smokeping 安装流程

yum -y install httpd-devel libxml2-devel libpng-devel glib pango pango-devel freetype freetype-devel fontconfig cairo cairo-devel libart_lgpl libart_lgpl-devel

安装rrdtool 1.4.7

wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.7.tar.gz

tar zxvf rrdtool-1.4.7.tar.gz

cd rrdtool-1.4.7

./configure --prefix=/usr/local/rrdtool

make && make install

安装cgilib

  wget http://down1.chinaunix.net/distfiles/cgilib-0.5.tar.gz 

tar zxvf cgilib-0.5.tar.gz

cd cgilib-0.5

make

cp libcgi.a /usr/local/lib

cp cgi.h /usr/include

安装fping-2.4b2_to

wget http://fping.sourceforge.net/download/fping.tar.gz

tar zxvf fping.tar.gz

cd fping-2.4b2_to

./configure

make

make check

make install

安装echoping

wget http://jaist.dl.sourceforge.net/project/echoping/echoping/6.0.0/echoping-6.0.0.tar.gz

tar zxvf echoping-6.0.0.tar.gz

cd echoping-6.0.0

./configure --without-libidn

make

make test  #遇到测试不成功等信息也不要紧,直接ctrl+c回到命令行

make install

安装FCGI

wget http://cpan.communilink.net/authors/id/F/FL/FLORA/FCGI-0.74.tar.gz

tar zxvf FCGI-0.74.tar.gz

cd FCGI-0.74

perl Makefile.PL

make && make install

安装mod_fastcgi,dso方式

wget http://www.fastcgi.com/dist/mod_fastcgi-2.4.6.tar.gz

tar zxvf mod_fastcgi-2.4.6.tar.gz

cd mod_fastcgi-2.4.6

apxs -o mod_fastcgi.so -c *.c

apxs -i -a -n fastcgi .libs/mod_fastcgi.so

修改apache配置文件,确认有以下一行,没有则添加

LoadModule fastcgi_module modules/mod_fastcgi.so

安装SMokePing

wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.8.tar.gz

tar zxvf smokeping-2.6.8.tar.gz

./configure --prefix=/usr/local/smokeping

在这里会获得相似以下错误提示,须要安装perl一些依赖包

 

checking checking for perl module 'RRDs'... Failed

checking checking for perl module 'FCGI'... Ok

checking checking for perl module 'CGI'... Ok

checking checking for perl module 'CGI::Fast'... Ok

checking checking for perl module 'Config::Grammar'... Failed

checking checking for perl module 'Digest::HMAC_MD5'... Failed

checking checking for perl module 'LWP'... Ok

** Aborting Configure ******************************

If you know where perl can find the missing modules, set

the PERL5LIB environment variable accordingly.

FIRST though, make sure that 'perl' starts the perl

binary you want to use for SmokePing.

Now you can install local copies of the missing modules

by running

./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty

The RRDs perl module is part of RRDtool. Either use the rrdtool

package provided by your OS or install rrdtool from source.

If you install from source, the RRDs module is located

PREFIX/lib/perl

先解决”checking checking for perl module ‘RRDs’… Failed”的问题,因为咱们是编译安装的rrdtool,因此perl没找到默认路径下它的模块,须要手工拷贝过去

6.0 32位

cp /usr/local/rrdtool/lib/perl/5.10.1/i386-linux-thread-multi/RRDs.pm /usr/lib/perl5/

cp /usr/local/rrdtool/lib/perl/5.10.1/i386-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib/perl5/

6.5 64位

 cp /usr/local/rrdtool-1.3.6/lib/perl/5.10.1/x86_64-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib64/perl5/

 cp /usr/local/rrdtool-1.3.6/lib/perl/5.10.1/x86_64-linux-thread-multi/RRDs.pm /usr/lib64/perl5/

CentOS5.9

cp /usr/local/rrdtool/lib/perl/5.8.8/i386-linux-thread-multi/RRDs.pm /usr/lib/perl5/5.8.8/i386-linux-thread-multi/

cp /usr/local/rrdtool/lib/perl/5.8.8/i386-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib/perl5/5.8.8/i386-linux-thread-multi/

下面的几个模块在错误提示中已经提到解决办法,运行如下指令就会自动下载安装了

./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty

装完以后,从新运行下面指令

./configure --prefix=/usr/local/smokeping

gmake install

配置smokeping

 

cd /usr/local/smokeping/

mkdir cache data var

chown apache.apache cache data var

cd /usr/local/smokeping/htdocs/

cp smokeping.fcgi.dist smokeping.fcgi

cd /usr/local/smokeping/etc/

cp config.dist config

chmod 400 /usr/local/smokeping/etc/smokeping_secrets.dist

ln -s /usr/local/smokeping/cache /usr/local/smokeping/htdocs/cache

修改/usr/local/smokeping/etc/config

vi /usr/local/smokeping/etc/config

找到binary = /usr/sbin/fping

修改成binary = /usr/local/sbin/fping

/usr/local/sbin/fping

修改/usr/local/smokeping/bin/smokeping

vi /usr/local/smokeping/bin/smokeping

找到：use lib qw(); # PERL5LIB

修改成：use lib qw(/usr/local/rrdtool/lib/perl); # PERL5LIB

修改主机配置文件，增长本身的主机，若是只想测试就把host改为本身要检测的IP就好了

+ Test

menu= Targets

#parents = owner:/Test/James location:/

++ James

menu = James

title =James

alerts = someloss

slaves = boomer slave2

host = james.address

++ MultiHost

menu = Multihost

title = James and James as seen from Boomer

host = /Test/James /Test/James~boomer

建立开机自动运行脚本

vi /etc/rc.local

写入以下内容

nohup /usr/local/smokeping/bin/smokeping --logfile=/var/log/smokeping.log 2>&1 &

修改apache配置文件

Alias /smokeping/ "/usr/local/smokeping/htdocs/"

<Directory "/usr/local/smokeping/">

AllowOverride None

Options All

AddHandler cgi-script .fcgi .cgi

Order allow,deny

Allow from all

DirectoryIndex smokeping.fcgi

</Directory>

最后重器apache服务，运行

nohup /usr/local/smokeping/bin/smokeping –logfile=/var/log/smokeping.log 2>&1 &

打开浏览器输入http://smokeping-ip/smokeping/便可访问