Vmware esxi 下修改 Gen8 Raid配置

硬件环境：HP GEN8 桌面版。主板集成的raid卡

系统：Vmware esxi 6.0 HP从新封装的版本，自带了全部HP驱动

作了三个RAID，两个raid1，一个raid0。raid0只用了一个320G盘，而后320G盘掉线了。提示灯变红。。

 

悲催的是 HP IP进不去，重启电脑后没办法使用HP工具，只能在Vmware下操做了。

经过百度发现vmware esxi下有 hp的管理包

不肯定有没有的能够用命令,能看到是否安装了HP工具

esxcli software vib list |grep Hewlett

个人提示有。好比有：hpacucli，scsi-hpaa。

注意。软件的安装位置不同。

个人安装在 /opt/smartstorageadmin/ssacli/bin

 

**********操做Raid有危险。肯定明确知道命令的做用在使用。**********

 

由于我只是作删除操做。先查看Raid信息

[root@localhost:/opt/smartstorageadmin/ssacli/bin] ./ssacli ctrl slot=0 pd all show Smart Array B120i SATA RAID in Slot 0 (Embedded) Array A physicaldrive 1I:0:1 (port 1I:box 0:bay 1, SATA HDD, 3 TB, OK) physicaldrive 2I:0:2 (port 2I:box 0:bay 2, SATA HDD, 3 TB, OK) Array B physicaldrive 3I:0:3 (port 3I:box 0:bay 3, SATA HDD, 3 TB, OK) physicaldrive 4I:0:4 (port 4I:box 0:bay 4, SATA HDD, 3 TB, OK) Array C physicaldrive 5I:0:5 (port 5I:box 0:bay 5, SATA HDD, 0 GB, Failed)

能够看到，命名方式跟在LINUX下的基本同样。

 

而后删之

[root@localhost:/opt/smartstorageadmin/ssacli/bin] ./ssacli controller slot=0 Array C delete forced Warning: Deleting an array can cause other array letters to become renamed. E.g. Deleting array A from arrays A,B,C will result in two remaining arrays A,B ... not B,C

 

 

在查看已经没了。红灯也变蓝了

 

[root@localhost:/opt/smartstorageadmin/ssacli/bin] ./ssacli ctrl slot=0 pd all show Smart Array B120i SATA RAID in Slot 0 (Embedded) Array A physicaldrive 1I:0:1 (port 1I:box 0:bay 1, SATA HDD, 3 TB, OK) physicaldrive 2I:0:2 (port 2I:box 0:bay 2, SATA HDD, 3 TB, OK) Array B physicaldrive 3I:0:3 (port 3I:box 0:bay 3, SATA HDD, 3 TB, OK) physicaldrive 4I:0:4 (port 4I:box 0:bay 4, SATA HDD, 3 TB, OK) 

 

 

 

最后放一个帮助显示的信息

 

[root@localhost:/opt/smartstorageadmin/ssacli/bin] ./ssacli help CLI Syntax A typical SSACLI command line consists of three parts: a target device, a command, and a parameter with values if necessary. Using angle brackets to denote a required variable and plain brackets to denote an optional variable, the structure of a typical SSACLI command line is as follows: <target> <command> [parameter=value] <target> is of format: [controller all|slot=#|serialnumber=#] [array all|<id>] [physicaldrive all|allunassigned|[#:]#:#|[#:]#:#-[#:]#:#] [ssdphysicaldrive all|allunassigned|[#:]#:#|[#:]#:#-[#:]#:#] [logicaldrive all|#] [enclosure all|#:#|serialnumber=#] [licensekey all|<key>] [ssdinfo] Note 1: The #:#:# syntax is only needed for systems that specify port:box:bay. Other physical drive targeting schemes are box:bay and port:id. Example targets: ("CN0" is a sample port name that may be different depending on the controller) controller slot=5 controller serialnumber=P21DA2322S controller slot=7 array A controller slot=5 logicaldrive 5 controller slot=5 physicaldrive 1:5 controller slot=5 physicaldrive CN0:2:3 controller slot=5 ssdphysicaldrive all controller slot=5 enclosure CN0:1 show controller slot=5 licensekey XXXXX-XXXXX-XXXXX-XXXXX-XXXXX For detailed command information type any of the following: help add help create help delete help diag help flash help heal help modify help remove help shorthand help show help target help rescan help version Encryption related commands: help ctrlpasswdstate help clearencryptionconfig help encode help encrypt help enableencryption help encryption help eula help fwlock help import help instantsecureerase help localkeymanagermode help login help logout help recoverpassword help rekey help remotekey help removectrlpasswd help rescankeys help setmasterkeycache help setctrlpasswd help setpasswd help setrecoveryparams help unlockvolumes Help also accepts commonly used CLI parameters and SSA keywords. Adding additional keywords will further filter the help output. Examples: help migrate help expand help extend help <keyword> <keyword> ... <keyword>

 

 

有什么不肯定的能够直接用help 命令。好比查看 del怎么用

 

root@localhost:/opt/smartstorageadmin/ssacli/bin] ./ssacli help del <target> delete [forced] [override] The delete command deletes part of an existing configuration. If performing a clear configuration of the entire controller (i.e. ctrl slot=1 delete), the "override" option may be specified to allow mounted volumes to be removed. The target can be any valid individual controller, array or logical drive target. If the forced parameter is not present, the user will be prompted before deletion. If the forced parameter is present there will be no prompt. NOTE: Deleting the last logical drive in an array will cause the array to be deleted as well. WARNING: Deleting an array can cause other array letters to become renamed. E.g. Deleting array A from arrays A,B,C will result in two remaining arrays A,B not B,C. Examples: controller slot=5 delete controller slot=5 array A delete forced controller slot=1 logicaldrive 2 delete controller slot=5 delete override controller slot=5 delete forced override ------------------------------------------------------------- [root@localhost:/opt/smartstorageadmin/ssacli/bin] ./ssacli controller slot=0 Array C delete forced Warning: Deleting an array can cause other array letters to become renamed. E.g. Deleting array A from arrays A,B,C will result in two remaining arrays A,B ... not B,C

 

 

操做Raid有危险。肯定明确知道命令的做用在使用。

操做Raid有危险。肯定明确知道命令的做用在使用。