Ubuntu安装FreeSWITCH亲测

本人在安装FreeSWITCH的时候遇到了至关多的坑，网上不少方法都模棱两可，常常装失败，最后终于装成功后作一下总结

最顺利的安装方式

1. 下载压缩文件
　　下载地址：http://files.freeswitch.org/freeswitch-releases/    我选择的下载版本是freeswitch-1.8.5.tar.xz ，下载完成后解压缩

 

2. 安装依赖包

apt-get update

apt-get install  -y autoconf git libtool g++ zlib1g-dev libjpeg-dev libsqlite3-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libldns-dev libedit-dev libssl-dev pkg-config yasm liblua50-dev libopus-dev libsndfile1-dev libpq-dev libreadline-dev lua5.2 lua5.2-doc liblua5.2-dev libtiff5 libtiff5-dev

sudo apt-get install -y vim
sudo apt-get install -y g++
sudo apt-get install -y zlib1g-dev
sudo apt-get install -y libjpeg-dev
sudo apt-get install -y libsqlite3-dev
sudo apt-get install -y libcurl4-gnutls-dev
sudo apt-get install -y libpcre3-dev
sudo apt-get install -y libspeexdsp-dev
sudo apt-get install -y libedit-dev
sudo apt-get install -y libssl-dev
sudo apt-get install -y libopus-dev
sudo apt-get install -y liblua5.2-dev
sudo apt-get install -y libldns-dev
sudo apt-get install -y libsndfile1-dev 

 

3. 编译安装

# 切换路径到第一步解压缩的文件夹下
./configure

make
make install

 

4. 安装声音文件

# 安装声音文件 
make sounds-install
make moh-install

# 如下高质量的声音文件可选择安装
make cd-sounds-install
make cd-moh-install

 

若是一切顺利的话就安装好了，可是事实每每不那么容易，以后会列举几个会遇到的问题及解决方案

制做软链接

ln -sf /usr/local/freeswitch/bin/freeswitch /usr/bin/
ln -sf /usr/local/freeswitch/bin/fs_cli /usr/bin/

 

启动FreeSWITCH

freeswitch

 

关闭FreeSWITCH

shutdown

 

可能遇到的问题及解决方案

报错：

make[4]: Entering directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:930: *** You must install libks to build mod_signalwire.  Stop.
make[4]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:683: recipe for target 'mod_signalwire-all' failed
make[3]: *** [mod_signalwire-all] Error 1
make[3]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod'
Makefile:591: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/home/root/code/freeswitch-1.8.5/src'
Makefile:3494: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/root/code/freeswitch-1.8.5'
Makefile:1255: recipe for target 'all' failed
make: *** [all] Error 2

• 解决步骤以下：

# 下载并编译libks
cd /usr/local/src
git clone https://github.com/signalwire/libks.git
cd libks
cmake .

 

这时很大可能会遇到下面这个问题：

报错：

-- Checking for module 'uuid'
--   No package 'uuid' found
CMake Error at /home/root/tools/cmake-3.13.3-Linux-x86_64/share/cmake-3.13/Modules/FindPkgConfig.cmake:452 (message):
  A required package was not found
Call Stack (most recent call first):
  /home/root/tools/cmake-3.13.3-Linux-x86_64/share/cmake-3.13/Modules/FindPkgConfig.cmake:622 (_pkg_check_modules_internal)
  cmake/FindUUID.cmake:15 (pkg_check_modules)
  CMakeLists.txt:294 (include)


-- Configuring incomplete, errors occurred!
See also "/home/root/code/libks/CMakeFiles/CMakeOutput.log".
See also "/home/root/code/libks/CMakeFiles/CMakeError.log".

• 解决步骤以下

# 解决方法：下载并编译libuuid源码
https://jaist.dl.sourceforge.net/project/libuuid/libuuid-1.0.3.tar.gz

./configure
make
make install
# 从新执行libks的
cmake .
#### 问题解决。而后执行libks的
make
make install
 

 

报错：

make[4]: Entering directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:930: *** You must install signalwireto build mod_signalwire.  Stop.
make[4]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:683: recipe for target 'mod_signalwire-all' failed
make[3]: *** [mod_signalwire-all] Error 1
make[3]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod'
Makefile:591: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/home/root/code/freeswitch-1.8.5/src'
Makefile:3494: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/root/code/freeswitch-1.8.5'
Makefile:1255: recipe for target 'all' failed
make: *** [all] Error 2

• 解决方法以下

# 解决方法：下载并编译signalwire-c
cd /usr/local/src
git clone https://github.com/signalwire/signalwire-c.git
cd signalwire-c
cmake .
make
make install

 

这时有可能会出现问题：

报错：

CMake Error at CMakeLists.txt:168 (string):
  string sub-command REPLACE requires at least four arguments.


-- Configuring incomplete, errors occurred!
See also "/home/root/code/signalwire-c/CMakeFiles/CMakeOutput.log".

• 解决方法以下

# 阅读CMakeLists.txt，发现出问题的地方是使用git命令生成changelog的。对编译代码无影响。注释掉相关内容：

# Get git log info
#execute_process(COMMAND ${GIT_EXECUTABLE} log --no-merges --pretty=format:"%n  [%an]%n   * %s" --since="last month"
#        OUTPUT_VARIABLE CHANGELOG
#        WORKING_DIRECTORY .
#        OUTPUT_STRIP_TRAILING_WHITESPACE)
#string(REPLACE "\"" "" CHANGELOG ${CHANGELOG})

## Create changelog
#file(WRITE changelog.Debian ${CHANGELOG_HEADER}\n${CHANGELOG}\n\n${CHANGELOG_FOOTER})
#execute_process(COMMAND ${GZIP_CMD} -f -9 -n changelog.Debian)

# Install changelog
#install(FILES "${CMAKE_BINARY_DIR}/changelog.Debian.gz" COMPONENT "runtime" DESTINATION "share/doc/${CPACK_DEBIAN_PACKAGE_NAME}")


# 在signalwire下从新执行 
cmake . 
make
make install
 

 

接下来到freeswitch目录下

make clean # 清除上次编译的中间文件

# 从新执行FreeSWITCH的
./configure
make 
make install

 

 

若遇到启动freeswitch报错

'''
[ERR] mod_local_stream.c:360 Can't open /usr/local/freeswitch/sounds/music/8000/danza-espanola-op-37-h-142-xii-arabesca.wav
[ERR] switch_core_file.c:304 Invalid file format [wav] for [/usr/local/freeswitch/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav]!
[ERR] mod_local_stream.c:360 Can't open /usr/local/freeswitch/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav
.........................
.........................
'''

• 解决方法以下

1.先到 http://files.freeswitch.org/releases/sounds/ 下载原始的语音文件，freeswitch-sounds-zh-cn-sinmei-48000-1.0.51.tar.gz
2.用root用户在 /usr/local/freeswitch/sounds 下解压。该路径应该是 freeswitch 安装路径下的音频路径。能够先检查该路径下是否有英文语音文件。确认没有问题后解压。
3.进去报错的路径下  /usr/local/freeswitch/sounds/  删除music文件夹。
4.运行 sudo freeswitch 测试是否能正常运行
5.若是不能正常运行，则须要根据 https://www.jianshu.com/p/3400fdd29fb5 里面的3-7步设置一下。

参考：https://www.jianshu.com/p/3400fdd29fb5

 

参考：https://blog.csdn.net/shzwfq/article/details/88716584