig() {
    final int dynamicCoreSize = properties.coreSize().get();
    final int configuredMaximumSize = properties.maximumSize().get();
    int dynamicMaximumSize = properties.actualMaximumSize();
    final boolean allowSizesToDiverge = properties.getAllowMaximumSizeToDivergeFromCoreSize().get();
    boolean maxTooLow = false;

    if (allowSizesToDiverge && configuredMaximumSize < dynamicCoreSize) {
        //if user sets maximum < core (or defaults get us there), we need to maintain invariant of core <= maximum
        dynamicMaximumSize = dynamicCoreSize;
        maxTooLow = true;
    }

    // In JDK 6, setCorePoolSize and setMaximumPoolSize will execute a lock operation. Avoid them if the pool size is not changed.
    if (threadPool.getCorePoolSize() != dynamicCoreSize || (allowSizesToDiverge && threadPool.getMaximumPoolSize() != dynamicMaximumSize)) {
        if (maxTooLow) {
            logger.error("Hystrix ThreadPool configuration for : " + metrics.getThreadPoolKey().name() + " is trying to set coreSize = " +
                    dynamicCoreSize + " and maximumSize = " + configuredMaximumSize + ".  Maximum size will be set to " +
                    dynamicMaximumSize + ", the coreSize value, since it must be equal to or greater than the coreSize value");
        }
        threadPool.setCorePoolSize(dynamicCoreSize);
        threadPool.setMaximumPoolSize(dynamicMaximumSize);
    }

    threadPool.setKeepAliveTime(properties.keepAliveTimeMinutes().get(), TimeUnit.MINUTES);
}

touchConfig 执行具体的线程池参数调整。

从上面的过程也能发现，该observable也是维护线程状态的地方，线程的状态变动见下图

3.3.getUserExecutionObservable

执行具体业务逻辑

private Observable<R> getUserExecutionObservable(final AbstractCommand<R> _cmd) {
    Observable<R> userObservable;

    try {
        userObservable = getExecutionObservable();
    } catch (Throwable ex) {
        // the run() method is a user provided implementation so can throw instead of using Observable.onError
        // so we catch it here and turn it into Observable.error
        userObservable = Observable.error(ex);
    }

    return userObservable
            .lift(new ExecutionHookApplication(_cmd))
            .lift(new DeprecatedOnRunHookApplication(_cmd));
}

userObservable = getExecutionObservable(); 由HystrixCommand本身实现

//HystrixCommand
final protected Observable<R> getExecutionObservable() {
    return Observable.defer(new Func0<Observable<R>>() {
        @Override
        public Observable<R> call() {
            try {
                return Observable.just(run());
            } catch (Throwable ex) {
                return Observable.error(ex);
            }
        }
    }).doOnSubscribe(new Action0() {
        @Override
        public void call() {
            // Save thread on which we get subscribed so that we can interrupt it later if needed
            executionThread.set(Thread.currentThread());
        }
    });
}

这里看到 run()应该就明白了，就是咱们本身的业务代码 CommandHelloWorld去实现的。

3.4.getFallbackOrThrowException

当executeCommandWithSpecifiedIsolation探测到异常时触发该Observable。getFallbackOrThrowException里具体fallback执行看
executeCommandAndObserve。

private Observable<R> executeCommandAndObserve(final AbstractCommand<R> _cmd) {
    .....省略干扰代码.....
    final Func1<Throwable, Observable<R>> handleFallback = new Func1<Throwable, Observable<R>>() {
        .....省略干扰代码.....
    };

    .....省略干扰代码.....

    Observable<R> execution;
    if (properties.executionTimeoutEnabled().get()) {
        execution = executeCommandWithSpecifiedIsolation(_cmd)
                .lift(new HystrixObservableTimeoutOperator<R>(_cmd));
    } else {
        execution = executeCommandWithSpecifiedIsolation(_cmd);
    }

    return execution.doOnNext(markEmits)
            .doOnCompleted(markOnCompleted)
            .onErrorResumeNext(handleFallback)
            .doOnEach(setRequestContext);
}

doErrorResumeNext 会触发下一个 handleFallback。

private Observable<R> getFallbackOrThrowException(final AbstractCommand<R> _cmd, final HystrixEventType eventType, final FailureType failureType, final String message, final Exception originalException) {
    ....省略干扰代码....

    if (isUnrecoverable(originalException)) {
        ....省略干扰代码....
    } else {
        ....省略干扰代码....

        if (properties.fallbackEnabled().get()) {
        
            ....省略干扰代码....

            Observable<R> fallbackExecutionChain;

            // acquire a permit
            if (fallbackSemaphore.tryAcquire()) {
                try {
                    if (isFallbackUserDefined()) {
                        executionHook.onFallbackStart(this);
                        fallbackExecutionChain = getFallbackObservable();
                    } else {
                        //same logic as above without the hook invocation
                        fallbackExecutionChain = getFallbackObservable();
                    }
                } catch (Throwable ex) {
                    //If hook or user-fallback throws, then use that as the result of the fallback lookup
                    fallbackExecutionChain = Observable.error(ex);
                }

                return fallbackExecutionChain
                        .doOnEach(setRequestContext)
                        .lift(new FallbackHookApplication(_cmd))
                        .lift(new DeprecatedOnFallbackHookApplication(_cmd))
                        .doOnNext(markFallbackEmit)
                        .doOnCompleted(markFallbackCompleted)
                        .onErrorResumeNext(handleFallbackError)
                        .doOnTerminate(singleSemaphoreRelease)
                        .doOnUnsubscribe(singleSemaphoreRelease);
            } else {
               return handleFallbackRejectionByEmittingError();
            }
        } else {
            return handleFallbackDisabledByEmittingError(originalException, failureType, message);
        }
    }
}

这里优先几个步骤
1.判断异常是不是能走fallback处理，不能则抛出HystrixRuntimeException
2.判断配置是否开启容许fallback，开启，则进入 getFallbackObservable()，而该方法具体有HystrixCommand实现，调用的则是用户的Command的fallback方法，若是调用方没有覆盖该方法，则会执行HystrixCommand的fallback方法，抛出未定义fallback方法的异常

protected R getFallback() {
    throw new UnsupportedOperationException("No fallback available.");
 }

@Override
final protected Observable<R> getFallbackObservable() {
    return Observable.defer(new Func0<Observable<R>>() {
        @Override
        public Observable<R> call() {
            try {
               //调用方 fallback逻辑
                return Observable.just(getFallback());
            } catch (Throwable ex) {
                return Observable.error(ex);
            }
        }
    });
}

后续系列文章，欢迎参阅
Hystrix熔断器执行机制
Hystrix超时实现机制