【iCore1S 双核心板_ARM】例程十六：USB_MSC实验——虚拟U盘

实验步骤：

一、将SD卡插在SD卡槽中。

二、将跳线冒跳至USB_Device，将USB_Device经过Micor USB线与USB主机（电脑）相连。

三、烧写程序，个人电脑中将出现一个磁盘。

实验现象：

核心代码：

int main(void)
{

  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration----------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_SDIO_SD_Init();
  MX_USB_DEVICE_Init();
  /* USER CODE BEGIN 2 */

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
  /* USER CODE END WHILE */

  /* USER CODE BEGIN 3 */
        LED_RED_ON;
        LED_GREEN_OFF;
        LED_BLUE_OFF;
        HAL_Delay(500);
        LED_RED_OFF;
        LED_GREEN_ON;
        LED_BLUE_OFF;
        HAL_Delay(500);
        LED_RED_OFF;
        LED_GREEN_OFF;
        LED_BLUE_ON;
        HAL_Delay(500);        
  }
  /* USER CODE END 3 */

}

/*******************************************************************************
* Function Name  : STORAGE_Read_FS
* Description    : 
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
int8_t STORAGE_Read_FS (uint8_t lun, 
                        uint8_t *buf, 
                        uint32_t blk_addr,                       
                        uint16_t blk_len)
{
  /* USER CODE BEGIN 6 */ 
    uint32_t timeout = 10000;
    
    if(BSP_SD_ReadBlocks((uint32_t*)buf, blk_addr, blk_len, timeout) == USBD_OK){
            while(BSP_SD_GetCardState()!= MSD_OK)
            {
                if (timeout-- == 0)
                {
                    return -1;
                }
            }
    }    
      return (USBD_OK);
  /* USER CODE END 6 */ 
}

/*******************************************************************************
* Function Name  : STORAGE_Write_FS
* Description    :
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
int8_t STORAGE_Write_FS (uint8_t lun, 
                         uint8_t *buf, 
                         uint32_t blk_addr,
                         uint16_t blk_len)
{
  /* USER CODE BEGIN 7 */ 
    uint32_t timeout = 10000;
    
    if(BSP_SD_WriteBlocks((uint32_t*)buf, blk_addr, blk_len, timeout) == USBD_OK){
            while(BSP_SD_GetCardState()!= MSD_OK)
            {
                if (timeout-- == 0)
                {
                    return -1;
                }
            }
    }        
  return (USBD_OK);
  /* USER CODE END 7 */ 
}

实验方法及指导书:

连接：http://pan.baidu.com/s/1eRRzMs6 密码：59vk