详谈kubernetes滚动更新-1

时间 2019-11-11

标签详谈 kubernetes 滚动更新繁體版

原文原文链接

系列目录html

这个系列分为两个小节,第一个小节介绍deployment滚动更新时，deployment、replicaset、pod的细节以及建立过程以及deployment版本管理的方式node

第二个小节将介绍滚动更新过程当中最大可用、liveness以及readiness等linux

咱们在阿里云上有两个不一样版本的镜像用于测试,使用docker pull把它拉取到本地nginx

docker pull registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v1
docker pull registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v2

截至目前,咱们并无详细介绍过docker的操做,可是目前市面上已经有不少书籍和博客介绍docker的基本操做,没有docker操做经验的能够关注一些入门教程.docker

root@k8s-master:~# docker run -d  -p 10080:80 nginx:v1
e88097841c5feef92e4285a2448b943934ade5d86412946bc8d86e262f80a050
root@k8s-master:~# curl http://127.0.0.1:10080
----------
version: v1
hostname: f5189a5d3ad3

注在linux里若是是以root用户登录,则命令行前一个#标识,这里并非注释的意思,还请注意api

deployment、replicaset、pod之间的关系

+------------+
                           | deployment |
                           +-----+------+
                                 |
                                 |
                                 |
                                 |
       +--------------------------------------------------+
       |                         |                        |
       |                         |                        |
       |                         |                        |
       |                         |                        |
       |                         |                        |
       |                         |                        |
+------v------+           +------v------+          +------v------+
|replicaset:v1|           |replicaset:v2|          |replicaset:v3|
+-------------+           +------+------+          +-------------+
                                 |
                                 |
                        +--------+---------+
                        |                  |
                        |                  |
                    +---v---+          +---v---+
                    |pod:v2 |          |pod:v2 |
                    +-------+          +-------+

deployment调度replicaset，pod由replicaset调度
deployment管理多个replicaset版本，可用于回滚
replicaset控制pod的行为，包括新增pod、删除pod

咱们首先准备一个yaml文件用于测试：bash

root@k8s-master:~# more roll_update.yaml
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: image-deployment
spec:
  replicas: 1
  template:
    metadata:
      labels:
        app: image-update
    spec:
      containers:
      - name: nginx
        image: registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v1
        imagePullPolicy: Always

简单验证一下：app

root@k8s-master:~# kubectl apply -f roll_update.yaml
deployment.extensions "update-deployment" created

root@k8s-master:~# kubectl get deploy
NAME                DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
update-deployment   3         3         3            3           54s
root@k8s-master:~# kubectl get rs
NAME                           DESIRED   CURRENT   READY     AGE
update-deployment-7db77f7cc6   3         3         3         56s
root@k8s-master:~# kubectl get pod
NAME                                 READY     STATUS    RESTARTS   AGE
update-deployment-7db77f7cc6-7j49g   1/1       Running   0          1m
update-deployment-7db77f7cc6-b75wn   1/1       Running   0          1m
update-deployment-7db77f7cc6-cfnt5   1/1       Running   0          1m

deployment、replicaset、pod都已经正常启动，下面分析一下他们的行为：curl

deploymentide

root@k8s-master:~# kubectl describe deploy update-deployment
Name:                   update-deployment
Namespace:              default
...
Replicas:               3 desired | 3 updated | 3 total | 3 available | 0 unavailable
StrategyType:           RollingUpdate
MinReadySeconds:        0
RollingUpdateStrategy:  1 max unavailable, 1 max surge
...
NewReplicaSet:   update-deployment-7db77f7cc6 (3/3 replicas created)
Events:
  Type    Reason             Age   From                   Message
  ----    ------             ----  ----                   -------
  Normal  ScalingReplicaSet  1m    deployment-controller  Scaled up replica set update-deployment-7db77f7cc6 to 3

deployment建立了一个replicaset，叫作update-deployment-7db77f7cc6（7db77f7cc6是replicaset的template hash值）
根据配置文件的要求，replicaset的副本数为3

replicaset

root@k8s-master:~# kubectl describe rs update-deployment-7db77f7cc6
Name:           update-deployment-7db77f7cc6
Namespace:      default
...
Controlled By:  Deployment/update-deployment
Replicas:       3 current / 3 desired
Pods Status:    3 Running / 0 Waiting / 0 Succeeded / 0 Failed
...
Events:
  Type    Reason            Age   From                   Message
  ----    ------            ----  ----                   -------
  Normal  SuccessfulCreate  3m    replicaset-controller  Created pod: update-deployment-7db77f7cc6-7j49g
  Normal  SuccessfulCreate  3m    replicaset-controller  Created pod: update-deployment-7db77f7cc6-b75wn
  Normal  SuccessfulCreate  3m    replicaset-controller  Created pod: update-deployment-7db77f7cc6-cfnt5

replicaset建立了3个pod

pod

root@k8s-master:~# kubectl describe pod update-deployment-7db77f7cc6-7j49g
Name:           update-deployment-7db77f7cc6-7j49g
Namespace:      default
...
Status:         Running
IP:             10.10.169.140
Controlled By:  ReplicaSet/update-deployment-7db77f7cc6
...
Events:
  Type    Reason                 Age   From                Message
  ----    ------                 ----  ----                -------
  Normal  Scheduled              9m    default-scheduler   Successfully assigned update-deployment-7db77f7cc6-7j49g to k8s-node2
  Normal  SuccessfulMountVolume  9m    kubelet, k8s-node2  MountVolume.SetUp succeeded for volume "default-token-v9nkm"
  Normal  Pulling                9m    kubelet, k8s-node2  pulling image "registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v1"
  Normal  Pulled                 9m    kubelet, k8s-node2  Successfully pulled image "registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v1"
  Normal  Created                9m    kubelet, k8s-node2  Created container
  Normal  Started                9m    kubelet, k8s-node2  Started container

pod被replicaset建立以后，开始分配到worker节点、拉取镜像、启动容器等一系列操做
因此pod的命名方式是：update-deployment-7db77f7cc6-7j49g（deployment名字-replicaset模板hash名字-pod模板hash名字）

你们可能不由会有疑问，为何搞这么复杂，启动一个pod须要动用这么多组件呢？下面用一个场景说明为啥须要这么多组件：

镜像版本更新

当镜像版本有更新时（三种方法均可以实现，参考前一篇文章：更新k8s镜像版本的三种方式），既要保证服务可用，又要保证在线更新，流程应该是：
1) 先增长一个pod，镜像版本为新版本
2) pod可用以后，删除一个老版本pod
3) 循环第一、2步，直到老版本pod所有删除，新版本的pod所有可用
上述的这个过程就是replicaset的做用，它根据需求，自动的增长新版本pod，而后删除老版本pod，直到老版本pod所有删除，新版本的pod所有可用
若是此时版本须要回退，那replicaset须要把刚才的步骤逆向更新一遍，实现版本回退
deployment的做用就是管理replicaset。deployment会保存各个版本的replicaset，一旦须要进行版本回滚，deployment会当即回滚replicaset的版本，从而控制pod状态

下面测试一下：

使用patch命令更新镜像版本，而且使用pause命令来观察：

root@k8s-master:~# kubectl patch deployment update-deployment \
--patch '{"spec": {"template": {"spec": {"containers": [{"name": "nginx","image":"registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v2"}]}}}}' \
&& kubectl rollout pause deployment update-deployment
deployment.extensions "update-deployment" patched
deployment.apps "update-deployment" paused

此时pod状态：

root@k8s-master:~# kubectl get pod -owide
NAME                                 READY     STATUS        RESTARTS   AGE       IP              NODE
update-deployment-7db77f7cc6-7j49g   1/1       Running       0          1h        10.10.169.140   k8s-node2
update-deployment-7db77f7cc6-b75wn   1/1       Running       0          1h        10.10.235.211   k8s-master
update-deployment-7db77f7cc6-cfnt5   1/1       Terminating   0          1h        10.10.36.126    k8s-node1
update-deployment-7fb7b4b557-6987x   1/1       Running       0          7s        10.10.36.127    k8s-node1
update-deployment-7fb7b4b557-dxdqb   1/1       Running       0          10s       10.10.169.139   k8s-node2

新增了2个pod，而删除了1个老版本的pod

此时replicaset状态：

root@k8s-master:~# kubectl get rs -owide
NAME                           DESIRED   CURRENT   READY     AGE       CONTAINERS   IMAGES                                                   SELECTOR
update-deployment-7db77f7cc6   2         2         2         1h        nginx        registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v1   app=roll-update,pod-template-hash=3863393772
update-deployment-7fb7b4b557   2         2         2         4m        nginx        registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v2   app=roll-update,pod-template-hash=3963606113

有一个新版本的replicaset建立了出来，而且需求的pod数量为2，而原来的replicaset需求的pod数量从3降为2

查看replicaset版本：

root@k8s-master:~# kubectl rollout history deploy update-deployment
deployments "update-deployment"
REVISION  CHANGE-CAUSE
1         <none>
2         update version to v2

新增了一个版本2

因为使用pause命令，更新过程到此会卡主，咱们让更新的过程继续下去：

root@k8s-master:~# kubectl rollout resume deployment update-deployment
deployment.apps "update-deployment" resumed

查看状态：

root@k8s-master:~# kubectl get pod
NAME                                 READY     STATUS    RESTARTS   AGE
update-deployment-7fb7b4b557-6987x   1/1       Running   0          15m
update-deployment-7fb7b4b557-dxdqb   1/1       Running   0          15m
update-deployment-7fb7b4b557-wg5c8   1/1       Running   0          1m
root@k8s-master:~# kubectl get rs -owide
NAME                           DESIRED   CURRENT   READY     AGE       CONTAINERS   IMAGES                                                   SELECTOR
update-deployment-7db77f7cc6   0         0         0         1h        nginx        registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v1   app=roll-update,pod-template-hash=3863393772
update-deployment-7fb7b4b557   3         3         3         14m       nginx        registry.cn-beijing.aliyuncs.com/mrvolleyball/nginx:v2   app=roll-update,pod-template-hash=3963606113

v1版本的replicaset已经没有pod，可是历史记录仍是保留的，能够经过deployment调度快速回滚