Redis Cluster集群的搭建与实践[转]

时间 2020-08-02

原文原文链接

Redis Cluster集群的搭建与实践node

Redis Cluster集群
1、redis-cluster设计redis

Redis集群搭建的方式有多种，例如使用zookeeper等，但从redis 3.0以后版本支持redis-cluster集群，Redis-Cluster采用无中心结构，每一个节点保存数据和整个集群状态,每一个节点都和其余全部节点链接。其redis-cluster架构图以下：算法

其结构特色：ruby

一、全部的redis节点彼此互联(PING-PONG机制),内部使用二进制协议优化传输速度和带宽。
 二、节点的fail是经过集群中超过半数的节点检测失效时才生效。
 三、客户端与redis节点直连,不须要中间proxy层.客户端不须要链接集群全部节点,链接集群中任何一个可用节点便可。
 四、redis-cluster把全部的物理节点映射到[0-16383]slot上（不必定是平均分配）,cluster 负责维护node<->slot<->value。

 五、Redis集群预分好16384个桶，当须要在 Redis 集群中放置一个 key-value 时，根据 CRC16(key) mod 16384的值，决定将一个key放到哪一个桶中。

一、redis cluster节点分配服务器

如今咱们是三个主节点分别是：A, B, C 三个节点，它们能够是一台机器上的三个端口，也能够是三台不一样的服务器。那么，采用哈希槽 (hash slot)的方式来分配16384个slot 的话，它们三个节点分别承担的slot 区间是：架构

节点A覆盖0－5460;
  节点B覆盖5461－10922;
  节点C覆盖10923－16383.

 获取数据：

  若是存入一个值，按照redis cluster哈希槽的算法： CRC16('key')%16384 = 6782。 那么就会把这个key 的存储分配到 B 上了。一样，当我链接(A,B,C)任何一个节点想获取'key'这个key时，也会这样的算法，而后内部跳转到B节点上获取数据 

 新增一个主节点：

  新增一个节点D，redis cluster的这种作法是从各个节点的前面各拿取一部分slot到D上，我会在接下来的实践中实验。大体就会变成这样：

节点A覆盖1365-5460
节点B覆盖6827-10922
节点C覆盖12288-16383
节点D覆盖0-1364,5461-6826,10923-12287

 一样删除一个节点也是相似，移动完成后就能够删除这个节点了。

 二、Redis Cluster主从模式

      redis cluster 为了保证数据的高可用性，加入了主从模式，一个主节点对应一个或多个从节点，主节点提供数据存取，从节点则是从主节点拉取数据备份，当这个主节点挂掉后，就会有这个从节点选取一个来充当主节点，从而保证集群不会挂掉。

  上面那个例子里, 集群有ABC三个主节点, 若是这3个节点都没有加入从节点，若是B挂掉了，咱们就没法访问整个集群了。A和C的slot也没法访问。

 因此咱们在集群创建的时候，必定要为每一个主节点都添加了从节点, 好比像这样, 集群包含主节点A、B、C, 以及从节点A一、B一、C1, 那么即便B挂掉系统也能够继续正确工做。

 B1节点替代了B节点，因此Redis集群将会选择B1节点做为新的主节点，集群将会继续正确地提供服务。 当B从新开启后，它就会变成B1的从节点。

不过须要注意，若是节点B和B1同时挂了，Redis集群就没法继续正确地提供服务了。

2、redis集群的搭建app

集群中至少应该有奇数个节点，因此至少有三个节点，每一个节点至少有一个备份节点，因此下面使用6节点（主节点、备份节点由redis-cluster集群肯定）。

 下面使用redis-3.2.0安装，下载地址   
 一、安装redis节点指定端口

     解压redis压缩包，编译安装

[plain] view plain copytcp

[root@localhost redis-3.2.0]# tar xzf redis-3.2.0.tar.gz  
[root@localhost redis-3.2.0]# cd redis-3.2.0  
[root@localhost redis-3.2.0]# make  
[root@localhost redis01]# make install PREFIX=/usr/andy/redis-cluster  

    在redis-cluster下 修改bin文件夹为redis01,复制redis.conf配置文件

 配置redis的配置文件redis.conf

     daemonize yes #后台启动

    port 7001 #修改端口号，从7001到7006

    cluster-enabled yes #开启cluster，去掉注释

    cluster-config-file nodes.conf

    cluster-node-timeout 15000

    appendonly yes

    复制六份，修改对应的端口号

 二、安装redis-trib所需的 ruby脚本

      复制redis解压文件src下的redis-trib.rb文件到redis-cluster目录

[plain] view plain copyide

[root@localhost redis-cluster]# cp /usr/andy/redis/redis-3.2.0/src/redis-trib.rb ./  

     安装ruby环境：

[plain] view plain copy测试

[root@localhost redis-cluster]# yum install ruby  
[root@localhost redis-cluster]# yum install rubygems  

    安装redis-trib.rb运行依赖的ruby的包redis-3.2.2.gem，下载

[plain] view plain copy

[root@localhost redis-cluster]# gem install redis-3.2.2.gem  

 三、启动全部的redis节点

   能够写一个命令脚本start-all.sh

[plain] view plain copy

cd redis01  
./redis-server redis.conf  
cd ..  
cd redis02  
./redis-server redis.conf  
cd ..  
cd redis03  
./redis-server redis.conf  
cd ..  
cd redis04  
./redis-server redis.conf  
cd ..  
cd redis05  
./redis-server redis.conf  
cd ..  
cd redis06  
./redis-server redis.conf  
cd ..  

 设置权限启动

[plain] view plain copy

[root@localhost redis-cluster]# chmod 777 start-all.sh   
[root@localhost redis-cluster]# ./start-all.sh   

   查看redis进程启动状态

[plain] view plain copy

[root@localhost redis-cluster]# ps -ef | grep redis  

root       4547      1  0 23:12 ?        00:00:00 ./redis-server 127.0.0.1:7001 [cluster]  
root       4551      1  0 23:12 ?        00:00:00 ./redis-server 127.0.0.1:7002 [cluster]  
root       4555      1  0 23:12 ?        00:00:00 ./redis-server 127.0.0.1:7003 [cluster]  
root       4559      1  0 23:12 ?        00:00:00 ./redis-server 127.0.0.1:7004 [cluster]  
root       4563      1  0 23:12 ?        00:00:00 ./redis-server 127.0.0.1:7005 [cluster]  
root       4567      1  0 23:12 ?        00:00:00 ./redis-server 127.0.0.1:7006 [cluster]  
root       4840   4421  0 23:26 pts/1    00:00:00 grep --color=auto redis

能够看到redis的6个节点已经启动成功

杀死所有的几点：

[plain] view plain copy

[root@localhost redis-cluster]# pkill -9 redis  

 四、使用redis-trib.rb建立集群

[plain] view plain copy

./redis-trib.rb create --replicas 1 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005 127.0.0.1:7006  

   使用create命令 --replicas 1 参数表示为每一个主节点建立一个从节点，其余参数是实例的地址集合。

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb create --replicas 1 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005 127.0.0.1:7006  
>>> Creating cluster  
>>> Performing hash slots allocation on 6 nodes...  
Using 3 masters:  
127.0.0.1:7001  
127.0.0.1:7002  
127.0.0.1:7003  
Adding replica 127.0.0.1:7004 to 127.0.0.1:7001  
Adding replica 127.0.0.1:7005 to 127.0.0.1:7002  
Adding replica 127.0.0.1:7006 to 127.0.0.1:7003  
M: dfd510594da614469a93a0a70767ec9145aefb1a 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
M: e02eac35110bbf44c61ff90175e04d55cca097ff 127.0.0.1:7002  
   slots:5461-10922 (5462 slots) master  
M: 4385809e6f4952ecb122dbfedbee29109d6bb234 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
S: ec02c9ef3acee069e8849f143a492db18d4bb06c 127.0.0.1:7004  
   replicates dfd510594da614469a93a0a70767ec9145aefb1a  
S: 83e5a8bb94fb5aaa892cd2f6216604e03e4a6c75 127.0.0.1:7005  
   replicates e02eac35110bbf44c61ff90175e04d55cca097ff  
S: 10c097c429ca24f8720986c6b66f0688bfb901ee 127.0.0.1:7006  
   replicates 4385809e6f4952ecb122dbfedbee29109d6bb234  
Can I set the above configuration? (type 'yes' to accept): yes  
>>> Nodes configuration updated  
>>> Assign a different config epoch to each node  
>>> Sending CLUSTER MEET messages to join the cluster  
Waiting for the cluster to join......  
>>> Performing Cluster Check (using node 127.0.0.1:7001)  
M: dfd510594da614469a93a0a70767ec9145aefb1a 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
M: e02eac35110bbf44c61ff90175e04d55cca097ff 127.0.0.1:7002  
   slots:5461-10922 (5462 slots) master  
M: 4385809e6f4952ecb122dbfedbee29109d6bb234 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
M: ec02c9ef3acee069e8849f143a492db18d4bb06c 127.0.0.1:7004  
   slots: (0 slots) master  
   replicates dfd510594da614469a93a0a70767ec9145aefb1a  
M: 83e5a8bb94fb5aaa892cd2f6216604e03e4a6c75 127.0.0.1:7005  
   slots: (0 slots) master  
   replicates e02eac35110bbf44c61ff90175e04d55cca097ff  
M: 10c097c429ca24f8720986c6b66f0688bfb901ee 127.0.0.1:7006  
   slots: (0 slots) master  
   replicates 4385809e6f4952ecb122dbfedbee29109d6bb234  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  

   上面显示建立成功，有3个主节点，3个从节点，每一个节点都是成功链接状态。

   3个主节点[M]以及分配的哈希卡槽以下：

M: dfd510594da614469a93a0a70767ec9145aefb1a 127.0.0.1:7001
slots:0-5460 (5461 slots) master
M: e02eac35110bbf44c61ff90175e04d55cca097ff 127.0.0.1:7002
slots:5461-10922 (5462 slots) master
M: 4385809e6f4952ecb122dbfedbee29109d6bb234 127.0.0.1:7003
slots:10923-16383 (5461 slots) master

3个从节点[S]以及附属的主节点以下：

      S: ec02c9ef3acee069e8849f143a492db18d4bb06c 127.0.0.1:7004
         replicates dfd510594da614469a93a0a70767ec9145aefb1a
      S: 83e5a8bb94fb5aaa892cd2f6216604e03e4a6c75 127.0.0.1:7005
         replicates e02eac35110bbf44c61ff90175e04d55cca097ff
      S: 10c097c429ca24f8720986c6b66f0688bfb901ee 127.0.0.1:7006
         replicates 4385809e6f4952ecb122dbfedbee29109d6bb234

    以上集群安装成功了，若是安装未成功报以下错误
   >>> Creating cluster
   [ERR] Sorry, can't connect to node  ....

      须要安装最新的ruby源码，下载

[plain] view plain copy

[root@localhost redis-cluster]# tar -zxvf ruby-2.3.1.tar.gz   
[root@localhost redis-cluster]# cd    
[root@localhost redis-cluster]# ./configure --prefix=/usr/local/ruby-2.3.1    
[root@localhost redis-cluster]# make && make install       
[root@localhost redis-cluster]#gem install redis    

     还有一种状况是，在VMware作测试的时间（都在一台服务器时），ip应该使用127.0.0.1，若是使用局域网ip，也会报节点建立失败。

3、redis集群的测试
一、测试存取值

客户端链接集群redis-cli须要带上 -c ，redis-cli -c -p 端口号

[plain] view plain copy

[root@localhost redis01]# ./redis-cli -c -p 7001  
127.0.0.1:7001> set name andy  
-> Redirected to slot [5798] located at 127.0.0.1:7002  
OK  
127.0.0.1:7002> get name  
"andy"  
127.0.0.1:7002>   

    根据redis-cluster的key值分配，name应该分配到节点7002[5461-10922]上，上面显示redis cluster自动从7001跳转到了7002节点。

   咱们能够测试一下7006从节点获取name值

[plain] view plain copy

[root@localhost redis06]# ./redis-cli -c -p 7006  
127.0.0.1:7006> get name  
-> Redirected to slot [5798] located at 127.0.0.1:7002  
"andy"  
127.0.0.1:7002>   

    7006位7003的从节点，从上面也是自动跳转至7002获取值，这也是redis cluster的特色，它是去中心化，每一个节点都是对等的，链接哪一个节点均可以获取和设置数据。

4、集群节点选举

如今模拟将7002节点挂掉，按照redis-cluster原理会选举会将 7002的从节点7005选举为主节点。

[plain] view plain copy

[root@localhost redis-cluster]# ps -ef | grep redis  
root       7950      1  0 12:50 ?        00:00:28 ./redis-server 127.0.0.1:7001 [cluster]  
root       7952      1  0 12:50 ?        00:00:29 ./redis-server 127.0.0.1:7002 [cluster]  
root       7956      1  0 12:50 ?        00:00:29 ./redis-server 127.0.0.1:7003 [cluster]  
root       7960      1  0 12:50 ?        00:00:29 ./redis-server 127.0.0.1:7004 [cluster]  
root       7964      1  0 12:50 ?        00:00:29 ./redis-server 127.0.0.1:7005 [cluster]  
root       7966      1  0 12:50 ?        00:00:29 ./redis-server 127.0.0.1:7006 [cluster]  
root      11346  10581  0 14:57 pts/2    00:00:00 grep --color=auto redis  
[root@localhost redis-cluster]# kill 7952  

    在查看集群中的7002节点

[plain] view plain copy

[root@localhost redis-cluster]#   
[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7002  
[ERR] Sorry, can't connect to node 127.0.0.1:7002  
[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7005  
>>> Performing Cluster Check (using node 127.0.0.1:7005)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:5461-10922 (5462 slots) master  
   0 additional replica(s)  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
   1 additional replica(s)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
   1 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#   

  能够看到集群链接不了7002节点，而7005有原来的S转换为M节点，代替了原来的7002节点。咱们能够获取name值：

[plain] view plain copy

[root@localhost redis01]# ./redis-cli -c -p 7001  
127.0.0.1:7001> get name  
-> Redirected to slot [5798] located at 127.0.0.1:7005  
"andy"  
127.0.0.1:7005>   
127.0.0.1:7005>

从7001节点连入，自动跳转到7005节点，而且获取name值。

如今咱们将7002节点恢复，看是否会自动加入集群中以及充当的M仍是S节点。

[plain] view plain copy

[root@localhost redis-cluster]# cd redis02  
[root@localhost redis02]# ./redis-server redis.conf   
[root@localhost redis02]#   

 在check一下7002节点

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7002  
>>> Performing Cluster Check (using node 127.0.0.1:7002)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
   1 additional replica(s)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:5461-10922 (5462 slots) master  
   1 additional replica(s)  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
   1 additional replica(s)  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#   

能够看到7002节点变成了a5db243087d8bd423b9285fa8513eddee9bb59a6 7005的从节点。

5、集群节点添加

节点新增包括新增主节点、从节点两种状况。如下分别作一下测试：
一、新增主节点

新增一个节点7007做为主节点修改配置文件

[plain] view plain copy

[root@localhost redis-cluster]# cp -r  redis01 redis07  
[root@localhost redis-cluster]# cd redis07/  
[root@localhost redis07]# sed -i "s/7001/7007/g" ./redis.conf   

  启动7007redis服务

[plain] view plain copy

[root@localhost redis07]# ./redis-server redis.conf   
[root@localhost redis07]# netstat -anp | grep 7007  
tcp        0      0 127.0.0.1:17007         0.0.0.0:*               LISTEN      13441/./redis-serve   
tcp        0      0 127.0.0.1:7007          0.0.0.0:*               LISTEN      13441/./redis-serve   
[root@localhost redis07]#

上面能够看到，7007已经启动，如今加入集群中。添加使用redis-trib.rb的add-node命令

[plain] view plain copy

./redis-trib.rb add-node 127.0.0.1:7007 127.0.0.1:7002  

add-node是加入集群节点，127.0.0.1:7007为要加入的节点，127.0.0.1:7002 表示加入的集群的一个节点，用来辨识是哪一个集群，理论上那个集群的节点均可以。

执行如下add-node

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb add-node 127.0.0.1:7007 127.0.0.1:7002  
>>> Adding node 127.0.0.1:7007 to cluster 127.0.0.1:7002  
>>> Performing Cluster Check (using node 127.0.0.1:7002)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
   1 additional replica(s)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:5461-10922 (5462 slots) master  
   1 additional replica(s)  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
   1 additional replica(s)  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
>>> Send CLUSTER MEET to node 127.0.0.1:7007 to make it join the cluster.  
[OK] New node added correctly.  
[root@localhost redis-cluster]#   

 能够看到7007加入这个Cluster，并成为一个新的节点。

 能够check如下7007节点状态

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7007  
>>> Performing Cluster Check (using node 127.0.0.1:7007)  
M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots: (0 slots) master  
   0 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
   1 additional replica(s)  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:5461-10922 (5462 slots) master  
   1 additional replica(s)  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#

M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007
slots: (0 slots) master
0 additional replica(s)

上面信息能够看到有4个M节点，3个S节点，7007成为了M主节点，它没有附属的从节点，并且Cluster并未给7007分配哈希卡槽（0 slots）。

能够从客户端链接集群查看一下，集群节点的链接状况

[plain] view plain copy

[root@localhost redis-cluster]# cd redis07/  
[root@localhost redis07]# ./redis-cli -c -p 7007  
127.0.0.1:7007> cluster nodes  
8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006 slave f9886c71e98a53270f7fda961e1c5f730382d48f 0 1462955393326 3 connected  
dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001 master - 0 1462955388247 1 connected 0-5460  
ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007 myself,master - 0 0 0 connected  
f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003 master - 0 1462955390270 3 connected 10923-16383  
1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002 slave a5db243087d8bd423b9285fa8513eddee9bb59a6 0 1462955394334 7 connected  
a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005 master - 0 1462955392309 7 connected 5461-10922  
50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004 slave dd19221c404fb2fc4da37229de56bab755c76f2b 0 1462955389663 1 connected  
127.0.0.1:7007>   

 redis-cluster在新增节点时并未分配卡槽，须要咱们手动对集群进行从新分片迁移数据，须要从新分片命令 reshard

          redis-trib.rb reshard 127.0.0.1:7005

 这个命令是用来迁移slot节点的，后面的127.0.0.1:7005是表示是哪一个集群，端口填［7000-7007］均可以，执行结果以下：

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb reshard 127.0.0.1:7005  
>>> Performing Cluster Check (using node 127.0.0.1:7005)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:5461-10922 (5462 slots) master  
   1 additional replica(s)  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:10923-16383 (5461 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots: (0 slots) master  
   0 additional replica(s)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:0-5460 (5461 slots) master  
   1 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
How many slots do you want to move (from 1 to 16384)?   

  它提示咱们须要迁移多少slot到7007上，咱们平分16384个哈希槽给4个节点：16384/4 = 4096，咱们须要移动4096个槽点到7007上。

[plain] view plain copy

[OK] All 16384 slots covered.  
How many slots do you want to move (from 1 to 16384)? 4096  
What is the receiving node ID?   

 须要输入7007的节点id，ee3efb90e5ac0725f15238a64fc60a18a71205d7

[plain] view plain copy

Please enter all the source node IDs.  
  Type 'all' to use all the nodes as source nodes for the hash slots.  
  Type 'done' once you entered all the source nodes IDs.  
Source node #1:  

  redis-trib 会向你询问从新分片的源节点（source node），即，要从特色的哪一个节点中取出 4096 个哈希槽，仍是从所有节点提取4096个哈希槽， 并将这些槽移动到7007节点上面。

 若是咱们不打算从特定的节点上取出指定数量的哈希槽，那么能够向redis-trib输入 all，这样的话， 集群中的全部主节点都会成为源节点，redis-trib从各个源节点中各取出一部分哈希槽，凑够4096个，而后移动到7007节点上：

[plain] view plain copy

Source node #1:all  

而后开始从别的主节点迁移哈希槽，而且确认。

[plain] view plain copy

Moving slot 1343 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1344 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1345 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1346 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1347 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1348 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1349 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1350 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1351 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1352 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1353 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1354 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1355 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1356 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1357 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1358 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1359 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1360 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1361 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1362 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1363 from dd19221c404fb2fc4da37229de56bab755c76f2b  
    Moving slot 1364 from dd19221c404fb2fc4da37229de56bab755c76f2b  
Do you want to proceed with the proposed reshard plan (yes/no)? yes  

 确认以后，redis-trib就开始执行分片操做，将哈希槽一个一个从源主节点移动到7007目标主节点。

 从新分片结束后咱们能够check如下节点的分配状况。

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7001  
>>> Performing Cluster Check (using node 127.0.0.1:7001)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:1365-5460 (4096 slots) master  
   1 additional replica(s)  
M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots:0-1364,5461-6826,10923-12287 (4096 slots) master  
   0 additional replica(s)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#

slots:0-1364,5461-6826,10923-12287 (4096 slots) master

能够看到7007节点分片的哈希槽片不是连续的，间隔的移动。

[plain] view plain copy

[root@localhost redis-cluster]# cd redis07/  
[root@localhost redis07]# ./redis-cli -c 7007  
Could not connect to Redis at 127.0.0.1:6379: Connection refused  
[root@localhost redis07]# ./redis-cli -c -p 7007  
127.0.0.1:7007> keys *  
1) "name"  
2) "age"  
127.0.0.1:7007>   
127.0.0.1:7007>   

能够看到将7001的age[741]和name[5798]移动到7007节点上，

主节点7007添加成功。

二、新增从节点

   新增一个节点7008节点，使用add-node --slave命令。

[plain] view plain copy

[root@localhost redis-cluster]# cp -r redis01/ redis08  
[root@localhost redis-cluster]# cd redis08/  
[root@localhost redis08]# sed -i "s/7001/7008/g" ./redis.conf  
[root@localhost redis08]# ./redis-server redis.conf

redis-trib增长从节点的命令为：

[plain] view plain copy

./redis-trib.rb add-node --slave --master-id $[nodeid] 127.0.0.1:7008 127.0.0.1:7000  

nodeid为要加到master主节点的node id，127.0.0.1:7008为新增的从节点，127.0.0.1:7000为集群的一个节点（集群的任意节点都行），用来辨识是哪一个集群；若是没有给定那个主节点--master-id的话，redis-trib将会将新增的从节点随机到从节点较少的主节点上。

如今咱们添加一下7008，看是否会自动加到没有从节点的7007主节点上。

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb add-node --slave 127.0.0.1:7008 127.0.0.1:7001>>> Adding node 127.0.0.1:7008 to cluster 127.0.0.1:7001  
>>> Performing Cluster Check (using node 127.0.0.1:7001)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:1365-5460 (4096 slots) master  
   1 additional replica(s)  
M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots:0-1364,5461-6826,10923-12287 (4096 slots) master  
   0 additional replica(s)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
Automatically selected master 127.0.0.1:7007  
>>> Send CLUSTER MEET to node 127.0.0.1:7008 to make it join the cluster.  
Waiting for the cluster to join.  
>>> Configure node as replica of 127.0.0.1:7007.  
[OK] New node added correctly.  
[root@localhost redis-cluster]#   

 能够看到自动选择了127.0.0.1:7007为master主节点，而且添加成功。

 能够check一下7008：

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7008  
>>> Performing Cluster Check (using node 127.0.0.1:7008)  
S: 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008  
   slots: (0 slots) slave  
   replicates ee3efb90e5ac0725f15238a64fc60a18a71205d7  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:1365-5460 (4096 slots) master  
   1 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots:0-1364,5461-6826,10923-12287 (4096 slots) master  
   1 additional replica(s)  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#   

   能够看到7008做为了7007的从节点。

   再测试一下指定主节点添加从节点，给7007增长7009从节点。

[plain] view plain copy

[root@localhost redis-cluster]# cp -r redis01/ redis09  
[root@localhost redis-cluster]# cd redis09  
[root@localhost redis09]# sed -i "s/7001/7009/g" ./redis.conf  
[root@localhost redis09]# ./redis-server redis.conf   

   添加7007主节点上

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb add-node --slave --master-id ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7009 127.0.0.1:7001  
>>> Adding node 127.0.0.1:7009 to cluster 127.0.0.1:7001  
>>> Performing Cluster Check (using node 127.0.0.1:7001)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:1365-5460 (4096 slots) master  
   1 additional replica(s)  
S: 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008  
   slots: (0 slots) slave  
   replicates ee3efb90e5ac0725f15238a64fc60a18a71205d7  
M: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots:0-1364,5461-6826,10923-12287 (4096 slots) master  
   1 additional replica(s)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
>>> Send CLUSTER MEET to node 127.0.0.1:7009 to make it join the cluster.  
Waiting for the cluster to join.  
>>> Configure node as replica of 127.0.0.1:7007.  
[OK] New node added correctly.  
[root@localhost redis-cluster]#   

 显示从节点7009节点添加到7007主节点，能够看一下7007的从节点，以下：

[plain] view plain copy

[root@localhost redis-cluster]# cd ./redis07  
[root@localhost redis07]# ./redis-cli -c -p 7007 cluster nodes | grep ee3efb90e5ac0725f15238a64fc60a18a71205d7   
1f51443ede952b98724fea2a12f61fe710ab6cb1 127.0.0.1:7009 slave ee3efb90e5ac0725f15238a64fc60a18a71205d7 0 1462962710266 8 connected  
ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007 myself,master - 0 0 8 connected 0-1364 5461-6826 10923-12287  
2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008 slave ee3efb90e5ac0725f15238a64fc60a18a71205d7 0 1462962711607 8 connected  
[root@localhost redis07]#   

 maser 7007有2个slave 7008,7009。

 咱们测试一下7007节点挂掉，看7008和7009那个成为主节点。

[plain] view plain copy

[root@localhost redis-cluster]# ps -ef | grep redis  
root       7950      1  0 12:50 ?        00:02:05 ./redis-server 127.0.0.1:7001 [cluster]  
root       7956      1  0 12:50 ?        00:02:11 ./redis-server 127.0.0.1:7003 [cluster]  
root       7960      1  0 12:50 ?        00:01:47 ./redis-server 127.0.0.1:7004 [cluster]  
root       7964      1  0 12:50 ?        00:02:07 ./redis-server 127.0.0.1:7005 [cluster]  
root       7966      1  0 12:50 ?        00:01:46 ./redis-server 127.0.0.1:7006 [cluster]  
root      12070      1  0 15:14 ?        00:01:08 ./redis-server 127.0.0.1:7002 [cluster]  
root      13441      1  0 16:09 ?        00:01:25 ./redis-server 127.0.0.1:7007 [cluster]  
root      15939      1  0 17:41 ?        00:00:20 ./redis-server 127.0.0.1:7008 [cluster]  
root      16623      1  0 18:07 ?        00:00:10 ./redis-server 127.0.0.1:7009 [cluster]  
root      17295  10581  0 18:37 pts/2    00:00:00 grep --color=auto redis  
[root@localhost redis-cluster]# kill -9 13441  
[root@localhost redis-cluster]# cd ./redis08  
[root@localhost redis08]# ./redis-cli -c -p 7008  
127.0.0.1:7008> get name  
-> Redirected to slot [5798] located at 127.0.0.1:7009  
"andy"  
127.0.0.1:7009> cluster nodes  
ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007 master,fail - 1462963082317 1462963080194 8 disconnected  
50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004 slave dd19221c404fb2fc4da37229de56bab755c76f2b 0 1462963170968 1 connected  
f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003 master - 0 1462963168525 3 connected 12288-16383  
dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001 master - 0 1462963164466 1 connected 1365-5460  
2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008 slave 1f51443ede952b98724fea2a12f61fe710ab6cb1 0 1462963167508 9 connected  
1f51443ede952b98724fea2a12f61fe710ab6cb1 127.0.0.1:7009 myself,master - 0 0 9 connected 0-1364 5461-6826 10923-12287  
1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002 slave a5db243087d8bd423b9285fa8513eddee9bb59a6 0 1462963170564 7 connected  
8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006 slave f9886c71e98a53270f7fda961e1c5f730382d48f 0 1462963167915 3 connected  
a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005 master - 0 1462963169538 7 connected 6827-10922  
127.0.0.1:7009>   

  能够看到7009代替7007成了主节点。

   重启7007以后，会自动变成7009的从节点。

[plain] view plain copy

[root@localhost redis-cluster]# cd redis07  
[root@localhost redis07]# ./redis-server redis.conf   
[root@localhost redis07]# cd ../  
[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7007  
>>> Performing Cluster Check (using node 127.0.0.1:7007)  
S: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates dd19221c404fb2fc4da37229de56bab755c76f2b  
M: 1f51443ede952b98724fea2a12f61fe710ab6cb1 127.0.0.1:7009  
   slots:0-1364,5461-6826,10923-12287 (4096 slots) master  
   2 additional replica(s)  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots:1365-5460 (4096 slots) master  
   1 additional replica(s)  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#   

验证了以前的测试。

6、节点的移除

和节点添加同样，移除节点也有移除主节点，从节点。
一、移除主节点

移除节点使用redis-trib的del-node命令，

[plain] view plain copy

redis-trib del-node 127.0.0.1:7002  ${node-id}  

127.0.0.1:7002位集群节点，node-id为要删除的主节点。 和添加节点不一样，移除节点node-id是必需的，测试删除7001主节点：

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb del-node 127.0.0.1:7001 <span style="font-size: 14px;">dd19221c404fb2fc4da37229de56bab755c76f2b</span>  
>>> Removing node <span style="font-size: 14px;">dd19221c404fb2fc4da37229de56bab755c76f2b</span> from cluster 127.0.0.1:7002  
[ERR] Node 127.0.0.1:7001 is not empty! Reshard data away and try again.  
[root@localhost redis-cluster]#

redis cluster提示7001已经有数据了，不可以被删除，须要将他的数据转移出去，也就是和新增主节点同样需从新分片。

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb reshard 127.0.0.1:7002

执行之后会提示咱们移除的大小，由于7001占用了4096个槽点

[plain] view plain copy

>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
How many slots do you want to move (from 1 to 16384)?

输入4096

提示移动的node id，填写7009的node id。

[plain] view plain copy

How many slots do you want to move (from 1 to 16384)? 4096  
What is the receiving node ID?

须要移动到所有主节点上仍是单个主节点

[plain] view plain copy

Please enter all the source node IDs.  
  Type 'all' to use all the nodes as source nodes for the hash slots.  
  Type 'done' once you entered all the source nodes IDs.  
Source node #1:

将4096个槽点移动到7009上，填写7001的node id ：dd19221c404fb2fc4da37229de56bab755c76f2b

[plain] view plain copy

Source node #1:dd19221c404fb2fc4da37229de56bab755c76f2b  
Source node #2:done  
Do you want to proceed with the proposed reshard plan (yes/no)? yes

确认以后会一个一个将7001的卡槽移到到7009上。

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7009  
>>> Performing Cluster Check (using node 127.0.0.1:7009)  
M: 1f51443ede952b98724fea2a12f61fe710ab6cb1 127.0.0.1:7009  
   slots:0-6826,10923-12287 (8192 slots) master  
   3 additional replica(s)  
S: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
M: dd19221c404fb2fc4da37229de56bab755c76f2b 127.0.0.1:7001  
   slots: (0 slots) master  
   0 additional replica(s)  
S: 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#   

 能够看到7001有0个卡槽，而7009有8192个卡槽。

 在执行移除操做

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb del-node 127.0.0.1:7002 dd19221c404fb2fc4da37229de56bab755c76f2b  
>>> Removing node dd19221c404fb2fc4da37229de56bab755c76f2b from cluster 127.0.0.1:7002  
>>> Sending CLUSTER FORGET messages to the cluster...  
>>> SHUTDOWN the node.  
[root@localhost redis-cluster]#   

已经删除了7001节点。

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7001  
[ERR] Sorry, can't connect to node 127.0.0.1:7001  
[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7009  
>>> Performing Cluster Check (using node 127.0.0.1:7009)  
M: 1f51443ede952b98724fea2a12f61fe710ab6cb1 127.0.0.1:7009  
   slots:0-6826,10923-12287 (8192 slots) master  
   3 additional replica(s)  
S: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 127.0.0.1:7008  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#

能够看到7001已经链接不了；而7001的从节点7004自动分配到了7009主节点中，7009如今3个从节点。

二、移除从节点

好比删除7009的7008节点：

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb del-node 127.0.0.1:7009 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5  
>>> Removing node 2ab1b061c36f30ae35604e9a171ae3afdc3c87e5 from cluster 127.0.0.1:7009  
>>> Sending CLUSTER FORGET messages to the cluster...  
>>> SHUTDOWN the node.  
[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7008  
[ERR] Sorry, can't connect to node 127.0.0.1:7008  
[root@localhost redis-cluster]#   

 删除从节点比较方便，如今redis-cluster中有3个主节点，4个从节点，以下：

[plain] view plain copy

[root@localhost redis-cluster]# ./redis-trib.rb check 127.0.0.1:7009  
>>> Performing Cluster Check (using node 127.0.0.1:7009)  
M: 1f51443ede952b98724fea2a12f61fe710ab6cb1 127.0.0.1:7009  
   slots:0-6826,10923-12287 (8192 slots) master  
   2 additional replica(s)  
S: ee3efb90e5ac0725f15238a64fc60a18a71205d7 127.0.0.1:7007  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
S: 50ce1ea59106b4c2c6bc502593a6a7a7dabf5041 127.0.0.1:7004  
   slots: (0 slots) slave  
   replicates 1f51443ede952b98724fea2a12f61fe710ab6cb1  
M: f9886c71e98a53270f7fda961e1c5f730382d48f 127.0.0.1:7003  
   slots:12288-16383 (4096 slots) master  
   1 additional replica(s)  
S: 1f07d76585bfab35f91ec711ac53ab4bc00f2d3a 127.0.0.1:7002  
   slots: (0 slots) slave  
   replicates a5db243087d8bd423b9285fa8513eddee9bb59a6  
S: 8bb3ede48319b46d0015440a91ab277da9353c8b 127.0.0.1:7006  
   slots: (0 slots) slave  
   replicates f9886c71e98a53270f7fda961e1c5f730382d48f  
M: a5db243087d8bd423b9285fa8513eddee9bb59a6 127.0.0.1:7005  
   slots:6827-10922 (4096 slots) master  
   1 additional replica(s)  
[OK] All nodes agree about slots configuration.  
>>> Check for open slots...  
>>> Check slots coverage...  
[OK] All 16384 slots covered.  
[root@localhost redis-cluster]#

ok，测试到这儿吧。