asp.net MVC路由配置总结

URL构造

命名参数规范+匿名对象

routes.MapRoute(name: "Default",url: "{controller}/{action}/{id}", defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional } );

 

构造路由而后添加

 

Route myRoute = new Route("{controller}/{action}", new MvcRouteHandler()); routes.Add("MyRoute", myRoute);

 

直接方法重载+匿名对象

1	routes.MapRoute("ShopSchema", "Shop/{action}", new { controller = "Home" });

 

　　我的以为第一种比较易懂，第二种方便调试，第三种写起来比较效率吧。各取所需吧。本文行文偏向于第三种。

路由规则

 1.默认路由(MVC自带)

 

routes.MapRoute( "Default", // 路由名称 "{controller}/{action}/{id}", // 带有参数的 URL new { controller = "Home", action = "Index", id = UrlParameter.Optional } // 参数默认值 (UrlParameter.Optional-可选的意思) );

 

2.静态URL段

 

routes.MapRoute("ShopSchema2", "Shop/OldAction", new { controller = "Home", action = "Index" });   routes.MapRoute("ShopSchema", "Shop/{action}", new { controller = "Home" }); routes.MapRoute("ShopSchema2", "Shop/OldAction.js",  new { controller = "Home", action = "Index" });

 没有占位符路由就是现成的写死的。

好比这样写而后去访问http://localhost:XXX/Shop/OldAction.js，response也是彻底没问题的。 controller , action , area这三个保留字就别设静态变量里面了。

3.自定义常规变量URL段（好吧这翻译暴露智商了）

 

routes.MapRoute("MyRoute2", "{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "DefaultId" });

 

这种状况若是访问 /Home/Index 的话，由于第三段（id）没有值，根据路由规则这个参数会被设为DefaultId

这个用viewbag给title赋值就能很明显看出

ViewBag.Title = RouteData.Values["id"];

 

图不贴了，结果是标题显示为DefaultId。 注意要在控制器里面赋值，在视图赋值无法编译的。

4.再述默认路由

而后再回到默认路由。 UrlParameter.Optional这个叫可选URL段.路由里没有这个参数的话id为null。 照原文大体说法，这个可选URL段能用来实现一个关注点的分离。刚才在路由里直接设定参数默认值其实不是很好。照个人理解，实际参数是用户发来的，咱们作的只是定义形式参数名。可是，若是硬要给参数赋默认值的话，建议用语法糖写到action参数里面。好比：

 

1	public ActionResult Index(string id = "abcd"){ViewBag.Title = RouteData.Values["id"];return View();}

 

5.可变长度路由。

 

1	routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional });

 

在这里id和最后一段都是可变的，因此 /Home/Index/dabdafdaf 等效于 /Home/Index//abcdefdjldfiaeahfoeiho 等效于 /Home/Index/All/Delete/Perm/.....

6.跨命名空间路由

 这个提醒一下记得引用命名空间，开启IIS网站否则就是404。这个很是非主流，不建议瞎搞。

 

1	routes.MapRoute("MyRoute","{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.AdditionalControllers", "UrlsAndRoutes.Controllers" });

 

可是这样写的话数组排名不分前后的，若是有多个匹配的路由会报错。 而后做者提出了一种改进写法。

 

routes.MapRoute("AddContollerRoute","Home/{action}/{id}/{*catchall}",new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.AdditionalControllers" }); routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.Controllers" });

 这样第一个URL段不是Home的都交给第二个处理 最后还能够设定这个路由找不到的话就不给后面的路由留后路啦，也就再也不往下找啦。

1 2 3 4

Route myRoute = routes.MapRoute("AddContollerRoute", "Home/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional }, new[] { "URLsAndRoutes.AdditionalControllers" });  myRoute.DataTokens["UseNamespaceFallback"] = false;

 

7.正则表达式匹配路由

1 2 3 4

routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}",  new { controller = "Home", action = "Index", id = UrlParameter.Optional },  new { controller = "^H.*"}, new[] { "URLsAndRoutes.Controllers"});

 

 约束多个URL

 

1 2 3 4

routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional }, new { controller = "^H.*", action = "^Index$|^About$"}, new[] { "URLsAndRoutes.Controllers"});

 

8.指定请求方法

 

1 2 3 4 5 6 7

routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}",   new { controller = "Home", action = "Index", id = UrlParameter.Optional },   new { controller = "^H.*", action = "Index|About", httpMethod = new HttpMethodConstraint("GET") },   new[] { "URLsAndRoutes.Controllers" });

 

9. WebForm支持

1 2 3 4 5 6 7

routes.MapPageRoute("", "", "~/Default.aspx");    routes.MapPageRoute("list", "Items/{action}", "~/Items/list.aspx", false, new RouteValueDictionary { { "action", "all" } });    routes.MapPageRoute("show", "Show/{action}", "~/show.aspx", false, new RouteValueDictionary { { "action", "all" } });    routes.MapPageRoute("edit", "Edit/{id}", "~/edit.aspx", false, new RouteValueDictionary { { "id", "1" } }, new RouteValueDictionary { { "id", @"\d+" } });

 具体的能够看

使用Asp.Net4新特性路由建立WebForm应用

或者官方msdn

 

10.MVC5的RouteAttribute

首先要在路由注册方法那里

1 2	//启用路由特性映射 routes.MapMvcAttributeRoutes();

 这样

1	[Route("Login")]

 route特性才有效.该特性有好几个重载.还有路由约束啊,顺序啊,路由名之类的.

其余的还有路由前缀,路由默认值

1	[RoutePrefix("reviews")]<br>[Route("{action=index}")]<br>public class ReviewsController : Controller<br>{<br>}

 路由构造

1 2 3 4 5 6 7

// eg: /users/5 [Route("users/{id:int}"] public ActionResult GetUserById(int id) { ... }    // eg: users/ken [Route("users/{name}"] public ActionResult GetUserByName(string name) { ... }

 参数限制

1 2 3 4 5

// eg: /users/5 // but not /users/10000000000 because it is larger than int.MaxValue, // and not /users/0 because of the min(1) constraint. [Route("users/{id:int:min(1)}")] public ActionResult GetUserById(int id) { ... }

  

Constraint	Description	Example
alpha	Matches uppercase or lowercase Latin alphabet characters (a-z, A-Z)	{x:alpha}
bool	Matches a Boolean value.	{x:bool}
datetime	Matches a DateTime value.	{x:datetime}
decimal	Matches a decimal value.	{x:decimal}
double	Matches a 64-bit floating-point value.	{x:double}
float	Matches a 32-bit floating-point value.	{x:float}
guid	Matches a GUID value.	{x:guid}
int	Matches a 32-bit integer value.	{x:int}
length	Matches a string with the specified length or within a specified range of lengths.	{x:length(6)}  {x:length(1,20)}
long	Matches a 64-bit integer value.	{x:long}
max	Matches an integer with a maximum value.	{x:max(10)}
maxlength	Matches a string with a maximum length.	{x:maxlength(10)}
min	Matches an integer with a minimum value.	{x:min(10)}
minlength	Matches a string with a minimum length.	{x:minlength(10)}
range	Matches an integer within a range of values.	{x:range(10,50)}
regex	Matches a regular expression.	{x:regex(^\d{3}-\d{3}-\d{4}$)}

 

具体的能够参考

Attribute Routing in ASP.NET MVC 5

 对我来讲,这样的好处是分散了路由规则的定义.有人喜欢集中,我我的比较喜欢这种灵活的处理.由于这个action定义好后,我不须要跑到配置那里定义对应的路由规则

 

11.最后仍是不爽的话本身写个类实现 IRouteConstraint的匹配方法。

 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Routing; /// <summary> /// If the standard constraints are not sufficient for your needs, you can define your own custom constraints by implementing the IRouteConstraint interface. /// </summary> public class UserAgentConstraint : IRouteConstraint {       private string requiredUserAgent;     public UserAgentConstraint(string agentParam)     {         requiredUserAgent = agentParam;     }     public bool Match(HttpContextBase httpContext, Route route, string parameterName,     RouteValueDictionary values, RouteDirection routeDirection)     {         return httpContext.Request.UserAgent != null &&         httpContext.Request.UserAgent.Contains(requiredUserAgent);     } }

 

1 2 3 4 5 6 7

routes.MapRoute("ChromeRoute", "{*catchall}",   new { controller = "Home", action = "Index" },   new { customConstraint = new UserAgentConstraint("Chrome") },   new[] { "UrlsAndRoutes.AdditionalControllers" });

 好比这个就用来匹配是不是用谷歌浏览器访问网页的。

12.访问本地文档

 

1 2 3

routes.RouteExistingFiles = true;   routes.MapRoute("DiskFile", "Content/StaticContent.html", new { controller = "Customer", action = "List", });

 

浏览网站，以开启 IIS Express，而后点显示全部应用程序-点击网站名称-配置（applicationhost.config）-搜索UrlRoutingModule节点

1	<add name="UrlRoutingModule-4.0" type="System.Web.Routing.UrlRoutingModule" preCondition="managedHandler,runtimeVersionv4.0" />

 

把这个节点里的preCondition删除，变成

1	<add name="UrlRoutingModule-4.0" type="System.Web.Routing.UrlRoutingModule" preCondition="" />

 

 13.直接访问本地资源，绕过了路由系统

1	routes.IgnoreRoute("Content/{filename}.html");

 

文件名还能够用 {filename}占位符。

IgnoreRoute方法是RouteCollection里面StopRoutingHandler类的一个实例。路由系统经过硬-编码识别这个Handler。若是这个规则匹配的话，后面的规则都无效了。 这也就是默认的路由里面routes.IgnoreRoute("{resource}.axd/{*pathInfo}");写最前面的缘由。

路由测试（在测试项目的基础上，要装moq）

1	PM> Install-Package Moq

 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

using System; using Microsoft.VisualStudio.TestTools.UnitTesting; using System.Web; using Moq; using System.Web.Routing; using System.Reflection; [TestClass] public class RoutesTest {     private HttpContextBase CreateHttpContext(string targetUrl = null, string HttpMethod = "GET")     {         // create the mock request         Mock<HttpRequestBase> mockRequest = new Mock<HttpRequestBase>();         mockRequest.Setup(m => m.AppRelativeCurrentExecutionFilePath)         .Returns(targetUrl);         mockRequest.Setup(m => m.HttpMethod).Returns(HttpMethod);         // create the mock response         Mock<HttpResponseBase> mockResponse = new Mock<HttpResponseBase>();         mockResponse.Setup(m => m.ApplyAppPathModifier(         It.IsAny<string>())).Returns<string>(s => s);         // create the mock context, using the request and response         Mock<HttpContextBase> mockContext = new Mock<HttpContextBase>();         mockContext.Setup(m => m.Request).Returns(mockRequest.Object);         mockContext.Setup(m => m.Response).Returns(mockResponse.Object);         // return the mocked context         return mockContext.Object;     }       private void TestRouteMatch(string url, string controller, string action, object routeProperties = null, string httpMethod = "GET")     {         // Arrange         RouteCollection routes = new RouteCollection();         RouteConfig.RegisterRoutes(routes);         // Act - process the route         RouteData result = routes.GetRouteData(CreateHttpContext(url, httpMethod));         // Assert         Assert.IsNotNull(result);         Assert.IsTrue(TestIncomingRouteResult(result, controller, action, routeProperties));     }       private bool TestIncomingRouteResult(RouteData routeResult, string controller, string action, object propertySet = null)     {         Func<object, object, bool> valCompare = (v1, v2) =>         {             return StringComparer.InvariantCultureIgnoreCase             .Compare(v1, v2) == 0;         };         bool result = valCompare(routeResult.Values["controller"], controller)         && valCompare(routeResult.Values["action"], action);         if (propertySet != null)         {             PropertyInfo[] propInfo = propertySet.GetType().GetProperties();             foreach (PropertyInfo pi in propInfo)             {                 if (!(routeResult.Values.ContainsKey(pi.Name)                 && valCompare(routeResult.Values[pi.Name],                 pi.GetValue(propertySet, null))))                 {                     result = false;                     break;                 }             }         }         return result;     }       private void TestRouteFail(string url)     {         // Arrange         RouteCollection routes = new RouteCollection();         RouteConfig.RegisterRoutes(routes);         // Act - process the route         RouteData result = routes.GetRouteData(CreateHttpContext(url));         // Assert         Assert.IsTrue(result == null || result.Route == null);     }       [TestMethod]     public void TestIncomingRoutes()     {         // check for the URL that we hope to receive         TestRouteMatch("~/Admin/Index", "Admin", "Index");         // check that the values are being obtained from the segments         TestRouteMatch("~/One/Two", "One", "Two");         // ensure that too many or too few segments fails to match         TestRouteFail("~/Admin/Index/Segment");//失败         TestRouteFail("~/Admin");//失败         TestRouteMatch("~/", "Home", "Index");         TestRouteMatch("~/Customer", "Customer", "Index");         TestRouteMatch("~/Customer/List", "Customer", "List");         TestRouteFail("~/Customer/List/All");//失败         TestRouteMatch("~/Customer/List/All", "Customer", "List", new { id = "All" });         TestRouteMatch("~/Customer/List/All/Delete", "Customer", "List", new { id = "All", catchall = "Delete" });         TestRouteMatch("~/Customer/List/All/Delete/Perm", "Customer", "List", new { id = "All", catchall = "Delete/Perm" });     }       }

 

 

　　最后仍是再推荐一下Adam Freeman写的apress.pro.asp.net.mvc.4这本书。